Resonance behavior of metallic glass resonators and their application as sensor platform

2011 ◽  
Vol 1300 ◽  
Author(s):  
K.W. Zhang ◽  
L.L. Fu ◽  
S.Q. Li ◽  
Z.-Y. Cheng
Keyword(s):  
Metallic Glass ◽  
High Sensitivity ◽  
Vibration Modes ◽  
Sensor Surface ◽  
Target Species ◽  
Mechanical Resonators ◽  
Magnetic Bias ◽  
Resonance Behavior ◽  
Merit Factor ◽  
Sensor Platform

Utilizing magnetostrictive effect, the metallic glass is used to form mechanical resonators with different configurations. The resonance behaviors of these resonators are studied under different conditions, including different dc magnetic bias fields and different ac magnetic driving field. It is found that the resonators made of metallic glass exhibit a higher quality merit factor. Based on the results, it is also found that the acoustic wave velocity of the metallic glass decreases with increasing frequency. The application of these resonators as sensor platform is investigated. It is found that both odd and even vibration modes can be detected. Therefore, it provides a unique device that is capable to detect the target species on the sensor surface without “blind point(s)”, which is a challenge for all sensors based on other types of resonators. For the biosensors based on these resonators, a high sensitivity was observed. The advantages of these sensors over the current devices are demonstrated by the detection of Salmonella typhimurium (S. typhimurium) in water.

Magnetostrictive Microcantilever as Micro-Biosensor Platform

2004 ◽  
Vol 855 ◽  
Author(s):  
Suiqiong Li ◽  
Zhimin Li ◽  
Lisa Orona ◽  
Z.-Y. Cheng
Keyword(s):  
Theoretical Calculation ◽  
High Performance ◽  
The State ◽  
Yeast Cells ◽  
Q Value ◽  
Resonance Behavior ◽  
Merit Factor ◽  
Sensor Platform ◽  
State Of Art

ABSTRACTIn this paper, a novel micro-biosensor platform - magnetostrictive microcantilever (MSMC) - is reported. The resonance behavior and the sensitivity of MSMC as sensor platform were characterized and compared to the theoretical calculation. The detection of yeast cells using the biosensor made of MSMC was reported. The results demonstrate the feasibility of MSMC as a high performance biosensor platform. Compare to current microcantilevers, which is widely considered as the state-of-art sensor platform, the MSMCs have following advantages: 1) remote/wireless driving and sensing; 2) easy to fabricate. More importantly, it is experimentally found that the quality merit factor (Q value) of MSMC can reach more than 250, which is much higher than other cantilevers.

Early History and Fundamentals of Optomechanics

2020 ◽  
pp. 1-40
Author(s):  
Antoine Heidmann ◽  
Pierre-Francois Cohadon
Keyword(s):  
Quantum Optics ◽  
Laser Cooling ◽  
Ground State ◽  
High Sensitivity ◽  
Early History ◽  
Optical Measurements ◽  
Mechanical Resonators ◽  
History Of ◽  
Control Light ◽  
Quantum Ground State

In its simplest form, optomechanics amounts to two complementary coupling effects: mechanical motion changes the path followed by light, but light (through radiation pressure) can drive the mechanical resonator into motion as well. Optomechanics allows one to control resonator motion by laser cooling down to the quantum ground state, or to control light by using back-action in optical measurements and in quantum optics. Its main applications are optomechanical sensors to detect tiny mechanical motions and weak forces, cold damping and laser cooling, and quantum optics. The objectives of this chapter are to provide a brief account of the history of the field, together with its fundamentals. We will in particular review both classical and quantum aspects of optomechanics, together with its applications to high-sensitivity measurements and to control or cool mechanical resonators down to their ground state, with possible applications for tests of quantum theory or for quantum information.

scholarly journals Refractive Index Sensing through Surface Plasmon Resonance in Light-Diffusing Fibers

2018 ◽  
Vol 8 (7) ◽  
pp. 1172 ◽  
Author(s):  
Nunzio Cennamo ◽  
Luigi Zeni ◽  
Ester Catalano ◽  
Francesco Arcadio ◽  
Aldo Minardo
Keyword(s):  
Refractive Index ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Optical Fiber Sensor ◽  
Fiber Surface ◽  
High Sensitivity ◽  
Refractive Index Sensing ◽  
Sensor Platform ◽  
Chemical Procedure

