Nano-patterning on Si (100) surface under specific ion irradiation environment

MRS Advances ◽  
2019 ◽  
Vol 4 (28-29) ◽  
pp. 1673-1682 ◽  
Author(s):  
R. P. Yadav ◽  
Vandana ◽  
Jyoti Malik ◽  
Jyoti Yadav ◽  
A. K. Mittal ◽  
...  
Keyword(s):  
Energy Demand ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Normal Incidence ◽  
Rural India ◽  
Solar Systems ◽  
Force Microscopy ◽  
Atomic Force ◽  
Potential Applications ◽  
Ripple Patterns

AbstractNano-patterned surfaces have potential applications in the development of efficient solar cells through multiple internal reflections and may be used to fulfil the energy demand of rural India. Therefore, the basic understanding of growth mechanism of patterns under ion irradiation is much required. Here, the ripple patterns are grown on Si (100) surfaces for two specific ion irradiation conditions. First, the two set of samples (namely set-A and set-B) of Si (100) are irradiated by 50 keVAr+ ion beam at oblique (60°) and normal incidence, respectively, using ion fluence of 5×1016 ions/ cm2. The aim of this first stage irradiation at two different angles is the creation of different depth locations of amorphous/crystalline (a/c) interface while keeping the free surface similar in surface features, which is a crucial parameter in surface growth. Further, the sequential second stage irradiation is carried out at 60° for the same energy of Ar beam for the fluences 3×1017 to 9×1017 ions/cm2 to see the evolution of ripple patterns. Atomic force microscopy (AFM) study shows that the ripple pattern ordering is better in set-A rather than set-B. Lateral correlation length of each ripple structure surface is computed by autocorrelation function while roughness exponent is measured with height-height correlation function. Fractals behaviors of patterned on Si (100) surface are found to be sensitive to the two stage irradiation approach. The understanding of the mechanism of nano-patterns formation may be useful to develop efficient solar systems for the needs of energy in rural India.

scholarly journals Modelling of Optical Damage in Nanorippled ZnO Produced by Ion Irradiation

Crystals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 453
Author(s):  
Redondo-Cubero ◽  
Vázquez ◽  
Jalabert ◽  
Lorenz ◽  
Sedrine
Keyword(s):  
Ion Irradiation ◽  
Ion Beam ◽  
Ion Scattering ◽  
Force Microscopy ◽  
Enhanced Absorption ◽  
High Fluences ◽  
Atomic Force ◽  
Ripple Patterns ◽  
Medium Energy Ion Scattering ◽  
Induced Changes

Here, we report on the production of nanoripples on the surface of ZnO bulk substrates by ion beam erosion with 20 keV Ar+ ions at an oblique incidence (60°). The ripple patterns, analyzed by atomic force microscopy, follow a power law dependence for both the roughness and the wavelength. At high fluences these ripples show coarsening and asymmetric shapes, which become independent of the beam direction and evidence additional mechanisms for the pattern development. The shallow damaged layer is not fully amorphized by this process, as confirmed by medium energy ion scattering. A detailed study of the damage-induced changes on the optical properties was carried out by means of spectroscopic ellipsometry. Using a 3-layer model based on Tauc-Lorenz and critical point parameter band oscillators, the optical constants of the damaged layer were determined. The results showed a progressive reduction in the refractive index and enhanced absorption below the bandgap with the fluence.

