Effects of Microstructure on Fracture Behavior of Hardened Cement Paste

1994 ◽  
Vol 370 ◽  
Author(s):  
Asif Ahmed ◽  
Leslie Struble
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Cement Paste ◽  
Fracture Behavior ◽  
Curing Temperature ◽  
Hardened Cement ◽  
Curing Time ◽  
Hardened Cement Paste ◽  
Fracture Parameters ◽  
Initial Hypothesis

AbstractMechanical properties of any material, including hardened cement paste, are assumed to be controlled by its microstructure. An attempt has been made here to establish a link between bulk fracture parameters of hardened cement paste and its microstructure. Paste microstructure has been varied by changing the initial w/c ratio, curing time and curing temperature, and by addition of chemicals to change the calcium hydroxide morphology. It has been found that, like compressive strength, fracture parameters depend directly on porosity. Contrary to our initial hypothesis, CH morphology was found to have no effect on the fracture parameters.

scholarly journals Effect of Ground Slag on Mechanical Properties of Concrete under Low Temperature

2021 ◽  
Vol 2109 (1) ◽  
pp. 012019
Author(s):  
Xuelian Yuan ◽  
Jie Hu
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Low Temperature ◽  
Cement Paste ◽  
High Volume ◽  
Hardened Cement ◽  
Micro Structure ◽  
Hardened Cement Paste ◽  
Fracture Properties

Abstract Through using cube resisting compression test, fracture properties and micro-structure, the mechanical properties of high volume ground slag concrete under low temperature are studied in this paper. The results show that low temperature can improve the compressive strength of high volume ground slag concrete. And strength increased with the decreased of temperature. Low temperature can also improve the fracture energy and fracture toughness. Not only can ground slag reduce the content of calcium hydroxide in hardened cement paste, but ground slag can improve the compactness of hardened cement paste, reduce porosity and improve the strength of the interface.

The Influence of Pore-Strucrure on the Campressive Strength of Hardened Cement Paste

1984 ◽  
Vol 42 ◽  
Author(s):  
Huang Yiun-Yuan ◽  
Ding Wei ◽  
Lu Ping
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Pore Structure ◽  
Cement Paste ◽  
Total Porosity ◽  
Hardened Cement ◽  
Hardened Cement Paste ◽  
New Information ◽  
The Relationship ◽  
Empirical Constants

AbstractThe pore-structure strongly influences the carpressive strength of hardened cement paste (hcp) and other porous materials, as well as other mechanical properties. The simplest but most currently used expression representing the relationship between the pore-structure and compressive strength is fram Balshin: σ = σ0 (l-P)A, in which only the total porosity P is involved as a single parameter and σ0 and A are empirical constants. The influence of pore size distribution and pore shapes etc. are not considered.The authors introduce second parameter w - the factor of relative specific surface area of the pores other than the total porosity P into consideration and a new expression is proposed:σc=K11-p/1+2p(K2(1-p))K3w+K4 all the constants K1 - K4 can be determined experimentally. By using of this expression the new information relating the influence of pore-structure on the caopressive strength of hcp can be predicted.

Mechanical Properties of Alite-Calcium Barium Sulphoaluminate Cement Concrete

2008 ◽  
Vol 400-402 ◽  
pp. 121-124
Author(s):  
Zong Hui Zhou ◽  
Ling Chao Lu ◽  
Xing Kai Gao ◽  
Xin Cheng
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Portland Cement ◽  
Cement Paste ◽  
Early Age ◽  
Hardened Cement ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Hardened Cement Paste ◽  
Sulphoaluminate Cement

In this paper, preparation and mechanical properties of Alite-calcium barium sulphoaluminate (Alite-C2.75B1.25A3 ) cement concrete were studied. The results showed the compressive strength of Alite-C2.75B1.25A3 cement concrete was much higher than that of Portland cement concrete, especially the early-age compressive strength. The 24-hour compressive strength of Alite-C2.75B1.25A3 cement concrete could reach 22.81Mpa for w/c=0.45, 17.29Mpa for w/c=0.50 and 17.04Mpa for w/c=0.55 respectively. They were about 50 to 65 percent higher than those of Portland cement concrete. The 7-day compressive strength could reach about 80 to 90 percent of 28-day strength for Alite-C2.75B1.25A3 cement concrete. The 28-day strength could reach 55.85Mpa for w/c=0.45, 48.01Mpa for w/c=0.50 and 44.21Mpa for w/c=0.55 respectively. The results of SEM showed the interfaces between the hardened cement paste and aggregates in Alite-C2.75B1.25A3 cement concrete were more compact than those in Portland cement concrete. Distribution of particulate bulk was more uniformity and a majority of clinker particles was wrapped by hydrated gel in Alite-C2.75B1.25A3 concrete. And, the structure of Alite-C2.75B1.25A3 cement concrete was much more compact than that of Portland cement concrete.

