Templating Approaches Using Natural Cellular Plant Tissue

MRS Bulletin ◽  
2010 ◽  
Vol 35 (2) ◽  
pp. 145-149 ◽  
Author(s):  
Peter Greil
Keyword(s):  
Cell Wall ◽  
Plant Tissue ◽  
Cell Walls ◽  
Carbon Composite ◽  
Inert Atmosphere ◽  
Wall Material ◽  
Low Viscosity ◽  
Novel Approach ◽  
Metal Organic ◽  
A Cell

AbstractBiological preforms such as plant tissue offer a novel approach for manufacturing biomorphous ceramics with an anisotropic cellular micro- and macrostructure pseudomorphous to the natural template structure. Mimicking the hierarchical microstructure of the native template at different length scales from large vessels (mm) down to a cell wall microstructure (μm to nm) offers the possibility to tailor the local strut microstructure in biomorphous ceramics in order to improve mechanical properties at low density. Mineralization may be achieved by intercalation of the cell walls with an inorganic, metal organic, or organometallic sol. Heating above the pyrolysis temperature of the hydrocarbons forming the cell wall material in an inert atmosphere finally results in a positive replica of the cellular structure with a metal oxide/carbon composite forming the cell walls. Amorphous, nano- or microcrystalline C/Si-O-C(-N) composite materials are obtained by infiltration with a low viscosity preceramic polymeric precursor, such as polycarbosilane, -silazane, -siloxane, or a copolymer or mixture thereof. Pyrolysis into a biocarbon template and subsequent metal alloy melt or vapor infiltration and reaction at high temperatures above 1000°C is an alternate way to produce single and multiphase carbides and composites.

THE EFFECT OF PENICILLIN ON THE STRUCTURE OF STAPHYLOCOCCAL CELL WALLS

1959 ◽  
Vol 5 (6) ◽  
pp. 641-648 ◽  
Author(s):  
R. G. E. Murray ◽  
W. H. Francombe ◽  
B. H. Mayall
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Untreated Control ◽  
Osmium Tetroxide ◽  
Wall Material ◽  
Cell Wall Material ◽  
Cell Wall Synthesis ◽  
Cell Wall Component ◽  
A Cell ◽  
Resistant Strains

Cultures of sensitive stains of Staphylococcus aureus were fixed with osmium tetroxide after 1–5 hours' exposure to various does of pencillin and were embedded in methacrylate for sectioning and electron microscopy. They were compared with untreated, control cultures. The contrast of the cell wall material was untreated, control cultures. The contrast of the cell wall material was increased, by cutting the section of lanthanum nitrate.The cells increased in size and the surrounding cell wall was thinner than normal. The main lesions appeared in the developing cell wall septa, which showed a loss in density and gross irregularity of shape. Some questionable inclusions were seen in the cytoplasm. Lysis was prevented in a medium containing 0.3 M sucrose and the stable spheroplasts retained a recognizable cell wall after 24 hours' exposure to penicillin. However, the septa could not be demonstrated in the cells treated in sucrose medium.Two resistant strains were exposed to penicillin. In one, the cells showed no morphological effects; in the other, there was temporary damage to the cell septa with complete recovery.The observations support the hypothesis that penicillin interferes with the synthesis of a cell wall component and indicate that the main point of cell wall synthesis is at the site of septum formation.

Studies of the structure and chemical composition of the cell walls of Vaucheriaceae and Saprolegniaceae

1963 ◽  
Vol 158 (973) ◽  
pp. 435-445 ◽  
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Insoluble Fraction ◽  
Water Soluble ◽  
Hot Water ◽  
Cellulose Microfibrils ◽  
Wall Material ◽  
Native Cellulose ◽  
A Cell ◽  
Crystalline Component