In this paper, we show that light-diffusing fibers (LDF) can be efficiently used as host material for surface plasmon resonance (SPR)-based refractive index sensing. This novel platform does not require a chemical procedure to remove the cladding or enhance the evanescent field, which is expected to give better reproducibility of the sensing interface. The SPR sensor has been realized by first removing the cladding with a simple mechanical stripper, and then covering the unclad fiber surface with a thin gold film. The tests have been carried out using water–glycerin mixtures with refractive indices ranging from 1.332 to 1.394. The experimental results reveal a high sensitivity of the SPR wavelength to the outer medium’s refractive index, with values ranging from ~1500 to ~4000 nm/RIU in the analyzed range. The results suggest that the proposed optical fiber sensor platform could be used in biochemical applications.

scholarly journals Quantification of Neuropeptide Y with Picomolar Sensitivity Enabled by Guided-Mode Resonance Biosensors

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 126 ◽  
Author(s):  
Mohammad G. Abdallah ◽  
Joseph A. Buchanan-Vega ◽  
Kyu J. Lee ◽  
Brett R. Wenner ◽  
Jeffery W. Allen ◽  
...  
Keyword(s):  
Neuropeptide Y ◽  
Near Infrared ◽  
Single Point ◽  
High Sensitivity ◽  
Quantitative Detection ◽  
Label Free ◽  
Sensor Surface ◽  
Detection Range ◽  
Guided Mode ◽  
Guided Mode Resonance

Assessing levels of neuropeptide Y (NPY) in the human body has many medical uses. Accordingly, we report the quantitative detection of NPY biomarkers applying guided-mode resonance (GMR) biosensor methodology. The label-free sensor operates in the near-infrared spectral region exhibiting distinctive resonance signatures. The interaction of NPY with bioselective molecules on the sensor surface causes spectral shifts that directly identify the binding event without additional processing. In the experiments described here, NPY antibodies are attached to the sensor surface to impart specificity during operation. For the low concentrations of NPY of interest, we apply a sandwich NPY assay in which the sensor-linked anti-NPY molecule binds with NPY that subsequently binds with anti-NPY to close the sandwich. The sandwich assay achieves a detection limit of ~0.1 pM NPY. The photonic sensor methodology applied here enables expeditious high-throughput data acquisition with high sensitivity and specificity. The entire bioreaction is recorded as a function of time, in contrast to label-based methods with single-point detection. The convenient methodology and results reported are significant, as the NPY detection range of 0.1–10 pM demonstrated is useful in important medical circumstances.

Studies for the Odin sub-millimetre radiometer. II. Retrieval methodology

2002 ◽  
Vol 80 (4) ◽  
pp. 341-356 ◽  
Author(s):  
Ph. Baron ◽  
Ph. Ricaud ◽  
J de la Noë ◽  
J EP Eriksson ◽  
F Merino ◽  
...  
Keyword(s):  
Frequency Band ◽  
Estimation Method ◽  
High Sensitivity ◽  
Optimal Estimation ◽  
Forward Model ◽  
Model Errors ◽  
Target Species ◽  
Spectral Parameters ◽  
Chlorine Monoxide ◽  
Standard Code

This paper presents the first algorithm developed to retrieve atmospheric vertical profiles of trace gases from calibrated spectra measured by the sub-millimetre radiometer (SMR) onboard the Odin satellite. An estimation of atmospheric profiles is obtained by means of an inversion of the spectra using the Optimal Estimation Method. Great attention is paid to the study of the simultaneous retrieval of several species and nonlinearity effects. The measurement response is defined to give the altitude domain of a good retrieval. Main sources of measurement and forward model errors are characterized and separated into two categories: the fixed errors and the variable errors. We define a standard retrieval strategy that can be applied to theoretically investigate any frequency band of any observing Odin mode. For each frequency band, two categories of species are defined: the target species, i.e., the main species to be retrieved, and the interfering species, i.e., molecules emitting an interfering radiance in the observed band. The standard code is based upon an inversion of spectra using a linearized forward model and simultaneously estimates target species and interfering species. As an example, inversions of synthetic noise-free spectra of ozone and chlorine monoxide within an autocorrelator band ranging from 501.18 to 501.58 GHz are shown to behave as expected in the middle stratosphere and in the lower mesosphere. The error analysis shows retrieval limitations in the lower stratosphere that are mainly induced by the high sensitivity of the retrieval to parameters such as tangent height, accuracy in the vertical profile of the interfering species, and spectral parameters of both target lines and interfering lines. PACS Nos.: 42.68Ay, 07.07Df, 07.57Kp

scholarly journals Infrared optical properties of aged porous GaAs

2001 ◽  
Vol 16 (5) ◽  
pp. 1241-1244 ◽  
Author(s):  
S. Zangooie ◽  
M. Schubert ◽  
T. E. Tiwald ◽  
J. A. Woollam
Keyword(s):  
Optical Properties ◽  
High Sensitivity ◽  
Vibration Modes ◽  
Angle Of Incidence ◽  
Long Wavelength ◽  
Volume Porosity ◽  
Aging Properties ◽  
Solid Part ◽  
Porous Gaas ◽  
Infrared Optical Properties