Study of Swift Heavy Ion Irradiation Induced Nanophases of TiO2

2013 ◽  
Vol 24 ◽  
pp. 133-139 ◽  
Author(s):  
Madhavi Thakurdesai ◽  
A. Mahadkar ◽  
Varsha Bhattacharyya
Keyword(s):  
Thin Films ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Heavy Ion ◽  
High Energy ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Non Equilibrium

Ion beam irradiation is a unique non-equilibrium technique for phase formation and material modification. Localized rise in temperature and ultra fast (~1012 s) dissipations of impinging energy make it an attractive tool for nanostructure synthesize. Dense electronic excitation induced spatial and temporal confinement of high energy in a narrow dimension leads the system to a highly non-equilibrium state and the system then relaxes dynamically inducing nucleation of nanocrystals along the latent track. In the present investigation, amorphous thin films of TiO2 are irradiated by 100 MeV Ag ion beam. These irradiated thin films are characterized by Atomic Force Microscopy (AFM), Glancing Angle X-ray Diffraction (GAXRD), Transmission Electron Microscopy (TEM) and UV-VIS absorption spectroscopy. AFM and TEM studies indicate formation of circular nanoparticles of size 10±2 nm in a film irradiated at a fluence of 1×1012 ions.cm-2. Nanophase formation is also inferred from the blueshift observed in UV-VIS absorption band edge.

scholarly journals The Infuence of Salicin on Rheological and Film-Forming Properties of Collagen

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1661
Author(s):  
Katarzyna Adamiak ◽  
Katarzyna Lewandowska ◽  
Alina Sionkowska
Keyword(s):  
Mechanical Properties ◽  
Atomic Force Microscopy ◽  
Infrared Spectroscopy ◽  
Rheological Properties ◽  
Silver Carp ◽  
Shear Tests ◽  
Force Microscopy ◽  
Atomic Force ◽  
Film Forming ◽  
Potential Applications

Collagen films are widely used as adhesives in medicine and cosmetology. However, its properties require modification. In this work, the influence of salicin on the properties of collagen solution and films was studied. Collagen was extracted from silver carp skin. The rheological properties of collagen solutions with and without salicin were characterized by steady shear tests. Thin collagen films were prepared by solvent evaporation. The structure of films was researched using infrared spectroscopy. The surface properties of films were investigated using Atomic Force Microscopy (AFM). Mechanical properties were measured as well. It was found that the addition of salicin modified the roughness of collagen films and their mechanical and rheological properties. The above-mentioned parameters are very important in potential applications of collagen films containing salicin.

Extending AFM Phase Image of Nanocomposite Structures to 3D using FIB

2012 ◽  
Vol 1421 ◽  
Author(s):  
Russell J. Bailey ◽  
Remco Geurts ◽  
Debbie J. Stokes ◽  
Frank de Jong ◽  
Asa H. Barber
Keyword(s):  
Phase Contrast ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Polymer Nanocomposite ◽  
Three Dimensions ◽  
Phase Image ◽  
Force Microscopy ◽  
Atomic Force ◽  
Mechanical Information ◽  
Nanocomposite Structures

ABSTRACTThe mechanical behavior of nanocomposites is critically dependent on their structural composition. In this paper we use Focused Ion Beam (FIB) microscopy to prepare surfaces from a layered polymer nanocomposite for investigation using phase contrast atomic force microscopy (AFM). Phase contrast AFM provides mechanical information on the surface examined and, by combining with the sequential cross-sectioning of FIB, can extend the phase contract AFM into three dimensions.

Preparation and Characterization of Chitosan-Casein Phosphopeptides Biocomposite Coatings on the Medical Titanium Alloy

2011 ◽  
Vol 480-481 ◽  
pp. 1065-1069
Author(s):  
Bin Liu ◽  
Lin Wang ◽  
Yin Zhong Bu ◽  
Sheng Rong Yang ◽  
Jin Qing Wang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Attenuated Total Reflectance ◽  
Ti Alloy ◽  
Force Microscopy ◽  
Implant Materials ◽  
Atomic Force ◽  
Casein Phosphopeptides ◽  
Potential Applications ◽  
First Time

Titanium (Ti) and its alloys have been applied in orthopedics as one of the most popular biomedical metallic implant materials. In this work, to enhance the bioactivity, the surface of Ti alloy pre-modified by silane coupling agent and glutaraldehyde was covalently grafted with chitosan (CS) via biochemical multistep self-assembled method. Then, for the first time, the achieved surface was further immobilized with casein phosphopeptides (CPP), which are one group of bioactive peptides released from caseins in the digestive tract and can facilitate the calcium adsorption and usage, to form CS-CPP biocomposite coatings. The structure and composition of the fabricated coatings were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and atomic force microscopy (AFM). As the experimental results indicated, multi-step assembly was successfully performed, and the CS and CPP were assembled onto the Ti alloy surface orderly. It is anticipated that the Ti alloys modified by CS-CPP biocomposite coatings will find potential applications as implant materials in biomedical fields.

