Electron and Photon Irradiation Effects in Metal/Amorphous Chalcogenide Bilayers

1994 ◽  
Vol 337 ◽  
Author(s):  
Andreas Ploessl ◽  
B.J. Dhanjal ◽  
A.G. Fitzgerald ◽  
R.A.G. Gibson ◽  
A.D. Gillies
Keyword(s):  
Electron Beam ◽  
Ultraviolet Light ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
X Ray ◽  
Photon Irradiation ◽  
Amorphous Chalcogenides ◽  
Potential Benefits ◽  
Electron And Photon ◽  
Better Than

ABSTRACTThin film bilayers of metal and amorphous chalcogenides have been prepared by evaporation. The metals were silver and zinc, while the chalcogenides were P2Se3 and arsenic sulphides, mainly As2S3. The metals dissolved into the chalcogenide films when illuminated with ultraviolet light or when irradiated with an electron beam. The changes in composition and chemical bonding which were caused by this irradiation, were investigated by x-ray photoelectron spectroscopy. The concomitant structural changes have been investigated by electron diffraction.After the metal and chalcogenide had intermixed, either due to photon or electron irradiation, the layers became sensitive to an electron beam; this sensitivity depended on the composition of the chalcogenide. Energy-dispersive x-ray microanalysis showed that the electron beam rapidly, but reversibly, depleted the irradiated areas of the dissolved metal. Very fine patterns, of better than half-micron resolution, could be written. By exposing a pure arsenic sulphide film through a shadow mask to ultraviolet light, zinc could be deposited selectively to form fine patterns. Plasma processing developed either kind of pattern reliably, thus rendering the material a dry inorganic resist for photo- and electron-beam-lithography with potential benefits in particular for GaAs.

scholarly journals Pore Modification and Phosphorus Doping Effect on Phosphoric Acid-Activated Fe-N-C for Alkaline Oxygen Reduction Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1519
Author(s):  
Jong Gyeong Kim ◽  
Sunghoon Han ◽  
Chanho Pak
Keyword(s):  
Phosphoric Acid ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Electronic States ◽  
Nitrogen Adsorption ◽  
Reduction Reaction ◽  
Phosphorus Doping ◽  
X Ray ◽  
Precious Metal Catalysts ◽  
Adsorption Desorption

The price and scarcity of platinum has driven up the demand for non-precious metal catalysts such as Fe-N-C. In this study, the effects of phosphoric acid (PA) activation and phosphorus doping were investigated using Fe-N-C catalysts prepared using SBA-15 as a sacrificial template. The physical and structural changes caused by the addition of PA were analyzed by nitrogen adsorption/desorption and X-ray diffraction. Analysis of the electronic states of Fe, N, and P were conducted by X-ray photoelectron spectroscopy. The amount and size of micropores varied depending on the PA content, with changes in pore structure observed using 0.066 g of PA. The electronic states of Fe and N did not change significantly after treatment with PA, and P was mainly found in states bonded to oxygen or carbon. When 0.135 g of PA was introduced per 1 g of silica, a catalytic activity which was increased slightly by 10 mV at −3 mA/cm2 was observed. A change in Fe-N-C stability was also observed through the introduction of PA.

scholarly journals Green Synthesis of Feather-Shaped MoS2/CdS Photocatalyst for Effective Hydrogen Production

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Yang Liu ◽  
Hongtao Yu ◽  
Xie Quan ◽  
Shuo Chen
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Production ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Sulfur Source ◽  
X Ray ◽  
Transmission Electron ◽  
Microscopy Images ◽  
Effective Hydrogen ◽  
Better Than

