scholarly journals An all-solid-state Ion-Selective Electrode with Ag3AsO4 as the Sensitive Membrane for Detecting Arsenate in Aqueous Environments

2019 ◽  
pp. 9647-9660
Author(s):  
Yifan Zhou ◽  
Keyword(s):  
Solid State ◽  
Ion Selective Electrode ◽  
Selective Electrode ◽  
Aqueous Environments ◽  
Sensitive Membrane

scholarly journals Ionic Liquid-Multiwalled Carbon Nanotubes Nanocomposite Based All Solid State Ion-Selective Electrode for the Determination of Copper in Water Samples

Water ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 2869
Author(s):  
Cecylia Wardak ◽  
Karolina Pietrzak ◽  
Małgorzata Grabarczyk
Keyword(s):  
Carbon Nanotubes ◽  
Ionic Liquid ◽  
Solid State ◽  
Multiwalled Carbon Nanotubes ◽  
Water Samples ◽  
Limit Of Detection ◽  
Ion Selective Electrode ◽  
Selective Electrode ◽  
Multiwalled Carbon ◽  
Copper Determination

A new copper sensitive all solid-state ion-selective electrode was prepared using multiwalled carbon nanotubes-ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) nanocomposite as an additional membrane component. The effect of nanocomposite content in the membrane on the electrode parameters was investigated. The study compares, among others, detection limits, sensitivity, and the linearity ranges of calibration curves. Content 6 wt.% was considered optimal for obtaining an electrode with a Nernstian response of 29.8 mV/decade. An electrode with an optimal nanocomposite content in the membrane showed a lower limit of detection, a wider linear range and pH range, as well as better selectivity and potential stability compared to the unmodified electrode. It was successfully applied for copper determination in real water samples.

Determination of Iodide in Feeds and Plants by Ion-Selective Electrode Analysis

1971 ◽  
Vol 54 (4) ◽  
pp. 760-763
Author(s):  
William L Hoover ◽  
James R Melton ◽  
Peggy A Howard
Keyword(s):  
Ionic Strength ◽  
Solid State ◽  
Necessary Conditions ◽  
Ion Selective Electrode ◽  
Phosphate Solution ◽  
Selective Electrode ◽  
Aoac Method ◽  
Low Levels ◽  
High Concentrations

Abstract A method for determining low levels of iodide in feeds and plants is proposed. The samples are mixed with a 10% phosphate solution to maintain relatively constant ionic strength and pH and analyzed with a solid-state iodide electrode. Ashing is not required and there are no significant interferences by ions commonly found in feeds. The method is accurate in determining iodide content ranging from 10.0 ppm to high concentrations. Necessary conditions for storing and cleaning the electrodes are described. The proposed method is rapid and results compare favorably with AOAC method 7.091.

Sign in / Sign up

Export Citation Format

Share Document