Preparation And Characterization Of Pzt Thin Films On Ruox/Pt Multilayered Electrode By Mocvd

1996 ◽  
Vol 446 ◽  
Author(s):  
Tae‐Young Kim ◽  
Daesig Km ◽  
Chee Won Chung ◽  
June Key Lee ◽  
Inyong Song
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Inductively Coupled Plasma ◽  
Ferroelectric Properties ◽  
Strong Dependence ◽  
Chemical Vapor ◽  
Lead Zirconate ◽  
Organic Chemical ◽  
Substrate Thickness ◽  
Pzt Thin Films

AbstractFerroelectric lead zirconate titanate (PZT) thin films have been successfully prepared on a RuOx/Pt multilayered electrode by Metal Organic Chemical Vapor Deposition (MOCVD). The multilayered electrode was introduced to enhance device reliability for FRAM and DRAM applications. The variations in the microstructure and ferroelectric properties of the PZT thin films were investigated as a function of substrate thickness. The microstructure of the PZT thin films was found to have a strong dependence on the surface morphology of the substrate. The control of microstructure resulted in improved ferroelectric properties. The endurance of the Pt/RuOx/PZT/RuOx/Pt capacitor was also maintained up to 1010 cycles without any serious degradation. The ferroelectric capacitors on 4” wafer were integrated by using Inductively Coupled Plasma Reactive Ion Etching (ICP RIE) system and the fully processed MOCVD PZT capacitors showed good ferroelectric properties (Vc=0.57V, ργ=22μC/cm2 respectively).

scholarly journals Local Fatigue Evaluation in PZT Thin Films with Nanoparticles by Piezoresponse Force Microscopy

2012 ◽  
Vol 2012 ◽  
pp. 1-9
Author(s):  
B. S. Li
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Precursor Solution ◽  
Grain Morphology ◽  
Piezoresponse Force Microscopy ◽  
Lead Zirconate ◽  
Fatigue Performance ◽  
Pzt Thin Films

Lead zirconate titanate (PZT) thin films with the morphotropic phase boundary composition (Zr/Ti = 52/48) have been prepared using a modified diol-based sol-gel route by introducing 1–5 mol% barium titanate (BT) nanoseeds into the precursor solution on platinized silicon substrates (Pt/Ti/SiO2/Si). Macroscopic electric properties of PZT film with nanoparticle showed a significant improvement of ferroelectric properties. This work aims at the systematic study of the local switching polarization behavior during fatigue in PZT films with and without nanoparticles by using very recent developed scanning piezoelectric microscopy (SPM). We show that the local fatigue performance, which is characterized by variations of local piezoloop with electric cycles, is significantly improved by adding some nanoseeds. It has been verified by scanning electron microscope (SEM) that the film grain morphology changes from columnar to granular structure with the addition of the nanoseeds. On the other hand, the existence of PtxPb transition phase, which existed in interface at early crystallization stage of pure PZT thin film, deteriorates the property of the interface. These microstructures and the interfaces of these films significantly affect the electrons injection occurred on the interfaces. The domain wall pinning induced by injected electrons and the succeeding penetration into the films is discussed to explain the fatigue performance.

EFFECT OF PRE-HEATING TEMPERATURE ON THE CHARACTERISTICS OF PZT THIN FILMS GROWN BY USING A TRIOL SOL–GEL ROUTE

2007 ◽  
Vol 14 (02) ◽  
pp. 229-234
Author(s):  
SARAWUT THOUNTOM ◽  
MANOCH NAKSATA ◽  
KENNETH MACKENZIE ◽  
TAWEE TUNKASIRI
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Heating Temperature ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Hysteresis Loops ◽  
Lead Zirconate ◽  
Pzt Thin Films ◽  
Pzt Films ◽  
Ferroelectric Hysteresis

Lead zirconate titanate (PZT) films with compositions near the morphotropic phase boundary were fabricated on Pt (111)/ Ti / SiO 2/ Si (100) using the triol sol–gel method. The effect of the pre-heating temperature on the phase transformations, microstructures, electrical properties, and ferroelectric properties of the PZT thin films was investigated. Randomly oriented PZT thin films pre-heated at 400°C for 10 min and annealed at 600°C for 30 min showed well-defined ferroelectric hysteresis loops with a remnant polarization of 26.57 μC/cm2 and a coercive field of 115.42 kV/cm. The dielectric constant and dielectric loss of the PZT films were 621 and 0.0395, respectively. The microstructures of the thin films are dense, crack-free, and homogeneous with fine grains about 15–20 nm in size.