The cell walls of members of the Vaucheriaceae and Saprolegniaceae have been examined by X-ray analysis and electron microscopy, and their composition determined by hydrolysis and paper partition chromatography of the hydrolysates. Both differences and similarities between the members of these two species examined are found to supplement the comparative morphological and physiological information at present available. Saprolegnia , Achlya , Brevilegnia and Dictyuchus among the Saprolegniaceae possess hot-water soluble polysaccharides containing glucose residues only. This polysaccharide is not crystallographically identical with the polysaccharide found in Vaucheria sessilis with a similar solubility. The members of the Saprolegniaceae contain large amounts of alkali-soluble polysaccharides in contrast with the negligible amount found in V. sessilis . These polysaccharides are only weakly crystalline, but the indications are that the same polysaccharides may occur through­out the Saprolegniaceae. The alkali-insoluble wall material of Vaucheria species consists of highly crystalline native cellulose with large, apparently randomly arranged, microfibrils. The hydrolysate of this material contains ribose, xylose and arabinose in addition to glucose, presumably representing strongly bound pentosans. Native cellulose also occurs in the Saprolegniaceae but only in small proportion. The bulk of the alkali-insoluble fraction in the walls of these fungi appears amorphous in the electron microscope and is only weakly crystalline. It consists of one or m ore substances containing glucose, mannose, ribose and possibly other sugars together with traces of glucosamine. These substances presumably cover the cellulose microfibrils. The total quantity of non-cellulosic polysaccharide in the Saprolegniaceae approaches 85% of the total wall weight in contrast with the situation in Vaucheria where the cellulose alone approaches 90% of the total cell wall. Dichotomosiphon is unique among the organism s studied in this paper, in possessing a cell wall entirely soluble in alkali and composed of approximately equal quantities of glucose and xylose. The crystalline component is aβ-1,3-linked xylan, as already reported for some of the Siphonales (closely related algae) by Frei & Preston.

Synchrotron infrared microspectroscopy reveals the response of Sphagnum cell wall material to its aqueous chemical environment

2018 ◽  
Vol 15 (8) ◽  
pp. 513
Author(s):  
Ewen Silvester ◽  
Annaleise R. Klein ◽  
Kerry L. Whitworth ◽  
Ljiljana Puskar ◽  
Mark J. Tobin
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Chemical Environment ◽  
Wall Material ◽  
Organic Soils ◽  
Cell Wall Material ◽  
Acid Base ◽  
Widespread Species ◽  
Flowing Liquid ◽  
Infrared Microspectroscopy

Environmental contextSphagnum moss is a widespread species in peatlands globally and responsible for a large fraction of carbon storage in these systems. We used synchrotron infrared microspectroscopy to characterise the acid-base properties of Sphagnum moss and the conditions under which calcium uptake can occur (essential for plant tissue integrity). The work allows a chemical model for Sphagnum distribution in the landscape to be proposed. AbstractSphagnum is one the major moss types responsible for the deposition of organic soils in peatland systems. The cell walls of this moss have a high proportion of carboxylated polysaccharides (polygalacturonic acids), which act as ion exchangers and are likely to be important for the structural integrity of the cell walls. We used synchrotron light source infrared microspectroscopy to characterise the acid-base and calcium complexation properties of the cell walls of Sphagnum cristatum stems, using freshly sectioned tissue confined in a flowing liquid cell with both normal water and D2O media. The Fourier transform infrared spectra of acid and base forms are consistent with those expected for protonated and deprotonated aliphatic carboxylic acids (such as uronic acids). Spectral deconvolution shows that the dominant aliphatic carboxylic groups in this material behave as a monoprotic acid (pKa=4.97–6.04). The cell wall material shows a high affinity for calcium, with a binding constant (K) in the range 103.9–104.7 (1:1 complex). The chemical complexation model developed here allows for the prediction of the chemical environment (e.g. pH, ionic content) under which Ca2+ uptake can occur, and provides an improved understanding for the observed distribution of Sphagnum in the landscape.

scholarly journals Organismal view of a plant and a plant cell.

2001 ◽  
Vol 48 (2) ◽  
pp. 443-451 ◽  
Author(s):  
P Wojtaszek
Keyword(s):  
Cell Wall ◽  
Plant Cell ◽  
Cell Walls ◽  
Growth Time ◽  
Dead Cell ◽  
Plant Body ◽  
The Status ◽  
A Cell ◽  
Plant Form ◽  
Biological Organisation

Cell walls are at the basis of a structural, four-dimensional framework of plant form and growth time. Recent rapid progress of cell wall research has led to the situation where the old, long-lasting juxtaposition: "living" protoplast--"dead" cell wall, had to be dropped. Various attempts of re-interpretation cast, however, some doubts over the very nature of plant cell and the status of the walls within such a cell. Following a comparison of exocellular matrices of plants and animals, their position in relation to cells and organisms is analysed. A multitude of perspectives of the biological organisation of living beings is presented with particular attention paid to the cellular and organismal theories. Basic tenets and resulting corollaries of both theories are compared, and evolutionary and developmental implications are considered. Based on these data, "The Plant Body"--an organismal concept of plants and plant cells is described.

