Extending AFM Phase Image of Nanocomposite Structures to 3D using FIB

2012 ◽  
Vol 1421 ◽  
Author(s):  
Russell J. Bailey ◽  
Remco Geurts ◽  
Debbie J. Stokes ◽  
Frank de Jong ◽  
Asa H. Barber
Keyword(s):  
Phase Contrast ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Polymer Nanocomposite ◽  
Three Dimensions ◽  
Phase Image ◽  
Force Microscopy ◽  
Atomic Force ◽  
Mechanical Information ◽  
Nanocomposite Structures

ABSTRACTThe mechanical behavior of nanocomposites is critically dependent on their structural composition. In this paper we use Focused Ion Beam (FIB) microscopy to prepare surfaces from a layered polymer nanocomposite for investigation using phase contrast atomic force microscopy (AFM). Phase contrast AFM provides mechanical information on the surface examined and, by combining with the sequential cross-sectioning of FIB, can extend the phase contract AFM into three dimensions.

Fabrication of Ga-templates Using a Focused Ion Beam

2009 ◽  
Vol 1228 ◽  
Author(s):  
Hao Wang ◽  
Greg C. Hartman ◽  
Joshua Williams ◽  
Jennifer L. Gray
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Processing Conditions ◽  
New Materials ◽  
Force Microscopy ◽  
Atomic Force ◽  
Nitridation Process ◽  
Microscopy Characterization ◽  
Device Technology

AbstractThere are many factors that have the potential to limit significant advances in device technology. These include the ability to arrange materials at shrinking dimensions and the ability to successfully integrate new materials with better properties or new functionalities. To overcome these limitations, the development of advanced processing methods that can organize various combinations of materials at nano-scale dimensions with the necessary quality and reliability is required. We have explored using a gallium focused ion beam (FIB) as a method of integrating highly mismatched materials with silicon by creating template patterns directly on Si with nanoscale resolution. These templates are potentially useful as a means of locally controlling topography at nanoscale dimensions or as a means of locally implanting Ga at specific surface sites. We have annealed these templates in vacuum to study the effects of ion dosage on local Ga concentration and topography. We have also investigated the feasibility of creating Ga nanodots using this method that could eventually be converted to GaN through a nitridation process. Atomic force microscopy and electron microscopy characterization of the resulting structures are shown for a variety of patterning and processing conditions.

Study of Electrochemical Deposition of Copper and Microstructure Evolution in Fine Lines

1999 ◽  
Vol 562 ◽  
Author(s):  
Stephan Grunow ◽  
Deda Diatezua ◽  
Soon-Cheon Seo ◽  
Timothy Stoner ◽  
Alain E. KaloyerosI
Keyword(s):  
Electrochemical Deposition ◽  
Microstructure Evolution ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Process Window ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Underlying Mechanisms ◽  
Pure Cu

ABSTRACTAs computer chip technologies evolve from aluminum-based metallization schemes to their copper-based counterparts, Electrochemical Deposition (ECD) is emerging as a viable deposition technique for copper (Cu) interconnects. This paper presents the results of a first-pass study to examine the underlying mechanisms that control ECD Cu nucleation, growth kinetics, and post-deposition microstructure evolution (self-annealing), leading to the development and optimization of an ECD Cu process recipe for sub-quarter-micron device generations. The influence of bath composition, current waveform, type and texture of Cu seed layer, and device feature size (scaling effect) on the evolution of film texture, morphology, electrical properties, and fill characteristics was investigated using a manufacturing-worthy ReynoldsTech 8″ wafer plating tool. Resulting films were analyzed by X-ray Diffraction (XRD), four-point resistivity probe, Focused-Ion-Beam Scanning Electron Microscopy (FIB-SEM), and Atomic Force Microscopy (AFM). These investigations identified an optimized process window for the complete fill of aggressive device structures with pure Cu with resistivity ∼ 2.0 μΩ-cm and smooth surface morphology.

scholarly journals Structure-Function Correlative Microscopy of Peritubular and Intertubular Dentine

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1493 ◽  
Author(s):  
Tan Sui ◽  
Jiří Dluhoš ◽  
Tao Li ◽  
Kaiyang Zeng ◽  
Adrian Cernescu ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Volume Fraction ◽  
Ion Beam ◽  
Near Field ◽  
Structural Difference ◽  
Correlative Microscopy ◽  
Mineral Concentration ◽  
Force Microscopy ◽  
Atomic Force ◽  
Backscattered Electron

Peritubular dentine (PTD) and intertubular dentine (ITD) were investigated by 3D correlative Focused Ion Beam (FIB)-Scanning Electron Microscopy (SEM)-Energy Dispersive Spectroscopy (EDS) tomography, tapping mode Atomic Force Microscopy (AFM) and scattering-type Scanning Near-Field Optical Microscopy (s-SNOM) mapping. The brighter appearance of PTD in 3D SEM-Backscattered-Electron (BSE) imaging mode and the corresponding higher grey value indicate a greater mineral concentration in PTD (~160) compared to ITD (~152). However, the 3D FIB-SEM-EDS reconstruction and high resolution, quantitative 2D map of the Ca/P ratio (~1.8) fail to distinguish between PTD and ITD. This has been further confirmed using nanoscale 2D AFM map, which clearly visualised biopolymers and hydroxyapatite (HAp) crystallites with larger mean crystallite size in ITD (32 ± 8 nm) than that in PTD (22 ± 3 nm). Correlative microscopy reveals that the principal difference between PTD and ITD arises primarily from the nanoscale packing density of the crystallites bonded together by thin biopolymer, with moderate contribution from the chemical composition difference. The structural difference results in the mechanical properties variation that is described by the parabolic stiffness-volume fraction correlation function introduced here. The obtained results benefit a microstructure-based mechano-chemical model to simulate the chemical etching process that can occur in human dental caries and some of its treatments.