The Role of Processing Parameters in Variation of Microstruture of Sol-Gel Derived Lead Zirconate Titanate Thin Films

1998 ◽  
Vol 541 ◽  
Author(s):  
Chang Jung Kim ◽  
Tae-Young Kim ◽  
Ilsub Chung ◽  
In Kyung Yoo
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Secondary Phase ◽  
Processing Parameters ◽  
Lead Zirconate ◽  
Test System ◽  
Pzt Thin Films ◽  
Force Microscopy

AbstractThe PZT thin films were fabricated to investigate the effect of sol-gel processing parameters on the physical and the electrical properties. The films were made with different amount of excess Pb precursors and drying temperatures, and then annealed in various ambients. The physical properties of the films such as crystallinity and microstructure were evaluated using x-ray diffraction, scanning electron microscopy and atomic force microscopy. The ferroelectric properties and current density characteristics of the films were investigated using a standarized feiroelectric test system and pA meter, respectively. It is found that the drying temperature was playing a key role in the formation of the secondary phase on the PZT thin films. In addition, it turned out that the use of nitrogen as an annealing ambient promoted overall ferroelectric properties, when compared to oxygen ambients.

Organometallic Chemical Vapor Deposition of Lead Zirconate-Titanate Thin Films

1993 ◽  
Vol 310 ◽  
Author(s):  
M. De Keuser ◽  
P.J. Van Veldhoven ◽  
G.J.M. Dorman
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Lead Zirconate Titanate ◽  
Vapor Deposition ◽  
Growth Parameters ◽  
Ferroelectric Properties ◽  
Chemical Vapor ◽  
Lead Zirconate ◽  
Titanium Tetra Isopropoxide ◽  
Processing Steps

AbstractIn this paper the growth of PbZrxTi1-xO3 on 10 cm platinized silicon wafers using the precursors cursors tetra-ethyl-lead, titanium-tetra-isopropoxide, or titanium-tetra-tertiarybutoxide and zirconium-tetra-tertiarybutoxide will be discussed in some detail. The composition of the films as a function of growth parameters will be treated and the accompanying change in the ferroelectric properties will be discussed. For device manufacturing, the PbZrxTi1-xO3 films are subjected to a number of processing steps. Some results for partially processed wafers will be presented. Also, preliminary results of depositions on 15 cm wafers will be given.

Effect of Pb Excess Content on Microstructure and Electrical Properties of Sol Gel Derived PZT Thin Films

1999 ◽  
Vol 596 ◽  
Author(s):  
Zhan-jie Wang ◽  
Ryutaro Maeda ◽  
Kaoru Kikuchi
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Perovskite Phase ◽  
Ferroelectric Properties ◽  
Sol Gel ◽  
Lead Zirconate ◽  
Pzt Thin Films ◽  
Starting Solution ◽  
Pzt Films

AbstractLead zirconate titanate (PZT) thin films were fabricated by a three-step heat-treatment process which involves the addition of -10, 0 and 10 mol% excess Pb to the starting solution and spin coating onto Pt/Ti/SiO2/Si substrates. Crystalline phases as well as preferred orientations in PZT films were investigated by X-ray diffraction analysis (XRD). The microstructure and composition of the films were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron probe microanalysis (EPMA), respectively. The well-crystallized perovskite phase and the (100) preferred orientation were obtained by adding 10% excess Pb to the starting solution. It was found that PZT films to which 10% excess Pb was added had better electric properties. The remanent polarization and the coercive field of this film were 34.8 μC/cm2 and 41.7 kV/cm, while the dielectric constant and loss values measured at 1 kHz were approximately 1600 and 0.04, respectively. Dielectric and ferroelectric properties were correlated to the microstructure of the films.

Improvement of Ferroelectric Properties of Lead Zirconate Titanate Thin Films by Ion-substitution using Rare-earth Cations

2004 ◽  
Vol 830 ◽  
Author(s):  
Hiroshi Nakaki ◽  
Hiroshi Uchida ◽  
Shoji Okamoto ◽  
Shintaro Yokoyama ◽  
Hiroshi Funakubo ◽  
...  
Keyword(s):  
Thin Films ◽  
Rare Earth ◽  
Lead Zirconate Titanate ◽  
Ferroelectric Property ◽  
Ferroelectric Properties ◽  
Lead Zirconate ◽  
Crystal Anisotropy ◽  
Pzt Film ◽  
Zirconate Titanate ◽  
Ion Substitution