Aging properties of porous GaAs were investigated nondestructively using variable angle of incidence infrared spectroscopic ellipsometry. In addition to the thickness and volume porosity, properties of the solid part of the porous material are investigated in terms of the long-wavelength dielectric function and chemical composition. The high sensitivity is employed to detect and identify infrared resonant absorptions related to different vibration modes of cubic and amorphous As2O3. Resonances centered at 333.3, 480, 785.8, 838, and 1045.5 cm−1 are from cubic As2O3, whereas resonances centered at 350, 490, and 808.5 cm−1 are from amorphous As2O3.

Electroactive Polymer Based Micro-ElectroMechanical System as Biosensor Platform

2004 ◽  
Vol 855 ◽  
Author(s):  
Zhimin Li ◽  
Suiqiong Li ◽  
Z.-Y. Cheng
Keyword(s):  
Liquid Medium ◽  
Electromechanical System ◽  
Electroactive Polymer ◽  
Q Value ◽  
Damping Effect ◽  
Merit Factor ◽  
Sensor Platform ◽  
Resonance Frequencies ◽  
Micro Sensor ◽  
Micro Electromechanical System

ABSTRACTA micro-electromechanical diaphragm (MEMD) as micro-sensor platform is introduced. The performance of a MEMD is compared with that of a microcantilever (MC). It is theoretically found that the sensitivity of a MEMD is about 50 times higher than that of a MC. The measured resonance frequencies in air proved the validity of the MEMD design. More importantly, the quality merit factor (Q value) of MEMD is higher than that of MC. The damping effect of liquid medium on a MEMD is much smaller than on a MC. It is experimentally demonstrated that the MEMD works well in both air and liquid.

Detection of Sodium Ions by SPR Sensor Using Modified Self-Assembled Calix[4]Arene Deravative Monolayer

2015 ◽  
Vol 799-800 ◽  
pp. 915-918
Author(s):  
M. Benounis ◽  
Nicole Jaffrezic ◽  
Isabelle Bonnamour ◽  
Nadhir Messai
Keyword(s):  
Impedance Spectroscopy ◽  
Limit Of Detection ◽  
High Sensitivity ◽  
Gold Surface ◽  
Sodium Ions ◽  
Sensor Surface ◽  
Detection Range ◽  
Spr Sensor ◽  
Linear Detection ◽  
Influence Of Ph

A new SPR sensor surface based onself-assembled-Calix [4] arene-derivative-monolayer was proposed for the detection of sodium in water. The immobisation of claixarene onto the gold surface was confirmed by impedance spectroscopy (EIS). Three alkaliions were used K+, Na+and Ca2+and the influence of pH on ions detection was studied and optimized. The Calix [4] arene-gold SPR sensor developed was characterized by low limit of detection (LOD) for about 10-10M, high sensitivity and wide linear detection range between 10-6M and 10-14M.

Development of Novel Magnetostrictive Fe-Co-B Thin Films as a High Frequency Sensor Platform

2015 ◽  
Vol 1720 ◽  
Author(s):  
Zhizhi Sheng ◽  
Z.-Y. Cheng
Keyword(s):  
Thin Films ◽  
High Frequency ◽  
Deposition Time ◽  
Nanocrystalline Structure ◽  
Deposition Condition ◽  
Potential Candidate ◽  
Q Value ◽  
Resonance Behavior ◽  
Frequency Sensor ◽  
Sensor Platform

ABSTRACTFe-Co-B was identified as a potential candidate for the development of high-frequency sensors and high-frequency actuators. To fabricate high-frequency magnetostrictive resonators, Fe-Co-B magetostrictive thin films were prepared by combining electrochemical deposition and microfabrication processes. It is crucial to obtain thin films with proper microstructure and composition. Results showed that Fe-rich Fe-Co-B thin films exhibited better resonance behavior than those with Co-rich and equiatomic Fe and Co compositions. It is also found that the deposition condition plays an important role on the performance of the films. Fe55Co28B17 thin films were fabricated under the same current density for different times. The films exhibited nanocrystalline structure, circular nodules as surface morphology and good resonance behavior. Fe/Co ratio on surface and cross section slightly decreased with increasing the deposition time. The resonance frequency slightly increased and the Q value was found to decrease with increasing deposition time.

Sign in / Sign up

Export Citation Format

Share Document