MoS2/CdS photocatalyst was fabricated by a hydrothermal method for H2production under visible light. This method used low toxic thiourea as a sulfur source and was carried out at 200°C. Thus, it was better than the traditional methods, which are based on an annealing process at relatively high temperature (above 400°C) using toxic H2S as reducing agent. Scanning electron microscopy and transmission electron microscopy images showed that the morphologies of MoS2/CdS samples were feather shaped and MoS2layer was on the surface of CdS. The X-ray photoelectron spectroscopy testified that the sample was composed of stoichiometric MoS2and CdS. The UV-vis diffuse reflectance spectra displayed that the loading of MoS2can enhance the optical absorption of MoS2/CdS. The photocatalytic activity of MoS2/CdS was evaluated by producing hydrogen. The hydrogen production rate on MoS2/CdS reached 192 μmol·h−1. This performance was stable during three repeated photocatalytic processes.

Comparative Study of Time-Dependent PAES and XPS on a Ni/Pd Surface

2017 ◽  
Vol 373 ◽  
pp. 313-316 ◽  
Author(s):  
Samantha Zimnik ◽  
Christian Piochacz ◽  
Sebastian Vohburger ◽  
Christoph Hugenschmidt
Keyword(s):  
Photoelectron Spectroscopy ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Structural Changes ◽  
Time Dependent ◽  
Xps Analysis ◽  
Time Constants ◽  
X Ray ◽  
Residual Gas ◽  
Rule Out

We report on time-dependent Positron annihilation induced Auger Electron Spectroscopy (PAES) study on 0.5 monolayers (ML) Ni on polycrystalline Pd accompanied by complementary X-ray induced Photoelectron Spectroscopy (XPS). The normalized PAES spectra showed a significant decrease in the Ni intensity and an increase in the Pd intensity as a function of time. To rule out varying influence on the elements e.g. from surface contaminates due to the residual gas, a time-dependent XPS analysis was performed on pure Ni and Pd as well as to analyze the main contaminants C and O. The O fraction was found to be constant within the measurement time and the time constants for C significantly differ from those of Ni and Pd in the PAES data. Consequently, it was concluded that the PAES data show a superposition of C contamination and structural changes at the surface of Ni/Pd.

Deposition of Cobalt Doped Zinc Oxide Thin Film Nano-Composites Via Pulsed Electron Beam Ablation

MRS Advances ◽  
2016 ◽  
Vol 1 (6) ◽  
pp. 433-439 ◽  
Author(s):  
Asghar Ali ◽  
Patrick Morrow ◽  
Redhouane Henda ◽  
Ragnar Fagerberg
Keyword(s):  
Zinc Oxide ◽  
Electron Beam ◽  
Binding Energy ◽  
Photoelectron Spectroscopy ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
Oxide Thin Film ◽  
X Ray ◽  
Pulsed Electron Beam ◽  
Deposited Films

AbstractThis study reports on the preparation of cobalt doped zinc oxide (Co:ZnO) films via pulsed electron beam ablation (PEBA) from a single target containing 20 w% Co on sapphire (0001) and silicon (100) substrates. The films have been deposited at various temperatures (350оC, 400оC, 450оC) and pulse frequencies (2 Hz, 4 Hz), under a background argon (Ar) pressure of about 3 mtorr, and an accelerating voltage of 14 kV. The surface morphology has been examined by atomic force microscopy (AFM) and scanning electron microscopy (SEM). According to SEM analysis, the films consist of nano-globules whose size is in the range of 80-178 nm. Energy dispersive x-ray spectroscopy (EDX) reveals that deposition is congruent and the prepared films contain ∼20±5 w% cobalt. It has been found that the nano-globules in the deposited films are cobalt-rich zones containing ∼70 w% Co. From x-ray photoelectron spectroscopy (XPS) analysis, Co 2p3/2 peaks indicate that the deposited films contain CoO (binding energy = 780.5 eV) as well as metallic Co (binding energy = 778.1-778.5 eV). X-ray diffraction (XRD) analysis supports the presence of metallic Co hcp phase (2ϴ = 44.47° and 47.43°) in the films.