Research on the Mechanical Properties and Micro-Morphology of the Cement Stabilized Gravel with Rubber Particles

2013 ◽  
Vol 470 ◽  
pp. 827-831 ◽  
Author(s):  
Ruo Chong Yang ◽  
Kai Li ◽  
Ji Peng Zhu ◽  
Teng Kuo Zhu ◽  
Hong Lei Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Cement Paste ◽  
Static Pressure ◽  
Volume Fraction ◽  
Hardened Cement ◽  
Hardened Cement Paste ◽  
Pressure Method ◽  
Rubber Particles ◽  
Micro Morphology

The primary objective of this paper was to study the mechanical properties of the cement stabilized gravel by different compact method which added rubber particles by using macroscopic and microscopic test. Through test of compression, relationships of mechanical properties of samples were studied. Pore structure and fractal characteristic of mixture was analyzed quantitatively using mercury intrusion porosimetry (MIP), scanning electron microscope (SEM) was applied to analyze the micro-morphology of samples. The tests results showed that the compressive strength of samples which prepared by using vibrating method was greater than that by static pressure method. Compressive strength of samples from vibrating method or static pressure method decreased with the rubber particles volume fraction increase. MIP tests showed that the mean pore diameter and porosity of mixture increased from about 70nm to 250nm and 9% to 24% with the rubber particles content increasing, respectively. SEM tests showed that the interface bonding between sand and hardened cement paste was better than that of between rubber particles and hardened cement paste.

Influences of Latex and Mixing Procedure on Mechanical Properties of Hardened Cement Paste(II)

2015 ◽  
Vol 1129 ◽  
pp. 538-545
Author(s):  
D. Han ◽  
W. Chen ◽  
S. Zhong
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Flexural Strength ◽  
Fracture Energy ◽  
Cement Paste ◽  
Apparent Density ◽  
Hardened Cement ◽  
Hardened Cement Paste

In this study,influences of latex and mixing procedure on flexural strength, compressive strength, elastic modulus and apparent fracture energy of hardened cement paste mixed with polycarboxylate (PC) as superplasticizer were analyzed. The results show that, the apparent density of fresh latex modified cement paste (LMCP) and the compressive strength of the hardened LMCP were reduced 1%-8% and 0-28% respectively compared with the control, while the flexural strength and apparent fracture energy were increased 11%-70% and 22%-157% respectively. In generally, the mixing procedure had gentle effect on the mechanical properties of harden LMCP with the same mp/mc, while the different mp/mc and latex types had greater impact. The amounts of polymer adsorbed changed by mixing procedure and had significantly effect on the properties fresh LMCP while very little on the harden LMCP.

Effect of Naphthalene Based Superplasticizers on Performance of Ultrafine White Cement

2011 ◽  
Vol 250-253 ◽  
pp. 182-187 ◽  
Author(s):  
Wei Juan Guo ◽  
Gao Xiang Du ◽  
Qiang Xue ◽  
Jing Hui Liao
Keyword(s):  
Compressive Strength ◽  
Cement Paste ◽  
Hardened Cement ◽  
Hardened Cement Paste ◽  
White Cement

The compressive strength of ultrafine white cement samples at three ages: 3, 7 and 28 days and micro appearance of hydrates were tested. The influence of the usage of superplasticizers on the compressive strength of ultrafine white cement paste and hydrates were investigated. The results indicated that the 28d compressive strength of ultrafine white cement with 3% naphthalene based superplasticizers added was 92.9 MPa, 22.9% of that of pure ultrafine white cements (75.6 MPa). The addition of superplasticizers was beneficial to the density of white cement paste. A large number of hydrates (AFt, C-H-S, and so on) were generated in the capillary pores, which would improve the structure of capillary pores of hardened cement paste, increase the density and strength.

Sign in / Sign up

Export Citation Format

Share Document