Constraining the Complexity of Stimulated Reservoir Volume during Multi-Stage Hydraulic Fracturing of Horizontal Wells through Inter-Well Pressure Hit Modeling

2017 ◽  
Author(s):  
A. Rangriz Shokri ◽  
R. J. Chalaturnyk ◽  
D. Bearinger ◽  
C. Virues ◽  
J. Lehmann
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Multi Stage

Analysis and Application of Multi-Stage Fracture Stimulation in Yanchang Oilfield

2014 ◽  
Vol 513-517 ◽  
pp. 4012-4015
Author(s):  
Feng Shen ◽  
Xi Yu Chen ◽  
Zhi Huang ◽  
Hong Jun Qiao
Keyword(s):  
Ordos Basin ◽  
Great Influence ◽  
Horizontal Wells ◽  
Yanchang Formation ◽  
Stimulated Reservoir Volume ◽  
Fracture Pressure ◽  
Reservoir Volume ◽  
Multi Stage ◽  
Fracture Interaction ◽  
Elastic Mechanics

The continental shale of Yanchang Formation in Ordos Basin is in complex facies. Being high in mud and low in brittle mineral, the reservoir quality is poor. Therefore multi-stage fracture stimulation has been applied there in horizontal wells. The fracture interval in horizontal well is a critical parameter and it has a great influence on the fracture interaction. Since the fracture interaction can directly determine the extent to which the stimulated reservoir volume (SRV) expands, its most necessary to study the mechanism of the effect. For this, a mathematical model based on elastic mechanics would be given. By using this model, we analyzed the influences on the fracturing work. An analysis of field data from Yanchang Oilfield shows that proper fracture interval can take good advantage of the fracture interaction so as to reduce the horizontal differential principal stress. However, exceeded fracture interaction may raise the fracture pressure. So the effect must be controlled by optimizing the fracture interval. To optimize the fracture interval, the results can be used to instruct the application of multi-stage fracture stimulation.

scholarly journals A numerical investigation on the performance of hydraulic fracturing in naturally fractured gas reservoirs based on stimulated rock volume

2020 ◽  
Vol 10 (8) ◽  
pp. 3333-3345
Author(s):  
Ali Al-Rubaie ◽  
Hisham Khaled Ben Mahmud
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Natural Fracture ◽  
Shear Stresses ◽  
Individual Element ◽  
Natural Fractures ◽  
Gas Reservoirs ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Naturally Fractured

Abstract All reservoirs are fractured to some degree. Depending on the density, dimension, orientation and the cementation of natural fractures and the location where the hydraulic fracturing is done, preexisting natural fractures can impact hydraulic fracture propagation and the associated flow capacity. Understanding the interactions between hydraulic fracture and natural fractures is crucial in estimating fracture complexity, stimulated reservoir volume, drained reservoir volume and completion efficiency. However, because of the presence of natural fractures with diffuse penetration and different orientations, the operation is complicated in naturally fractured gas reservoirs. For this purpose, two numerical methods are proposed for simulating the hydraulic fracture in a naturally fractured gas reservoir. However, what hydraulic fracture looks like in the subsurface, especially in unconventional reservoirs, remain elusive, and many times, field observations contradict our common beliefs. In this study, the hydraulic fracture model is considered in terms of the state of tensions, on the interaction between the hydraulic fracture and the natural fracture (45°), and the effect of length and height of hydraulic fracture developed and how to distribute induced stress around the well. In order to determine the direction in which the hydraulic fracture is formed strikethrough, the finite difference method and the individual element for numerical solution are used and simulated. The results indicate that the optimum hydraulic fracture time was when the hydraulic fracture is able to connect natural fractures with large streams and connected to the well, and there is a fundamental difference between the tensile and shear opening. The analysis indicates that the growing hydraulic fracture, the tensile and shear stresses applied to the natural fracture.

Investigation of Horizontal Wells with Multi-Stage Hydraulic Fracturing Technological Efficiency in the Development of Low-Permeability Oil Reservoirs

2021 ◽  
Author(s):  
Aleksander Valerievich Miroshnichenko ◽  
Valery Alekseevich Korotovskikh ◽  
Timur Ravilevich Musabirov ◽  
Aleksei Eduardovich Fedorov ◽  
Khakim Khalilovich Suleimanov
Keyword(s):  
Hydraulic Fracturing ◽  
Performance Indicators ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Productivity Index ◽  
Specific Mass ◽  
Horizontal Section ◽  
Technological Complexity ◽  
Multi Stage ◽  
Effective Development