scholarly journals Copper Containing Glass-Based Bone Adhesives for Orthopaedic Applications: Glass Characterization and Advanced Mechanical Evaluation

2020 ◽  
Author(s):  
Sahar. Mokhtari ◽  
Anthony.W. Wren
Keyword(s):  
Mechanical Properties ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Viscoelastic Behavior ◽  
Polymer Chains ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compression Data

AbstractThis study addresses issues with currently used bone adhesives, by producing novel glass based skeletal adhesives through modification of the base glass composition to include copper (Cu) and by characterizing each glass with respect to structural changes. Bioactive glasses have found applications in fields such as orthopedics and dentistry, where they have been utilized for the restoration of bone and teeth. The present work outlines the formation of flexible organic-inorganic polyacrylic acid (PAA) – glass hybrids, commercial forms are known as glass ionomer cements (GICs). Initial stages of this research will involve characterization of the Cu-glasses, significant to evaluate the properties of the resulting adhesives. Scanning electron microscopy (SEM) of annealed Cu glasses indicates the presence of partial crystallization in the glass. The structural analysis of the glass using Raman suggests the formation of CuO nanocrystals on the surface. X-ray diffraction (XRD) pattern and X-ray photoelectron spectroscopy (XPS) further confirmed the formation of crystalline CuO phases on the surface of the annealed Cu-glass. The setting reaction was studied using Fourier transform infrared spectroscopy (ATR-FTIR). The mechanical properties of the Cu containing adhesives exhibited gel viscoelastic behavior and enhanced mechanical properties when compared to the control composition. Compression data indicated the Cu glass adhesives were efficient at energy dissipation due to the reversible interactions between CuO nano particles and PAA polymer chains.

scholarly journals Preparation of pod-shaped TiO 2 and Ag@TiO 2 nano burst tubes and their photocatalytic activity

2019 ◽  
Vol 6 (9) ◽  
pp. 191019 ◽  
Author(s):  
Shang Wang ◽  
Zhaolian Han ◽  
Tingting Di ◽  
Rui Li ◽  
Siyuan Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Oxalic Acid ◽  
Ultraviolet Light ◽  
Photoelectron Spectroscopy ◽  
Degradation Process ◽  
Catalytic Performance ◽  
Tetrabutyl Titanate ◽  
Order Kinetic ◽  
X Ray

The pod-shaped TiO 2 nano burst tubes (TiO 2 NBTs) were prepared by the combination of electrospinning and impregnation calcination with oxalic acid (H 2 C 2 O 4 ), polystyrene (PS) and tetrabutyl titanate. The silver nanoparticles (AgNPs) were loaded onto the surface of TiO 2 NBTs by ultraviolet light reduction method to prepare pod-shaped Ag@TiO 2 NBTs. In this work, we analysed the effect of the amount of oxalic acid on the cracking degree of TiO 2 NBTs; the effect of the concentration of AgNO 3 solution on the particle size and loading of AgNPs on the surface of TiO 2 NBTs. Scanning electron microscopy and transmission electron microscopy investigated the surface morphology of samples. X-ray diffraction and X-ray photoelectron spectroscopy characterized the structure and composition of samples. Rhodamine B (RhB) solution was used to evaluate the photocatalytic activity of pod-shaped TiO 2 NBTs and Ag@TiO 2 NBTs. The results showed that TiO 2 NBTs degraded 91.0% of RhB under ultraviolet light, Ag@TiO 2 NBTs degraded 95.5% under visible light for 75 and 60 min, respectively. The degradation process of both samples was consistent with the Langmuir–Hinshelwood first-order kinetic equation. Therefore, the catalytic performance of the sample is: Ag@TiO 2 NBTs > TiO 2 NBTs > TiO 2 nanotubes.

