Improvement of film Quality of A-Si:H Deposited by Photo-CVD using SiH2Cl2

1994 ◽  
Vol 336 ◽  
Author(s):  
T. Oshima ◽  
K. Yamaguchi ◽  
A. Yamada ◽  
M. Konagai ◽  
K. Takahashi
Keyword(s):  
Optical Properties ◽  
Amorphous Silicon ◽  
Defect Density ◽  
Hydrogenated Amorphous Silicon ◽  
Small Addition ◽  
Gas Mixture ◽  
Film Properties ◽  
Electrical And Optical Properties ◽  
Hydrogenated Amorphous

ABSTRACTHydrogenated Amorphous silicon films (a-Si:H) were prepared by mercury sensitized photo-CVD using SiH4 and SiH2Cl2 gas mixture. The effects of chlorine (Cl) on the electrical, optical and structural properties of the a-Si:H films were investigated. It was found that a small addition of SiH2Cl2 to the deposition system increases the photo-sensitivity, decreases the defect density, and reduces the light induced degradation of a-Si:H films. At a large addition of SiH2Cl2, however, the CI incorporation into the films was observed, resulting in the deterioration of the film properties. The electrical and optical properties were successfully improved by the H2 dilution when the films were deposited with a large addition of SiH2Cl2.

On the effects of thermal treatment on the composition, structure, morphology, and optical properties of hydrogenated amorphous silicon-oxycarbide

2009 ◽  
Vol 24 (8) ◽  
pp. 2561-2573 ◽  
Author(s):  
Spyros Gallis ◽  
Vasileios Nikas ◽  
Eric Eisenbraun ◽  
Mengbing Huang ◽  
Alain E. Kaloyeros
Keyword(s):  
Optical Properties ◽  
Thermal Treatment ◽  
Amorphous Silicon ◽  
Hydrogenated Amorphous Silicon ◽  
Effective Cross Section ◽  
Silicon Oxycarbide ◽  
Nuclear Reaction Analysis ◽  
Structure Morphology ◽  
Composition Structure ◽  
Hydrogenated Amorphous

The composition, structure, morphology, and optical characteristics of hydrogenated amorphous silicon-oxycarbide (a-SiCxOyHz) materials were investigated as a function of experimental processing conditions and post-deposition thermal treatment. Thermal chemical vapor deposition (TCVD) was applied to the growth of three different types of a-SiCxOyHz films, namely, SiC-like (SiC1.08O0.07H0.21), Si-C-O (SiC0.50O1.20H0.22), and SiO2-like (SiC0.20O1.70H0.24). The resulting films were subsequently annealed at temperatures ranging from 500 °C to 1100 °C for 1 h in an argon atmosphere. The composition, structure, and morphology of as-deposited and post-annealed films were characterized by Fourier transform infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectroscopy (RBS), nuclear-reaction analysis (NRA), and scanning electron microscopy. Corresponding optical properties were assessed by spectroscopic ultraviolet-visible ellipsometry (UV-VIS-SE). These studies led to the identification of an optimized process window for the growth of Er doped silicon oxycarbide (SiC0.5O1.0:Er) thin film with strong room-temperature photoluminescence emission measured around 1540 nm within a broad (460 nm to 600 nm) wavelength band. Associated modeling studies showed that the effective cross section for Er excitation in the SiC0.5O1.0:Er matrix was approximately four orders of magnitude larger than its analog for direct optical excitation of Er ions.

Effect of Nitrogen Doping on the Structure and Optical Properties of N-Type Hydrogenated Amorphous Silicon Thin Films

2011 ◽  
Vol 383-390 ◽  
pp. 6980-6985
Author(s):  
Mao Yang Wu ◽  
Wei Li ◽  
Jun Wei Fu ◽  
Yi Jiao Qiu ◽  
Ya Dong Jiang
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Amorphous Silicon ◽  
Photoelectron Spectroscopy ◽  
Gas Flow ◽  
Hydrogenated Amorphous Silicon ◽  
Chemical Vapor ◽  
Silicon Thin Films ◽  
Frequency Plasma ◽  
Hydrogenated Amorphous