Biophysical Modeling of Fragment Length Distributions of DNA Plasmids after X and Heavy-Ion Irradiation Analyzed by Atomic Force Microscopy

2008 ◽  
Vol 169 (6) ◽  
pp. 649-659 ◽  
Author(s):  
Thilo Elsässer ◽  
Stephan Brons ◽  
Katarzyna Psonka ◽  
Michael Scholz ◽  
Ewa Gudowska-Nowak ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Fragment Length ◽  
Ion Irradiation ◽  
Heavy Ion ◽  
Biophysical Modeling ◽  
Force Microscopy ◽  
Heavy Ion Irradiation ◽  
Atomic Force

Fabrication of Ga-templates Using a Focused Ion Beam

2009 ◽  
Vol 1228 ◽  
Author(s):  
Hao Wang ◽  
Greg C. Hartman ◽  
Joshua Williams ◽  
Jennifer L. Gray
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Processing Conditions ◽  
New Materials ◽  
Force Microscopy ◽  
Atomic Force ◽  
Nitridation Process ◽  
Microscopy Characterization ◽  
Device Technology

AbstractThere are many factors that have the potential to limit significant advances in device technology. These include the ability to arrange materials at shrinking dimensions and the ability to successfully integrate new materials with better properties or new functionalities. To overcome these limitations, the development of advanced processing methods that can organize various combinations of materials at nano-scale dimensions with the necessary quality and reliability is required. We have explored using a gallium focused ion beam (FIB) as a method of integrating highly mismatched materials with silicon by creating template patterns directly on Si with nanoscale resolution. These templates are potentially useful as a means of locally controlling topography at nanoscale dimensions or as a means of locally implanting Ga at specific surface sites. We have annealed these templates in vacuum to study the effects of ion dosage on local Ga concentration and topography. We have also investigated the feasibility of creating Ga nanodots using this method that could eventually be converted to GaN through a nitridation process. Atomic force microscopy and electron microscopy characterization of the resulting structures are shown for a variety of patterning and processing conditions.

Microstructural Study of a Passivation Layer on GaAs: An Application of X-Ray Reflectivity Under Grazing Angles Using a Synchrotron Source

2003 ◽  
Vol 10 (02n03) ◽  
pp. 373-379 ◽  
Author(s):  
K. E. Crompton ◽  
T. R. Finlayson ◽  
C. Kirchner ◽  
M. Seitz ◽  
U. Klemradt
Keyword(s):  
External Surface ◽  
Synchrotron Source ◽  
Microstructural Study ◽  
X Ray ◽  
Force Microscopy ◽  
Microstructural Parameters ◽  
Atomic Force ◽  
Potential Applications ◽  
Grazing Angles ◽  
Mode Atomic Force Microscopy

X-ray specular reflectivities of GaAs samples passivated with a thin film of (3-mercaptopropyl)-trimethoxysilane (MPT) have been studied using bending-magnet synchrotron radiation. Various preparation procedures covering etching the GaAs, MPT deposition and its baking have been investigated. An oxide film is always observed between the GaAs and MPT films. The microstructural parameters, such as film thickness, density and interfacial roughness (including the external surface), have been determined from appropriate modeling of the reflectivity. The surface roughness has been compared with a direct measurement using tapping-mode atomic force microscopy. The results are discussed with reference to the potential applications of GaAs as a biosensor.

Sign in / Sign up

Export Citation Format

Share Document