scholarly journals First evaluation of growth parameters in clonal test with wild cherry

2008 ◽  
Vol 53 (No. 2) ◽  
pp. 57-65 ◽  
Author(s):  
M. Hajnala ◽  
M. Lstibůrek ◽  
J. Kobliha

A 6-year-old clonal trial with 13 clones of wild cherry (<i>Prunus avium</i> L.) was evaluated during the summer of 2004 at 6 different sites in the Czech Republic. Observed traits were the stem height, stem diameter, health status, and mortality. The mixed linear model was implemented with either independent or the autoregressive error structure. The later provided better fit to the data. At this age, only one clone outperformed the remaining ones in volume production. Suggestions for future research activities are provided that should lead to the establishment of long-term breeding programs with wild cherry in the Czech Republic.

2019 ◽  
Vol 48 (No. 5) ◽  
pp. 202-218 ◽  
Author(s):  
J. Kobliha

The paper widely introduces European experience in wild cherry breeding because it is the first one from a prepared series of articles aimed at wild cherry breeding in the Czech Republic. Beginnings of wild cherry breeding program for the Czech forestry are described. Plus trees were certified, seed orchards, clone archives, progeny and clonal tests were established. Clones were tested for fl owering of grafts in reproductive plantations. Progenies and clones were tested for growth parameters in progeny and clonal tests. Progenies and clones in every breeding plantation were tested for damage by aphids.


2017 ◽  
Vol 48 (2) ◽  
pp. 92-97
Author(s):  
K. Sharma ◽  
J. Korecký ◽  
E.D. Patrizio Soldateschi ◽  
P. Sedlák

Abstract Wild cherry (Prunus avium L.) S-genotyping is aimed to uncover and thus make it possible to select appropriate genotypes applicable in establishing commercial plantations and advanced forest tree breeding activities. The general and long-term aim is to increase genetic gain in economically valuable traits while maintaining sufficient genetic variability (represented by diverse S-alleles in population). We genotyped 123 accessions from wild cherry growing areas in the Czech Republic using polymerase chain reaction based length polymorphisms detection of S-RNase and SFB genes. The studied plant material revealed 18 different S-haplotypes, 54 S-genotypes corresponded to 25 defined incompatibility groups of cultivated sweet cherry. Eighteen unique S-genotypes were designated to group ‘0’ as a universal pollinator. Eleven new incompatibility groups were found out, of which four were cross-compatible with sweet cherry cultivars. The most frequent was a new incompatibility group S14S21 followed by the group S12S14. The haplotypes S14 (13%) and S1 (10%) were the most frequent whereas S20 was less frequent in the wild populations of cherry. The present study of S-genotyping in the wild cherry population reveals the genetic diversity structure of natural populations and hopefully will help define the breeding strategy including more accurate planning activities such as the optimal seed design of orchards.


Plant Disease ◽  
2020 ◽  
Author(s):  
Yeonhwa Jo ◽  
Hoseong Choi ◽  
Jin Kyong Cho ◽  
Won Kyong Cho