scholarly journals Secretion of Cryparin, a Fungal Hydrophobin

1999 ◽  
Vol 65 (12) ◽  
pp. 5431-5435 ◽  
Author(s):  
Patricia M. McCabe ◽  
Neal K. Van Alfen
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Submerged Culture ◽  
Secretory Pathway ◽  
Culture Medium ◽  
Secretory Vesicle ◽  
Cryphonectria Parasitica ◽  
Secreted Protein ◽  
Filamentous Ascomycete ◽  
A Cell

ABSTRACT Cryparin is a cell-surface-associated hydrophobin of the filamentous ascomycete Cryphonectria parasitica. This protein contains a signal peptide that directs it to the vesicle-mediated secretory pathway. We detected a glycosylated form of cryparin in a secretory vesicle fraction, but secreted forms of this protein are not glycosylated. This glycosylation occurred in the proprotein region, which is cleaved during maturation by a Kex2-like serine protease, leaving a mature form of cryparin that could be isolated from both the cell wall and culture medium. Pulse-chase labeling experiments showed that cryparin was secreted through the cell wall, without being bound, into the culture medium. The secreted protein then binds to the cell walls ofC. parasitica, where it remains. Binding of cryparin to the cell wall occurred in submerged culture, presumably because of the lectin-like properties unique to this hydrophobin. Thus, the binding of this hydrophobin to the cell wall is different from that of other hydrophobins which are reported to require a hydrophobic-hydrophilic interface for assembly.

Observations on the Scutellum. III. Ferulic Acid as a Component of the Cell Wall in Wheat and Barley

1979 ◽  
Vol 6 (4) ◽  
pp. 485 ◽  
Author(s):  
MG Smart ◽  
TP O'brien
Keyword(s):  
Cell Wall ◽  
Ferulic Acid ◽  
Cell Walls ◽  
Inert Atmosphere ◽  
Ultraviolet Spectroscopy ◽  
Alkaline Extraction ◽  
Coumaric Acid ◽  
Ether Extract ◽  
Solvent Systems ◽  
Layer Chromatography

Fractions enriched in the cell walls of wheat and barley scutella were prepared from isolated, ungerminated scutella. The cell-wall fractions were subjected to hot, alkaline extraction under an inert atmosphere. An ether extract was investigated for phenolic compounds by thin-layer chromatography using three solvent systems and by ultraviolet spectroscopy. The major autofluorescent component of the scutella of both wheat and barley is ferulic acid. There is apparently no p-coumaric acid.

scholarly journals A MORPHOLOGICAL STUDY OF HALOBACTERIUM HALOBIUM AND ITS LYSIS IN MEDIA OF LOW SALT CONCENTRATION

1967 ◽  
Vol 34 (1) ◽  
pp. 365-393 ◽  
Author(s):  
Walther Stoeckenius ◽  
Robert Rowen
Keyword(s):  
Cell Wall ◽  
Cell Membrane ◽  
Salt Concentration ◽  
Prolonged Exposure ◽  
Structural Characteristics ◽  
Wall Material ◽  
Breakdown Product ◽  
Distilled Water ◽  
Fixation Techniques ◽  
A Cell

The reported absence of a cell wall in halobacteria cannot be confirmed. Improved fixation techniques clearly show a cell wall-like structure on the surface of these cells. A stepwise reduction of the salt concentration causes the release of cell wall material before the cell membrane begins to disintegrate. The cell membrane breaks up into fragments of variable but rather small size, which are clearly different from a 4S component reported by others to be the major breakdown product of the cell membrane. It appears more likely that the 4S component arises from the dissolution of the cell wall. A residue of large membranous sheets remains even after prolonged exposure of halobacteria envelopes to distilled water. The lipids in these sheets do not differ significantly from the lipids in the lysed part of the cell membrane. The sheets, however, contain a purple-colored substance, which is not present in the lysed part. The easily sedimentable residue that remains after lysis of the cells or envelopes in distilled water also contains "intracytoplasmic membranes" with unusual structural characteristics. They can also be identified in sections through intact bacteria or envelope preparations. Their function is at present unknown but seems to be related to the formation of gas vacuoles in these organisms.

