Aqueous chemical solution deposition of ultrathin lanthanide oxide dielectric films

2007 ◽  
Vol 22 (12) ◽  
pp. 3484-3493 ◽  
Author(s):  
An Hardy ◽  
Sven Van Elshocht ◽  
Jan D’Haen ◽  
Olivier Douhéret ◽  
Stefan De Gendt ◽  
...  

Ultrathin lanthanide (Nd, Pr, Eu, Sm) oxide films with functional dielectric properties down to 3.3 nm thickness were deposited by aqueous chemical solution deposition (CSD) onto hydrophilic SiO2/Si substrates. Precursor solutions were prepared from the oxides via an intermediate, solid Ln(III)citrate. A film heat treatment scheme was derived from thermogravimetric analysis of the precursor gels, showing complete decomposition by 600 °C. Crystalline phase formation in the films depended on the lanthanide, annealing temperature, and citric acid content in the precursor. Through variation of the precursor concentration and number of deposited layers, thickness series of uniform films were obtained down to ∼3 nm. The film uniformity was demonstrated both by atomic force microscopy and cross-section transmission electron microscopy. The lanthanide oxide films possessed good dielectric properties. It was concluded that aqueous CSD allows deposition of uniform ultrathin films and may be useful for the evaluation of new high-k candidate materials.

2020 ◽  
Vol 8 (15) ◽  
pp. 5102-5111
Author(s):  
Nikolai Helth Gaukås ◽  
Julia Glaum ◽  
Mari-Ann Einarsrud ◽  
Tor Grande

Doped K0.5Na0.5NbO3 films with good ferroelectric and dielectric properties were prepared by aqueous chemical solution deposition on platinized Si substrates.


2013 ◽  
Vol 03 (02) ◽  
pp. 1350011 ◽  
Author(s):  
Wanlin Zhu ◽  
Wei Ren ◽  
Hong Xin ◽  
Peng Shi ◽  
Xiaoqing Wu

Ferroelectric Pb ( Zr 0.52 Ti 0.48) O 3 (PZT) thick films with highly (100) preferential orientation have been prepared by chemical solution deposition process on Pt / Ti / SiO 2/(100) Si substrates and pyrolyzed at 350°C–450°C, then annealed at 650°C. The typical thickness of the films is 3.9 μm. Effects of the pyrolysis temperature and excess PbO on the orientation, dielectric and ferroelectric properties of PZT thick films have been discussed. Domain switching and depoling process were studied by piezoelectric force microscopy. (100) oriented PZT films exhibit enhanced electrical properties. The dielectric constant and loss tangent of the films are 1444 and 0.022 at 1 kHz, respectively. The remnant polarization increases from 27.6 to 34.6 μC/cm2, and the coercive field decreases from 61.4 to 43.5 kV/cm, when the orientation of the films changes from the random orientation to the preferential (100) orientation. The leakage current density is 10-8 A/cm2 at dc field of 0.25 kV/cm, and then increases to 10-6 A/cm2 at 40 kV/cm. The piezoelectric response of the oriented films is investigated by Piezoelecric Force Microscopy (PFM).


2006 ◽  
Vol 21 (3) ◽  
pp. 767-773 ◽  
Author(s):  
M.S. Bhuiyan ◽  
M. Paranthaman ◽  
A. Goyal ◽  
L. Heatherly ◽  
D.B. Beach

Epitaxial films of rare-earth (RE = La, Ce, Eu, and Gd) tantalates, RE3TaO7 with pyrochlore structures were grown on biaxially textured nickel-3 at.% tungsten (Ni-W) substrates using chemical solution deposition (CSD) process. Precursor solution of 0.3∼0.4 M concentration of total cations were spin coated on to short samples of Ni-W substrates and the films were crystallized at 1050∼1100 °C in a gas mixture of Ar- 4% H2 for 15 to 60 min. X-ray studies show that the films of pyrochlore RE tantalate films are highly textured with cube-on-cube epitaxy. Improved texture was observed in case of lanthanum tantalate (La3TaO7) film grown on Ni-W substrates. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) investigations of RE3TaO7 films reveal a fairly dense and smooth microstructure without cracks and porosity. The rare-earth tantalate layers may be potentially used as buffer layers for YBa2Cu3O7-δ (YBCO) coated conductors.


2021 ◽  
Vol 21 (4) ◽  
pp. 2681-2686
Author(s):  
Nguyen Ngoc Minh ◽  
Bui Van Dan ◽  
Nguyen Duc Minh ◽  
Guus Rijnders ◽  
Ngo Duc Quan

Lead-free Bi0.5K0.5TiO3 (BKT) ferroelectric films were synthesized on Pt/Ti/SiO2/Si substrates via the chemical solution deposition. The influence of the excess potassium on the microstructures and the ferroelectric properties of the films was investigated in detail. The results showed that the BKT films have reached the well-crystallized state in the single-phase perovskite structure with 20 mol.% excess amount of potassium. For this film, the ferroelectric properties of the films were significantly enhanced. The remnant polarization (Pr) and maximum polarization (Pm) reached the highest values of 9.4 μC/cm2 and 32.2 μC/cm2, respectively, under the electric field of 400 kV/cm.


RSC Advances ◽  
2016 ◽  
Vol 6 (82) ◽  
pp. 78629-78635 ◽  
Author(s):  
Linghua Jin ◽  
Xianwu Tang ◽  
Renhuai Wei ◽  
Bingbing Yang ◽  
Jie Yang ◽  
...  

Multiferroic BiFeO3 (BFO) thin films with a thickness larger than 400 nm are grown on solution-derived LaNiO3 coated Si substrates via chemical solution deposition.


Sign in / Sign up

Export Citation Format

Share Document