Cherry virus F (CVF) is a tentative member of the genus Fabavirus in the family Secoviridae, consisting of two RNA segments (Koloniuk et al. 2018). To date, CVF has been documented in only sweet cherry (Prunus avium) in the Czech Republic (Koloniuk et al. 2018), Canada, and Greece. In May 2014, we collected leaf samples from four symptomatic (leaf spots and dapple fruits) and two asymptomatic Japanese plum cultivars (Sun and Gadam) grown in an orchard in Hoengseong, South Korea, to identify viruses and viroids infecting plum trees. Total RNA from individual plum trees was extracted using two commercial kits: Fruit-mate for RNA Purification Kit (Takara, Shiga, Japan) and RNeasy Plant Mini Kit (Qiagen, Hilden, Germany). We generated six mRNA libraries from the six different plum cultivars for RNA-sequencing using the TruSeq RNA Library Preparation Kit v2 (Illumina, CA, U.S.A.) as described previously (Jo et al. 2017). The mRNA libraries were paired-end (2 X 100 bp) sequenced with a HiSeq 2000 system (Macrogen, Seoul, Korea). The raw sequence reads were de novo assembled by Trinity program v. 2.8.6, with default parameters (Haas et al. 2013). The assembled contigs were subjected to BLASTX search against the non-redundant protein database in NCBI. Of the two asymptomatic cultivars, the transcriptome of asymptomatic plum cv. Gadam contained five contigs specific to CVF. Two and three contigs were specific to CVF RNA1 (2,571 reads, coverage 42.15%) and RNA2 (2,025 reads, coverage 53.04%), respectively. The size of these five contigs ranged from 241 to 5,986 bp. Contigs of 5,986 and 3,867 bp in length, referred to as CVF isolate Gadam RNA1 (GenBank MN896996) and RNA2 (GenBank MN896995), respectively, were subjected to BLASTP search against NCBI’s non-redundant protein database. The results showed that the polyprotein sequences of RNA1 and RNA2 shared 95.3% and 93.11% amino acid identities with isolates SwC-H_1a from the Czech Republic (GenBank acc. no. AWB36326) and Stac-3B_c8 from Canada (AZZ10055), respectively. To confirm the infection of CVF in cv. Gadam, RT-PCR was conducted using CVF RNA1-specific primers designed based on the CVF reference genome sequences (MH998210 and MH998216), including 5’-CCACCAAATAGGCAAGAGGTCAC-3’ (position 3190–3212) and 5’-CACAATCACCATCAATGGTCTCTGC-3’ (position 3742–3766), and CVF RNA2-specific primers, including 5’-CTGCTTTATGATGCTAGACATCAAGATG-3’ (position 1015–1042) and 5’-ACAATAGGCATGCTCATCTCAACCTC-3’ (position 1594–1619). We amplified 577-bp RNA1-specific and 605-bp RNA2-specific amplicons that were cloned and then performed Sanger sequencing. Sequencing of the cloned amplicons for isolate Gadam RNA1 (GenBank MN896993) and RNA2 (GenBank MN896994) revealed values of 99.48% and 99.17% nucleotide identity to that of RNA1 and RNA2 determined by high-throughput sequencing, respectively. Additionally, we tested five plants for each of the six plum cultivars grown in the same orchard. The detection of CVF was carried out through PCR using the primers and protocol described above. Of the 30 trees, CVF was detected in three trees of cv. Gadam by both primer pairs. To our knowledge, this is the first report of CVF infecting Japanese plum and the first report of the virus in Korea. However, its prevalence in other Prunus species, including apricot, European plum, and peach, should be further elucidated.


2017 ◽  
Vol 63 (No. 6) ◽  
pp. 263-274
Author(s):  
Buriánek Václav ◽  
Novotný Petr ◽  
Dostál Jaroslav

This study is focused on testing progenies of common and narrow-leaved ash based on the measurement of provenance trial plots established in various forest regions under different site conditions within the Czech Republic in the spring of 1999. Height and diameter growth of 35 provenances was measured and evaluated at the stand age of 10–14 years. The main goal of this research is to analyse and compare differences in growth between progenies originating from alluvial versus scree habitats as well as between the two evaluated ash species. Moreover, the influence of localities on growth was tested using standard provenances planted on all plots. The results of the last measurement were compared with those from the first survey in 2000 at the age of 4–5 years (1 year after planting). With the exception of DBH on the Koněprusy plot, statistically significant differences in height and diameter growth between provenances were verified. The results confirmed a very strong site influence on growth. The main conclusions indicate significant differences in growth parameters between provenances, faster growth of alluvial versus scree provenances on most lowland plots, and generally faster growth of narrow-leaved ash as compared to common ash.


2019 ◽  
Vol 10 (3) ◽  
pp. 784-802
Author(s):  
Felipe Martinez

Purpose The purpose of this paper is to present the findings of an empirical research on the leanness of the home services sector in the Czech Republic. The automotive sector provides reference to argue the numerical outcomes. Design/methodology/approach The research uses a specifically designed assessment tool (Lean Index – LI) to determine the sector’s leanness level. Referring to the results from both sectors, the paper draws conclusions about the current leanness level of home services providers. Findings The proposed LI indicates a value of 69.50 per cent for home services providers, whereas the LI for the automotive industry suppliers is 82.88 per cent. This suggests that there are large opportunities for the implementation of lean management in the home services sector. However, the main challenge is to introduce a continuous improvement approach to these companies. Research limitations/implications The sample size limits the generalisation of the research results. However, this paper represents the first empirical attempt to implement a large-scale survey. The results are limited to the Czech Republic. However, parties from other countries have indicated interest to replicate the research. Practical implications This research provides first empirical findings on the possibilities of implementing lean in the home services sector. Future research projects in other sectors will have the opportunity to make use of the LI assessment tool. Originality/value The paper presents the first approach of lean management into the home services sector. It provides valuable information to specialised institutions in the sector about the possibilities of lean management in the sector. It also provides an overview of the sector for practitioners and academics willing to pioneer lean in the sector.