Étude cytochimique ultrastructurale de la dégradation des lignines dans les résidus pariétaux de bois d'épicéa et de peuplier par le Reticulitermes lucifugus var. santonensis (Rhinotermitidae, Isoptera)

1992 ◽  
Vol 70 (5) ◽  
pp. 933-941 ◽  
Author(s):  
E. Garnier-Sillam ◽  
I. Grech ◽  
Y. Czaninski ◽  
M.-T. Tollier ◽  
B. Monties
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Periodic Acid ◽  
Mechanical Action ◽  
Free Cell ◽  
Uranyl Acetate ◽  
Picea Sitchensis ◽  
Wall Material ◽  
Before And After ◽  
Acetate Lead

Free cell-wall residues were prepared by extracting wood samples of spruce (Populus euramericana cv. Fidzi Pauley) and poplar (Picea sitchensis). These species were chosen for their lignin types: guaiacyl in spruce and guaiacyl–syringyl in poplar. The parietal residues obtained were used as the sole food for the xylophagous termite Reticulitermes lucifugus var. santonensis and were compared before and after ingestion and transit in the digestive tracts. Differences due to the mechanical action of the gizzard were found in association with chemical changes. Polysaccharides were unmasked after digestion and could clearly be observed after reaction with periodic acid – thiocarbohydrazide – silver proteinate. A fibrillary meshwork was also observed inside the lignified cell walls. Biodegradation of cell wall material was particularly clear in poplar where granules formed an electron-dense plasma when uranyl acetate – lead citrate or periodic acid – thiocarbohydrazide – silver proteinate was used as a contrast medium. A selective biodegradation of syringyl monomers in poplar parietal residues was indicated by thioacidolysis but requires confirmation. Breakdown of lignified cell walls begins with a biodegradation of the lignin network associated with or followed by the digestion of polysaccharides. Syringyl-rich lignin fractions seemed to break down faster. Whether the enzymic pathway leading to ligninolysis originates from the termite digestive cells or from the endosymbionts present in their digestive tract lumen remains to be defined. Key words: Isoptera, Reticulitermes lucifugus var. santonensis, wood, lignin, spruce, poplar.

Ultrastructure des parois de cerises Bigarreau Burlat de textures différentes au cours de la maturation

1996 ◽  
Vol 74 (12) ◽  
pp. 1974-1981 ◽  
Author(s):  
C. Batisse ◽  
P. J. Coulomb ◽  
C. Coulomb ◽  
M. Buret
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Middle Lamella ◽  
Primary Cell ◽  
Wall Material ◽  
Cell Wall Degradation ◽  
Composition And Structure ◽  
Cell Wall Texture ◽  
Synthesis And Degradation ◽  
Soft Fruits

The changes in texture of fruits during ripening are linked to cell wall degradation involving synthesis and degradation of polymers. An increase in pectin solubility leads to cell sliding and an elastic aspect of tissues. The biochemical cell wall process differs between soft and crisp fruits originating from a same cultivar but cultivated under different agroclimatic conditions. Although the proportions of cell wall material are similar, the composition and structure of the two cell walls are very different at maturity. A solubilization of the middle lamella and a restructuration of the primary cell walls arising from the cells separation is observed in crisp fruits. In contrast, the middle lamella of the soft fruits is better preserved and the primary cell walls are thin and show degradation bags delimited by residual membrane formations. In addition, the macroendocytosis process by endosome individualization is more important in soft fruits. In conclusion, the fruit texture depends on the extent of the links between cell wall polymers. Keywords: cherry, cell wall, texture, ultrastructural study.

Experimental study on in-plane compressive response of irregular honeycombs

2017 ◽  
Vol 52 (8) ◽  
pp. 1121-1135
Author(s):  
Youming Chen ◽  
Raj Das ◽  
Mark Battley
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Mechanical Performance ◽  
Three Dimensional ◽  
Compressive Load ◽  
Neighbouring Cell ◽  
Deformation And Failure ◽  
Compressive Response ◽  
A Cell ◽  
Foam Mechanics

Compared with regular honeycombs, irregular honeycombs are more representative of real foams, and thus more suitable for the study of foam mechanics. In this paper, the deformation and failure progression in the irregular honeycombs are investigated by analysing the images captured in order to gain an improved understanding on foam failure. Irregular honeycombs with varying cell wall thickness, cell size and cell shape were manufactured using a three-dimensional printer and tested under compression. The behaviour of irregular honeycombs is found to be different from that of regular honeycombs. In irregular honeycombs, cell walls start to fracture at some point, initially at a low speed from multiple locations. The global stress reaches its maximum value shortly after the first fracture of cell walls. Only a few cell walls buckle in the specimens with cells of irregular shape. Fracture is more likely to occur to thin and long cell walls aligned within a medium angle (around 30 to 60°) to the compressive load. However, the susceptibility of a cell wall is to fracture is also affected by its neighbouring cell walls. Strong and stiff neighbouring cell walls could shield load away and protect it from breaking. Because of this, it is better to think of a weak spot as a region, rather than an individual cell or cell wall. Overall, the more uniform cell wall size and thickness are, the better the mechanical performance of cellular solids is.

Sign in / Sign up

Export Citation Format

Share Document