ABSTRACTRare-earth-substituted tetragonal lead zirconate titanate thin films were synthesized for improving the ferroelectric property of conventional lead zirconate titanate. Thin films of Pb1.00REx (Zr0.40Ti0.60)1-(3x /4)O3 (x = 0.02, RE = Y, Dy, Er and Yb) were deposited on (111)Pt/Ti/SiO2/(100)Si substrates by a chemical solution deposition (CSD). B-site substitution using rare-earth cations described above enhanced the crystal anisotropy, i.e., ratio of PZT lattice parameters c/a. Remanent polarization (Pr) of PZT film was enhanced by Y3+-, Dy3+- and Er3+-substitution from 20 μC/cm2 up to 26, 25 and 26 μC/cm2 respectively, while ion substitution using Yb3+ degraded the Pr value down to 16 μC/cm2. These films had similar coercive fields (Ec) of around 100 kV/cm. Improving the ferroelectric property of PZT film by rare-earth-substitution would be ascribed to the enhancement of the crystal anisotropy. We concluded that ion substitution using some rare-earth cations, such as Y3+, Dy3+ or Er3+, is one of promising technique for improving the ferroelectric property of PZT film.

Microstructure of Solution-Processed Lead Zirconate Titanate (PZT) Thin Films

1991 ◽  
Vol 74 (6) ◽  
pp. 1455-1458 ◽  
Author(s):  
Altaf H. Carim ◽  
Bruce A. Tuttle ◽  
Daniel H. Doughty ◽  
Sheri L. Martinez
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Lead Zirconate ◽  
Solution Processed ◽  
Pzt Thin Films ◽  
Zirconate Titanate

Characterization of Highly Textured PZT Thin Films Grown on LaNiO3 Coated Si Substrates by MOCVD

1997 ◽  
Vol 493 ◽  
Author(s):  
C. H. Lin ◽  
B. M. Yen ◽  
Haydn Chen ◽  
T. B. Wu ◽  
H. C. Kuo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Fatigue Behavior ◽  
Chemical Vapor ◽  
Dielectric Constants ◽  
Preferential Orientation ◽  
Organic Chemical ◽  
Pzt Thin Films ◽  
Si Substrates ◽  
Transmission Electron

ABSTRACTHighly textured PbZrxTi1−xO3 (PZT) thin films with x= 0-0.6 were grown on LaNiO3 coated Si substrates at 600 °C by metal-organic chemical vapor deposition (MOCVD). The preferred crystalline orientation of PZT thin films with various Zr concentration were characterized by X-ray diffraction (XRD). Microstructures were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The dielectric constants, hysteresis and fatigue behavior of these thin films were also measured. The relationship between growth rate and the preferential orientation is discussed. Furthermore, the dependence of the electrical properties on Zr concentration and preferential orientation is demonstrated.

Effect of Pb Content on the Fatigue Properties of D.C. Reactive Sputtering-Derived PZT Thin Films

2006 ◽  
Vol 326-328 ◽  
pp. 613-616
Author(s):  
Dae Jin Yang ◽  
Seong Je Cho ◽  
Jong Oh Kim ◽  
Won Youl Choi
Keyword(s):  
Lead Zirconate Titanate ◽  
Perovskite Phase ◽  
Fatigue Behavior ◽  
Ferroelectric Properties ◽  
Pyrochlore Phase ◽  
Reactive Sputtering ◽  
Lead Zirconate ◽  
Fatigue Properties ◽  
Pzt Thin Films ◽  
Pzt Films

Lead zirconate titanate (Pb(Zr0.48Ti0.52)O3 or PZT) films were grown on platinized silicon wafers (Pt/SiO2/Si) by d.c. reactive sputtering method with multi targets. The Pb content of PZT films has been widely recognized as affecting not only the phase formation and microstructure but also the dielectric and ferroelectric properties. Pb content of PZT films was controlled by the variation of Pb target current. The relation between Pb content and Pb target current was expressed as y=0.89x-11.09. The x and y are Pb target current and Pb content, respectively. The pyrochlore phase was transformed to perovskite phase as Pb content was increased. This phase transformation improved the ferroelectric properties of PZT films. In PZT films with perovskite phase, fatigue properties were not improved with excess Pb content. Fatigue properties of PZT films began to be fatigued after 106 switching cycles and coincided with the typical PZT fatigue behavior. Excess Pb content (Pb vacancy) did not affect the fatigue properties of PZT films.

Sign in / Sign up

Export Citation Format

Share Document