High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy

2005 ◽  
Vol 38 (6) ◽  
pp. 2368-2375 ◽  
Author(s):  
Nick Virgilio ◽  
Basil D. Favis ◽  
Marie-France Pépin ◽  
Patrick Desjardins ◽  
Gilles L'Espérance
Keyword(s):  
Atomic Force Microscopy ◽  
Polymer Blends ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
High Contrast ◽  
Contrast Imaging ◽  
Force Microscopy ◽  
Atomic Force ◽  
High Contrast Imaging ◽  
Ternary Polymer

Guided Control of Cu2O Nanodot Self-Assembly on SrTiO3 (100)

2004 ◽  
Vol 811 ◽  
Author(s):  
Yingge Du ◽  
Surajit Atha ◽  
Robert Hull ◽  
James F. Groves ◽  
Igor Lyubinetsky ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Photocatalytic Decomposition ◽  
Process Conditions ◽  
Photochemical Process ◽  
Force Microscopy ◽  
Atomic Force

ABSTRACTA method has been developed for specifying the growth location of Cu2O nanodotson SrTiO3 (100) substrates. Growth location has been specified by using a focused ion beam (FIB) to modify microscopic and nanoscopic regions of the SrTiO3substrate prior to Cu2O deposition. Deposition onto the modified regions under carefully selected process conditions has generated nanodot growth at the edge of microscopic FIB-induced features and on top of nanoscopic FIB-induced features. For this work, an array of evenly spaced FIB implants was first patterned into several regions of each substrate. Within each sub-division of the array, the FIB implants were identical in Ga+ energy and dosage and implant diameter and spacing. After FIB surface modification and subsequent in-situ substrate cleaning, Cu2O nanodots were synthesized on the patterned SrTiO3 substrates using oxygen plasma assisted molecular beam epitaxy. The substrates and nanodots were characterized using atomic force microscopy at various stages of the process; in-situ X-ray photoelectron spectroscopy and Auger electron spectroscopy analysis demonstrated that the final stoichiometry of the nanodots was Cu2O. The photocatalytic decomposition of water on Cu2O under visible light irradiation has been reported. If the Cu2O can be located in the form ofislands on a carefully selected substrate, then it could be possible to greatly enhance the efficiency of the photochemical process.

FIB-assisted Pt Deposition for Carbon Nanotube Integration and 3-D Nanoengineering

2002 ◽  
Vol 739 ◽  
Author(s):  
K. Dovidenko ◽  
J. Rullan ◽  
R. Moore ◽  
K. A. Dunn ◽  
R. E. Geer ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Contact Lines ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Minimal Damage ◽  
Effective Use ◽  
Non Destructive

ABSTRACTIn this study, the Focused Ion Beam (FIB) instrument has been used for carbon nanotubes integration and nanoegineering studies. Results of thorough investigation (electrical, structural and chemical) of ultra-thin Pt contact lines and pads fabricated by the FIB, along with evaluation of nanomodification of the carbon nanotubes under the Ga+ ion beam and during Pt deposition are presented. The initial stages of FIB-assisted Pt deposition on multi-wall nanotubes are studied by transmission electron microscopy (TEM). The FIB parameters are optimized to provide non-destructive imaging and controllable Pt deposition with minimal damage on the nanotubes. We have demonstrated effective use of FIB-fabricated Pt pads as means of attaching the nanotubes to the substrate for atomic force and ultrasonic force microscopy studies.

Formation of High Aspect Ratio Nanostructures Using Focused Ion Beam Induced Deposition of Carbon

2015 ◽  
Vol 752-753 ◽  
pp. 154-158
Author(s):  
Oleg A. Ageev ◽  
Oleg I. Ilin ◽  
Alexei S. Kolomiytsev ◽  
Sergey A. Lisitsyn ◽  
Vladimir A. Smirnov ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Radius Of Curvature ◽  
Manufacturing Processes ◽  
Force Microscopy ◽  
Atomic Force ◽  
Accuracy Of Measurement ◽  
Electron Emitters ◽  
Probe Sensor ◽  
Local Deposition

This paper presents results of the formation of high aspect nanostructures by local deposition of carbon, stimulated by focused ion beam (FIB). The structures used in the modification of the probe sensors were cantilevers for atomic force microscopy (AFM). The FIB structure of 5 mm length and 50 mm radius of curvature formed on the surface of the cantilever tip has shown to improve the accuracy of measurement by AFM. The outcome of this study is useful for the development of manufacturing processes and modification of the probe sensor-cantilever AFM structures of field-electron emitters as well as in the studies of micro- and nanosystems technology.

Sign in / Sign up

Export Citation Format

Share Document