3D Analytical Modeling of Hydraulic Fracturing Stimulated Reservoir Volume

2012 ◽  
Author(s):  
Guang Yu ◽  
Roberto Aguilera
Keyword(s):  
Hydraulic Fracturing ◽  
Analytical Modeling ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume

scholarly journals A numerical investigation on the performance of hydraulic fracturing in naturally fractured gas reservoirs based on stimulated rock volume

2020 ◽  
Vol 10 (8) ◽  
pp. 3333-3345
Author(s):  
Ali Al-Rubaie ◽  
Hisham Khaled Ben Mahmud
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Natural Fracture ◽  
Shear Stresses ◽  
Individual Element ◽  
Natural Fractures ◽  
Gas Reservoirs ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Naturally Fractured

Abstract All reservoirs are fractured to some degree. Depending on the density, dimension, orientation and the cementation of natural fractures and the location where the hydraulic fracturing is done, preexisting natural fractures can impact hydraulic fracture propagation and the associated flow capacity. Understanding the interactions between hydraulic fracture and natural fractures is crucial in estimating fracture complexity, stimulated reservoir volume, drained reservoir volume and completion efficiency. However, because of the presence of natural fractures with diffuse penetration and different orientations, the operation is complicated in naturally fractured gas reservoirs. For this purpose, two numerical methods are proposed for simulating the hydraulic fracture in a naturally fractured gas reservoir. However, what hydraulic fracture looks like in the subsurface, especially in unconventional reservoirs, remain elusive, and many times, field observations contradict our common beliefs. In this study, the hydraulic fracture model is considered in terms of the state of tensions, on the interaction between the hydraulic fracture and the natural fracture (45°), and the effect of length and height of hydraulic fracture developed and how to distribute induced stress around the well. In order to determine the direction in which the hydraulic fracture is formed strikethrough, the finite difference method and the individual element for numerical solution are used and simulated. The results indicate that the optimum hydraulic fracture time was when the hydraulic fracture is able to connect natural fractures with large streams and connected to the well, and there is a fundamental difference between the tensile and shear opening. The analysis indicates that the growing hydraulic fracture, the tensile and shear stresses applied to the natural fracture.

scholarly journals APPLICATION OF FRACTAL GEOMETRY IN EVALUATION OF EFFECTIVE STIMULATED RESERVOIR VOLUME IN SHALE GAS RESERVOIRS

Fractals ◽  
2017 ◽  
Vol 25 (04) ◽  
pp. 1740007 ◽  
Author(s):  
GUANGLONG SHENG ◽  
YULIANG SU ◽  
WENDONG WANG ◽  
FARZAM JAVADPOUR ◽  
MEIRONG TANG
Keyword(s):  
Hydraulic Fracturing ◽  
Shale Gas ◽  
Fractal Geometry ◽  
Fracture Network ◽  
Gas Reservoirs ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Adsorbed Gas ◽  
Shale Gas Reservoirs ◽  
Shale Reservoirs

According to hydraulic-fracturing practices conducted in shale reservoirs, effective stimulated reservoir volume (ESRV) significantly affects the production of hydraulic fractured well. Therefore, estimating ESRV is an important prerequisite for confirming the success of hydraulic fracturing and predicting the production of hydraulic fracturing wells in shale reservoirs. However, ESRV calculation remains a longstanding challenge in hydraulic-fracturing operation. In considering fractal characteristics of the fracture network in stimulated reservoir volume (SRV), this paper introduces a fractal random-fracture-network algorithm for converting the microseismic data into fractal geometry. Five key parameters, including bifurcation direction, generating length ([Formula: see text]), deviation angle ([Formula: see text]), iteration times ([Formula: see text]) and generating rules, are proposed to quantitatively characterize fracture geometry. Furthermore, we introduce an orthogonal-fractures coupled dual-porosity-media representation elementary volume (REV) flow model to predict the volumetric flux of gas in shale reservoirs. On the basis of the migration of adsorbed gas in porous kerogen of REV with different fracture spaces, an ESRV criterion for shale reservoirs with SRV is proposed. Eventually, combining the ESRV criterion and fractal characteristic of a fracture network, we propose a new approach for evaluating ESRV in shale reservoirs. The approach has been used in the Eagle Ford shale gas reservoir, and results show that the fracture space has a measurable influence on migration of adsorbed gas. The fracture network can contribute to enhancement of the absorbed gas recovery ratio when the fracture space is less than 0.2 m. ESRV is evaluated in this paper, and results indicate that the ESRV accounts for 27.87% of the total SRV in shale gas reservoirs. This work is important and timely for evaluating fracturing effect and predicting production of hydraulic fracturing wells in shale reservoirs.

Characterizing the Stimulated Reservoir Volume During Hydraulic Fracturing-Connecting the Pressure Fall-Off Phase to the Geomechanics of Fracturing

2018 ◽  
Vol 85 (10) ◽  
Author(s):  
Erfan Sarvaramini ◽  
Maurice B. Dusseault ◽  
Robert Gracie
Keyword(s):  
Hydraulic Fracturing ◽  
Fracture Network ◽  
Natural Fracture ◽  
Breakdown Pressure ◽  
Pressure Derivative ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Flow Capacity ◽  
Pressure Fall

Microseismic imaging of the hydraulic fracturing operation in the naturally fractured rocks confirms the existence of a stimulated volume (SV) of enhanced permeability. The simulation and characterization of the SV evolution is uniquely challenging given the uncertainty in the nature of the rock mass fabrics as well as the complex fracturing behavior of shear and tensile nature, irreversible plastic deformation and damage. In this paper, the simulation of the SV evolution is achieved using a nonlocal poromechanical plasticity model. Effects of the natural fracture network are incorporated via a nonlocal plasticity characteristic length, ℓ. A nonlocal Drucker–Prager failure model is implemented in the framework of Biot's theory using a new implicit C0 finite element method. First, the behavior of the SV for a two-dimensional (2D) geomechanical injection problem is simulated and the resulting SV is assessed. It is shown that breakdown pressure and stable fracturing pressure are the natural outcomes of the model and both depend upon ℓ. Next, the post-shut-in behavior of the SV is analyzed using the pressure and pressure derivative plots. A bilinear flow regime is observed and it is used to estimate the flow capacity of the SV. The results show that the flow capacity of the SV increases as ℓ decreases (i.e., as the SV behaves more like a single hydraulic fracture); however, for 0.1m≤ℓ≤1m, the calculated flow capacity indicates that the conductivity of the SV is finite. Finally, it is observed that as ℓ tends to zero, the flow capacity of the SV tends to infinity and the SV behaves like a single infinitely conducting fracture.

Modeling and Experiment on Permeability of Coal with Hydraulic Fracturing by Stimulated Reservoir Volume

2018 ◽  
Vol 52 (8) ◽  
pp. 2605-2615 ◽  
Author(s):  
Zhaolong Ge ◽  
Shihua Li ◽  
Zhe Zhou ◽  
Yiyu Lu ◽  
Binwei Xia ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume
Sign in / Sign up

Export Citation Format

Share Document