Abstract The deterioration of the reservoir properties of potential oil and gas bearing areas on mature and green fields, as well as the increase in the volume of hard-to-recover reserves on low-permeable reservoirs set us new challenges in searching and using effective development technologies to maintain and even increase the oil production levels. Based on successful international experience, Russian oil and gas companies use horizontal wells (HW) with multi-stage hydraulic fracturing (MSHF) for the cost-effective development of low-permeable reservoirs. Thus, since the first pilot works of drilling technologies and completion of HW with MSHF in 2011, at the beginning of 2020, over 1,200 HW with MSHF were drilled and came on stream at the fields of LLC RN-Yuganskneftegaz, about half of which are at the exploitation play AS10-12 of the northern license territory (NLT) of the Priobskoye field. In searching the best technologies and engineering solutions, the company tested different lengths of horizontal section of HW, the number of hydraulic fracturing (HF) stages and distances between hydraulic fracturing ports, as well as different specific mass of the proppant per frac port. Recently, there has been a tendency in design solutions to increase the length of the HWs and the number of hydraulic fractures with a decreasing distance between the frac ports and a decreasing specific mass of the proppant per frac port. This work studies the actual and theoretical efficiency of HW with MSHF of various designs (different lengths of horizontal section of HW and the number of HF stages) and to assess the viability of increasing the technological complexity, as well as to analyze the actual impact of loading the proppant mass per port on performing HW with MSHF. The study is based on the results of the analysis of the factual experience accumulated over the entire history of the development of the exploitation play AS10-12 of the NLT of the Priobskoye field of the Rosneft Company. In studying the viability of increasing the technological complexity, especially, increasing the length of horizontal section of HW, increasing the number of HF stages, and reducing the distance between the frac ports: we discovered the typical methodological errors made in analyzing the efficiency of wells of various designs; we developed the methodology for analysis of the actual multiplicity of indicators of wells of various designs, in particular, HW with MSHF relative to deviated wells (DW) with HF; we carried out the statistical analysis of the actual values of the multiplicity of performance indicators and completion parameters of HW with MSHF of various designs relative to the surrounding DW with HF of the exploitation play AS10-12 of the NLT of the Priobskoye field; we performed the theoretical calculation of the multiplicity of the productivity coefficient for the HW with MSHF of various designs relative to DW with HF for the standard development system of the exploitation play AS10-12 of the NLT of the Priobskoye field; we compared the actual and theoretical results. The paper also presents the results of studying the actual effect of changes of proppant's mass per port on performance indicators of HW with MSHF of the same design and with an increase in the number of fractures of the hydraulic fracturing without changing the length of horizontal section of HW. As for performance indicators, being the basis for estimating the efficiency of HW with MSHF of various designs, we used the productivity index per meter of the effective reservoir thickness and the cumulative fluid production per meter of the effective reservoir thickness per a certain period of operation. And as the completion parameters, we used the length of the horizontal section of HW, the number of HF stages, the distance between the frac ports, and the specific mass of the proppant per meter of the effective reservoir thickness per frac port. The results of this work are the determining vector of development for future design decisions in improving the efficiency of HW with MSHF.

Technological solutions for well construction in high-viscous shale hydrocarbon fields

2021 ◽  
pp. 52-62
Author(s):  
V. P. Ovchinnikov ◽  
O. V. Rozhkova ◽  
S. N. Bastrikov ◽  
D. S. Leontiev ◽  
P. V. Ovchinnikov
Keyword(s):  
High Temperature ◽  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
High Viscosity ◽  
Horizontal Section ◽  
High Temperature And Pressure ◽  
Multi Stage ◽  
Hydrocarbon Fields ◽  
Temperature And Pressure ◽  
Calcium Hydrosilicate

The article discusses the main technological processes of well construction for the production of high-viscosity hydrocarbons from productive lowporosity reservoirs with high temperature and pressure conditions, which include shale deposits of Bazhenov formation. According to the results of the review and analysis of existing solutions in the development of this deposits, the following measures were justified and proposed: construction of branched multi-hole azimuth horizontal wells, implementation of selective multi-stage hydraulic fracturing in the productive formation; the use of oil-based process fluids when opening the reservoir, the use of plugging materials for isolation of the reservoir, the hardening product of which is represented by thermally stable hydrate phases (hydrobasic hydrosilicates). Вranched wells have a long horizontal end (about 1 000 meters or more). Only a part of the horizontal section works effectively, which is the basis for the development and application of the staged, both in time and along the strike, hydraulic fracturing method. At the level of the invention, a method and apparatus for carrying out multistage selective hydraulic fracturing in wells with horizontal completion have been developed. The article describes a method for implementing multistage selective hydraulic fracturing, comparing this method with the existing ones. Much attention is given to the need to use hydrocarbon-based solutions for the initial opening the reservoir, to use cement slurries from composite materials to separate the reservoir, the hardening product of which is a stone formed by low-basic calcium hydrosilicate.

The Use of Tracer Technologies for Well Monitoring with Multi-Stage Hydraulic Fracturing on Bolshetirskoye Oil Field

2021 ◽  
Author(s):  
Ivan Krasnov ◽  
Oleg Butorin ◽  
Igor Sabanchin ◽  
Vasiliy Kim ◽  
Sergey Zimin ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
Hydraulic Fracture ◽  
Horizontal Wells ◽  
Pilot Project ◽  
Oil Field ◽  
Well Completion ◽  
Construction Design ◽  
Multi Stage ◽  
Urgent Task

Abstract With the development of drilling and well completion technologies, multi-staged hydraulic fracturing (MSF) in horizontal wells has established itself as one of the most effective methods for stimulating production in fields with low permeability properties. In Eastern Siberia, this technology is at the pilot project stage. For example, at the Bolshetirskoye field, these works are being carried out to enhance the productivity of horizontal wells by increasing the connectivity of productive layers in a low- and medium- permeable porous-cavernous reservoir. However, different challenges like high permeability heterogeneity and the presence of H2S corrosive gases setting a bar higher for the requirement of the well construction design and well monitoring to achieve the maximum oil recovery factor. At the same time, well and reservoir surveillance of different parameters, which may impact on the efficiency of multi-stage hydraulic fracturing and oil contribution from each hydraulic fracture, remains a challenging and urgent task today. This article discusses the experience of using tracer technology for well monitoring with multi-stage hydraulic fracturing to obtain information on the productivity of each hydraulic fracture separately.

Sign in / Sign up

Export Citation Format

Share Document