Experimental Study on Mechanical Properties of Repair Materials for Underwater Rapid Construction

Several strength grades of sulphoaluminate cement concrete were designed, and the mechanical properties with different mix ratios were studied. This paper mainly analyzes the mechanical properties of sulphoaluminate cement concrete with the setting time test, compressive strength test and flexural test. The test results show that the setting time of cement concrete can be controlled by mixing different admixtures. One hand, the initial setting time increases from 34 min to 340 min, and the final setting time increases from 57 min to 580 min when the incorporated borax content changes from 0 to 1.0 %. Other hand, the initial setting time decreased from 34 min to 11 min, and the final setting time increased from 57 min to 18 min, when the incorporated borax content changed from 0 to 0.5 %. Furthermore, the compressive strength can reach 40 MPa, and the flexural strength can reach more than 2.5MPa after 6 hours of curing. The experiment results illustrate that the setting time and the mechanical properties satisfy the needs of the rapid construction requirements under normal temperature conditions.

Study on Mechanical and Shrinkage Properties of High Belite Sulphoaluminate Cement-Based Green Recycled Aggregate Concrete

Green recycled aggregate concrete (RAC) with high strength and low shrinkage is prepared based on recycled coarse aggregate produced by the particle-shaping and aggregate-strengthening method and green low-carbon new cement. This not only effectively alleviates the shortage of natural resources, but also improves the performance of recycled aggregate concrete, which is of great significance for multi-channel resource utilization of construction waste. In this study, three kinds of recycled coarse aggregates (RCA), including simple crushing recycled coarse aggregate (JD-RCA), one-time particle-shaping recycled coarse aggregate (KL-RCA) and two-time particle-shaping recycled coarse aggregate (EKL-RCA), were prepared from the preparation technology of recycled aggregate, and high belite sulphoaluminate cement with excellent performance was used. The effects of aggregate quality, aggregate replacement ratio, and cementitious material content on mechanical properties and shrinkage properties of green recycled aggregate concrete were studied in comparison with ordinary Portland cement-based recycled aggregate concrete. The testing results show that the particle-shaping method can effectively improve the aggregate quality. The compressive strength and dry shrinkage performance of recycled aggregate concrete made of particle-shaped aggregate are only a little different from those of natural aggregate concrete, and even the performance of recycled aggregate is better than that of natural aggregate concrete under the condition of a low replacement ratio of recycled aggregate. In addition, high belite sulphoaluminate cement-based recycled aggregate concrete (HBRAC) not only has early strength and rapid hardening, but also has excellent drying shrinkage resistance, and its shrinkage rate can be reduced to more than 75% compared with ordinary Portland cement-based recycled aggregate concrete (OPRAC).