2001 ◽  
Vol 5 (3) ◽  
pp. 311-326 ◽  
Author(s):  
A. Prechtel ◽  
C. Alewell ◽  
M. Armbruster ◽  
J. Bittersohl ◽  
J. M. Cullen ◽  
...  

Abstract. Following the decline in sulphur deposition in Europe, sulphate dynamics of catchments and the reversibility of anthropogenic acidification of soils and freshwaters became of major interest. Long-term trends in sulphate concentrations and fluxes in precipitation/throughfall and freshwaters of 20 European catchments were analysed to evaluate catchment response to decreasing sulphate deposition. Sulphate deposition in the catchments studied declined by 38-82% during the last decade. Sulphate concentrations in all freshwaters decreased significantly, but acidification reversal was clearly delayed in the German streams. In Scandinavian streams and Czech/Slovakian lakes sulphate concentrations responded quickly to decreased input. Sulphate fluxes in run-off showed no clear trend in Germany and Italy but decreased in Scandinavia, the Czech Republic and Slovakia. The decrease, however, was less than the decline in input fluxes. While long-term sulphate output fluxes from catchments were generally correlated to input fluxes, most catchments started a net release of sulphate during the early 1990s. Release of stored sulphate leads to a delay of acidification reversal and can be caused by four major processes. Desorption and excess mineralisation were regarded as the most important for the catchments investigated, while oxidation and weathering were of lesser importance for the long-term release of sulphate. Input from weathering has to be considered for the Italian catchments. Sulphate fluxes in German catchments, with deeply weathered soils and high soil storage capacity, responded more slowly to decreased deposition than catchments in Scandinavia and the Czech Republic/Slovakia, which have thin soils and relatively small sulphate storage. For predictions of acidification reversal, soil characteristics, sulphur pools and their dynamics have to be evaluated in future research. Keywords: acidification reversal, sulphur, sulphate release, Europe, catchments, deposition, lake, stream


Author(s):  
Lucie Vnoučková ◽  
Hana Urbancová

Knowledge economy regards employee knowledge as a most important asset. It is a priority task to ensure systematic knowledge continuity of those employees who are the holders of critical knowledge. The aim of the article is to analyse the causes of mobility of knowledge workers and categorise types of employees and mobility according to the future development of an employee’s career. The research areas, i.e. ensuring knowledge continuity and employee turnover were analysed based on the premise of significant relation between those two areas. The data were collected in organizations in the Czech Republic. Surveys were drawn across sectors to ensure representativeness of the outcomes. The outputs revealed two basic approaches to maintaining knowledge inside organizations. Employees can be divided into knowledge workers and remainder, who seek only security. A knowledge worker who decides to transfer is not motivated by the amount of salary (they do not mind a lower level of remuneration); on the contrary they suffer due to an unclear vision on the part of the organization, where they used to work; they cannot stay in conditions where there is no possibility to participate on personal growth. Future research in this area should focus on the return of investments in the knowledge and employee learning, training and retention.


E-psychologie ◽  
2021 ◽  
Vol 15 (4) ◽  
pp. 92-94
Author(s):  
Kristýna Rusnáková ◽  
Miloslav Stehlík

The CASRI Psychological Laboratory is part of the scientific and service department of the Physical Education and Sport, which provides service, methodological, advisory, and consultancy services. The laboratory is involved in research tasks aimed at the development and validation of methods selection and training of military personnel for the needs of the Ministry of Defence and the Czech Army of the Czech Republic. It is also involved in educational and methodological activities. In addition to research activities provides support to top athletes from the national sports team and their coaches.


2019 ◽  
Vol 63 (3-4) ◽  
pp. 96-104
Author(s):  
Hana Slovik-Vávrová ◽  
Radomír Slovik

The article presents the results of the research activities of Hana Slovik-Vávrová concerning the mapping of preserved all-metal brass book bindings in the collections of institutions in the Czech Republic. She has recorded a total of 145 of these exceptional book bindings from between the end of the 18th century and the 1920s, coming from 18 organisations. All-metal book bindings have not been devoted enough attention although they represent a very interesting chapter in the history of book binding. An outcome of this work is a comprehensive description and detailed documentation of all researched all-metal book bindings. A valuable part is a catalogue of book bindings and of ornaments used in the decoration of all-metal book bindings.


Sign in / Sign up

Export Citation Format

Share Document