Structural Changes on Photochromism of Organic-Inorganic Hybrid Materials

1999 ◽  
Vol 604 ◽  
Author(s):  
Keiichi Kuboyama ◽  
Kazumi Matsushige
Keyword(s):  
Fourier Transform ◽  
Tungsten Oxide ◽  
Transition Metal Oxides ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Spectroscopic Measurement ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Oxide Hydrate ◽  
Ft Ir

AbstractSome transition metal oxides are known to exhibit the reversible coloration phenomena. Tungsten oxide is one of such materials and exhibits the photochromism and the electrochromism. It is known that the coloration phenomena in the tungsten oxide hydrate are caused by the redox reaction. We found that the photochromic efficiency became extremely higher by addition of some organic materials to the tungsten oxide hydrate and we have studied the mechanism of such a remarkable photochromic enhancement. In some spectroscopic measurement as FT-IR (Fourier transform infrared spectroscopy) and XPS (X-ray photoelectron spectroscopy), we obtained interesting features as follows. The addition of an organic material leads to reducing the tungsten oxide hydrate to smaller pieces, that is, the surface area of the pieces that can react with the additive increases. Moreover, it was found that specific sites in the additive are oxidized when the sample colors. The fact suggests that the additives having such specific sites can enhance the photochromism of the tungsten oxide hydrate

scholarly journals Enhanced Electrochemical Performances of Cobalt-Doped Li2MoO3 Cathode Materials

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 843 ◽  
Author(s):  
Zhiyong Yu ◽  
Jishen Hao ◽  
Wenji Li ◽  
Hanxing Liu
Keyword(s):  
Cathode Materials ◽  
Photoelectron Spectroscopy ◽  
Solid Phase ◽  
Phase Method ◽  
Electrochemical Performances ◽  
X Ray ◽  
Electrochemical Tests ◽  
Co Doping ◽  
Solid Phase Method ◽  
Better Than

Co-doped Li2MoO3 was successfully synthesized via a solid phase method. The impacts of Co-doping on Li2MoO3 have been analyzed by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) measurements. The results show that an appropriate amount of Co ions can be introduced into the Li2MoO3 lattices, and they can reduce the particle sizes of the cathode materials. Electrochemical tests reveal that Co-doping can significantly improve the electrochemical performances of the Li2MoO3 materials. Li2Mo0.90Co0.10O3 presents a first-discharge capacity of 220 mAh·g−1, with a capacity retention of 63.6% after 50 cycles at 5 mA·g−1, which is much better than the pristine samples (181 mAh·g−1, 47.5%). The enhanced electrochemical performances could be due to the enhancement of the structural stability, and the reduction in impedance, due to the Co-doping.

Effect of Phosphorus on the Friction and Wear Characteristics of Cu-Sn-P Alloys

1979 ◽  
Vol 101 (2) ◽  
pp. 201-206 ◽  
Author(s):  
Y. Taga ◽  
K. Nakajima
Keyword(s):  
Photoelectron Spectroscopy ◽  
Friction And Wear ◽  
Structural Changes ◽  
Surface Concentration ◽  
Wear Characteristics ◽  
X Ray ◽  
The Matrix ◽  
Pin On Disc ◽  
The Coefficient Of Friction ◽  
Friction And Wear Characteristics

The effects of phosphorus on the friction and wear characteristics of Cu-5 at. percent Sn-P alloys containing 1–5 at. percent P were studied using a pin on disc apparatus. The results showed that the decrease in both the coefficient of friction and the rate of wear became conspicuous with the increase in quantity of Cu3P coexisting in the matrix; its amount increases with the content of phosphorus. The structural changes in the surface of the specimen due to heating in a vacuum were observed by using Auger electron spectroscopy and X-ray photoelectron spectroscopy. It was seen that the surface concentration of phosphorus strongly increased after heating at 573K, whereas the diffusion of tin atoms was markedly retarded. It was concluded from these results that the behavior of phosphorus atoms in the surface during sliding played an important role in the friction and wear characteristics of Cu-Sn-P alloys.

Sign in / Sign up

Export Citation Format

Share Document