Reaction Kinetics of Epitaxial Silicon Deposition at 220-400°C Using Remote Plasma-Enhanced Chemical Vapor Deposition

1989 ◽  
Vol 165 ◽  
Author(s):  
B. Anthony ◽  
T. Hsu ◽  
L. Breaux ◽  
S. Banerjee ◽  
A. Tasch

AbstractIn this paper the reaction kinetics of Remote Plasma-enhanced Chemical Vapor Deposition (RPCVD) are investigated. Growth rate characterization has been performed for substrate temperatures of 220 – 400°C, r-f powers from 4 – 8 W, and silane flow rates of 10 – 30 sccm. Growth rate has been found to increase exponentially with r-f power, which is, as yet, unexplained. An approximate square root dependence of growth rate on silane partial pressure agrees with the theory of Claasen et. Al for Chemical Vapor Deposition (CVD) of silicon from silane with an inert carrier gas. From an Arrhenius plot of the temperature dependence of growth rate, we note a change of slope at ∼300°C which we have attributed to the behavior of hydrogen at the silicon surface.

1989 ◽  
Vol 165 ◽  
Author(s):  
T. Hsu ◽  
B. Anthony ◽  
L. Breaux ◽  
S. Banerjee ◽  
A. Tasch

AbstractLow temperature processing will be an essential requirement for the device sizes, structures, and materials being considered for future integrated circuit applications. In particular, low temperature silicon epitaxy will be required for new devices and technologies utilizing three-dimensional epitaxial structures and silicon-based heterostructures. A novel technique, Remote Plasma-enhanced Chemical Vapor Deposition (RPCVD), has achieved epitaxial silicon films at a temperature as low as 150°C which is believed to be the lowest temperature to date for silicon epitaxy. The process relies on a stringent ex-situ preparation procedure, a controlled wafer loading sequence, and an in-situ remote hydrogen plasma clean of the sample surface, all of which provide a surface free of carbon, oxygen, and other contaminants. The system is constructed using ultra-high vacuum technology (10-10 Torr) to achieve and maintain contaminantion-free surfaces and films. Plasma excitation of argon is used in lieu of thermal energy to provide energetic species that dissociate silane and affect surface chemical processes. Excellent crystallinity is observed from the thin films grown at 150°C using the analytical techniques of Transmission Electron Microscopy (TEM) and Nomarski interference contrast microscopy after defect etching.


2006 ◽  
Vol 910 ◽  
Author(s):  
Charles W. Teplin ◽  
Matthew Page ◽  
Eugene Iwaniczko ◽  
Kim M. Jones ◽  
Robert M. Ready ◽  
...  

AbstractWe grow epitaxial silicon films onto (100) silicon wafers from pure silane by hot-wire chemical vapor deposition (HWCVD). The films grow epitaxially for a thickness hepi before a Si:H cones nucleate and expand. We study the dependence of hepi on growth rate and the differences between Ta and W filaments. The surface morphology of thin but completely epitaxial films are studied in order to correlate the surface roughness during growth with the eventual epitaxial breakdown thickness. Surface roughness, strain and H at the wafer/film interface are not likely to cause the observed breakdown.


1990 ◽  
Author(s):  
Brian G. Anthony ◽  
Ting-Chen Hsu ◽  
Louis H. Breaux ◽  
Rong Z. Qian ◽  
Sanjay K. Banerjee ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document