Hydrogenated amorphous silicon (a-Si:H) thin films doped with both Phosphor and Nitrogen are deposited by ratio frequency plasma enhanced chemical vapor deposition (PECVD). The effect of gas flow rate of ammonia (FrNH3) on the composition, microstructure and optical properties of the films has been investigated by X-ray photoelectron spectroscopy, Raman spectroscopy and ellipsometric spectra, respectively. The results show that with the increase of FrNH3, Si-N bonds appear while the short-range order deteriorate in the films. Besides, the optical properties of N-doped n-type a-Si:H thin films can be easily controlled in a PECVD system.

scholarly journals Numerical Design of Ultrathin Hydrogenated Amorphous Silicon-Based Solar Cell

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
F. X. Abomo Abega ◽  
A. Teyou Ngoupo ◽  
J. M. B. Ndjaka
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Amorphous Silicon ◽  
Buffer Layer ◽  
Defect Density ◽  
Hydrogenated Amorphous Silicon ◽  
Theoretical Work ◽  
Silicon Based ◽  
The Impact ◽  
Hydrogenated Amorphous

Numerical modelling is used to confirm experimental and theoretical work. The aim of this work is to present how to simulate ultrathin hydrogenated amorphous silicon- (a-Si:H-) based solar cells with a ITO BRL in their architectures. The results obtained in this study come from SCAPS-1D software. In the first step, the comparison between the J-V characteristics of simulation and experiment of the ultrathin a-Si:H-based solar cell is in agreement. Secondly, to explore the impact of certain properties of the solar cell, investigations focus on the study of the influence of the intrinsic layer and the buffer layer/absorber interface on the electrical parameters ( J SC , V OC , FF, and η ). The increase of the intrinsic layer thickness improves performance, while the bulk defect density of the intrinsic layer and the surface defect density of the buffer layer/ i -(a-Si:H) interface, respectively, in the ranges [109 cm-3, 1015 cm-3] and [1010 cm-2, 5 × 10 13  cm-2], do not affect the performance of the ultrathin a-Si:H-based solar cell. Analysis also shows that with approximately 1 μm thickness of the intrinsic layer, the optimum conversion efficiency is 12.71% ( J SC = 18.95   mA · c m − 2 , V OC = 0.973   V , and FF = 68.95 % ). This work presents a contribution to improving the performance of a-Si-based solar cells.

Reduction of the Defect Density in a-Si:H Deposited at ≤250°C

1993 ◽  
Vol 297 ◽  
Author(s):  
Hitoshi Nishio ◽  
Gautam Ganguly ◽  
Akihisa Matsuda
Keyword(s):  
Diffusion Coefficient ◽  
Amorphous Silicon ◽  
Surface Diffusion ◽  
Film Growth ◽  
Defect Density ◽  
Hydrogenated Amorphous Silicon ◽  
Device Fabrication ◽  
Surface Diffusion Coefficient ◽  
Hydrogenated Amorphous ◽  
Substrate Temperatures

We present a method to reduce the defect density in hydrogenated amorphous silicon (a-Si:H) deposited at low substrate temperatures similar to those used for device fabrication . Film-growth precursors are energized by a heated mesh to enhance their surface diffusion coefficient and this enables them to saturate more surface dangling bonds.

Improved Light Soaking Stability of R.F. Sputter Deposited Amorphous Silicon

1991 ◽  
Vol 219 ◽  
Author(s):  
A. Wynveen ◽  
J. Fan ◽  
J. Kakalios ◽  
J. Shinar
Keyword(s):  
Amorphous Silicon ◽  
Hydrogen Content ◽  
Defect Density ◽  
Hydrogenated Amorphous Silicon ◽  
Dark Conductivity ◽  
Initial Defect ◽  
Optical Gap ◽  
Sputter Deposited ◽  
Staebler Wronski Effect ◽  
Hydrogenated Amorphous

ABSTRACTStudies of r.f. sputter deposited hydrogenated amorphous silicon (a-Si:H) find that the light induced decrease in the dark conductivity and photoconductivity (the Staebler-Wronski effect) is reduced when the r.f. power used during deposition is increased. The slower Staebler-Wronski effect is not due to an increase in the initial defect density in the high r.f. power samples, but may result from either the lower hydrogen content or the smaller optical gap found in these films.

Sign in / Sign up

Export Citation Format

Share Document