Application of enamel-coating for draught reduction of a mouldboard plough

2007 ◽  
Vol 3 (1) ◽  
pp. 115-129
Author(s):  
Ivan Loukanov ◽  
Jacek Uziak
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Working Conditions ◽  
Enamel Coating ◽  
Soil Moisture Content ◽  
Constant Speed ◽  
Percentage Reduction ◽  
Mouldboard Plough

The effect of enamel-coating on the draught performance of an animal-drawn mouldboard plough was studied. A single furrow swing mouldboard plough-Maun Series, and the same type enamel-coated plough both ox-drawn, are compared under similar working conditions such as soil moisture content, depth and width of cut and approximately constant speed of ploughing. It was found that the enamel-coating reduces both the plough draught and the specific draught. The percentage reduction of the plough draught for enamel-coated plough compared to uncoated plough varied from 12.7% at 25% soil moisture content to 18.1% at 32% soil moisture content (dry basis). It was also found that the percentage reduction of the specific draught achieved with the enamel-coated plough in comparison with the uncoated plough varied from 20.3% at 32% soil moisture content to 25.7% at 25% soil moisture content (dry basis).

scholarly journals Draught requirements of enamel coated animal drawn mouldboard plough

2012 ◽  
Vol 51 (No. 2) ◽  
pp. 56-62 ◽  
Author(s):  
I. A Loukanov ◽  
J. Uziak ◽  
J. Michálek
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Working Conditions ◽  
Enamel Coating ◽  
Soil Moisture Content ◽  
Soil Bulk Density ◽  
Soil Conditions ◽  
Red Clay ◽  
Power Requirement ◽  
Mouldboard Plough

The power requirement of tillage implements is an important design consideration particularly for animal-drawn implements where the power is limited. The paper presents the possibility of reduction in the draught requirements of animal-drawn mouldboard plough by using enamel coating on the soil-engaged components such as the mouldboard, share and the landside. Trials were conducted to compare enamel-coated Maun Series single mouldboard plough (manufactured by Zimplow Limited, Bulawayo,Zimbabwe) with similar uncoated plough, both animal-drawn, under comparable working conditions. Experiments were done at 25% and 32% d.b. soil moisture content on a red clay soil inZimbabwe. The parameters measured in evaluating the draught performance of both ploughs were the tractive effort (pull), speed of ploughing, depth and width of ploughing, and soil conditions (i.e. soil moisture content, soil bulk density and soil penetration resistance). It was found that for similar working conditions the enamel coating reduced the specific draught by 20 to 26% depending upon soil moisture content.

Analysis on Soil Moisture Content in the Middle Reaches of the Yellow River

2011 ◽  
Vol 28 (1) ◽  
pp. 85-91 ◽  
Author(s):  
Run-chun LI ◽  
Xiu-zhi ZHANG ◽  
Li-hua WANG ◽  
Xin-yan LV ◽  
Yuan GAO
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Yellow River ◽  
The Yellow River

Distribution of soil moisture content and its effect on the potential growth of the over-story species in North-East Chalkidiki

2001 ◽  
Vol 66 ◽  
Author(s):  
M. Aslanidou ◽  
P. Smiris
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Soil Moisture Content ◽  
Soil Depth ◽  
Moisture Distribution ◽  
Taxus Baccata ◽  
Mixed Stands ◽  
Potential Growth ◽  
North East ◽  
Soil Moisture Distribution

This  study deals with the soil moisture distribution and its effect on the  potential growth and    adaptation of the over-story species in north-east Chalkidiki. These  species are: Quercus    dalechampii Ten, Quercus  conferta Kit, Quercus  pubescens Willd, Castanea  sativa Mill, Fagus    moesiaca Maly-Domin and also Taxus baccata L. in mixed stands  with Fagus moesiaca.    Samples of soil, 1-2 kg per 20cm depth, were taken and the moisture content  of each sample    was measured in order to determine soil moisture distribution and its  contribution to the growth    of the forest species. The most important results are: i) available water  is influenced by the soil    depth. During the summer, at a soil depth of 10 cm a significant  restriction was observed. ii) the    large duration of the dry period in the deep soil layers has less adverse  effect on stands growth than in the case of the soil surface layers, due to the fact that the root system mainly spreads out    at a soil depth of 40 cm iii) in the beginning of the growing season, the  soil moisture content is    greater than 30 % at a soil depth of 60 cm, in beech and mixed beech-yew  stands, is 10-15 % in    the Q. pubescens  stands and it's more than 30 % at a soil depth of 60 cm in Q. dalechampii    stands.

scholarly journals Mapping barrier island soil moisture using a radiative transfer model of hyperspectral imagery from an unmanned aerial system

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rehman S. Eon ◽  
Charles M. Bachmann
Keyword(s):  
Soil Moisture ◽  
Radiative Transfer ◽  
Moisture Content ◽  
Layer Thickness ◽  
Soil Moisture Content ◽  
Hyperspectral Imagery ◽  
Barrier Island ◽  
Water Layer ◽  
Radiative Transfer Model ◽  
Transfer Model

AbstractThe advent of remote sensing from unmanned aerial systems (UAS) has opened the door to more affordable and effective methods of imaging and mapping of surface geophysical properties with many important applications in areas such as coastal zone management, ecology, agriculture, and defense. We describe a study to validate and improve soil moisture content retrieval and mapping from hyperspectral imagery collected by a UAS system. Our approach uses a recently developed model known as the multilayer radiative transfer model of soil reflectance (MARMIT). MARMIT partitions contributions due to water and the sediment surface into equivalent but separate layers and describes these layers using an equivalent slab model formalism. The model water layer thickness along with the fraction of wet surface become parameters that must be optimized in a calibration step, with extinction due to water absorption being applied in the model based on equivalent water layer thickness, while transmission and reflection coefficients follow the Fresnel formalism. In this work, we evaluate the model in both field settings, using UAS hyperspectral imagery, and laboratory settings, using hyperspectral spectra obtained with a goniometer. Sediment samples obtained from four different field sites representing disparate environmental settings comprised the laboratory analysis while field validation used hyperspectral UAS imagery and coordinated ground truth obtained on a barrier island shore during field campaigns in 2018 and 2019. Analysis of the most significant wavelengths for retrieval indicate a number of different wavelengths in the short-wave infra-red (SWIR) that provide accurate fits to measured soil moisture content in the laboratory with normalized root mean square error (NRMSE)< 0.145, while independent evaluation from sequestered test data from the hyperspectral UAS imagery obtained during the field campaign obtained an average NRMSE = 0.169 and median NRMSE = 0.152 in a bootstrap analysis.

scholarly journals Estimating Agricultural Soil Moisture Content through UAV-Based Hyperspectral Images in the Arid Region

2021 ◽  
Vol 13 (8) ◽  
pp. 1562
Author(s):  
Xiangyu Ge ◽  
Jianli Ding ◽  
Xiuliang Jin ◽  
Jingzhe Wang ◽  
Xiangyue Chen ◽  
...  
Keyword(s):  
Data Mining ◽  
Soil Moisture ◽  
Moisture Content ◽  
Hyperspectral Imaging ◽  
Fractional Order ◽  
Arid Regions ◽  
Soil Moisture Content ◽  
Order Derivative ◽  
Imaging Data ◽  
Strategy I

Unmanned aerial vehicle (UAV)-based hyperspectral remote sensing is an important monitoring technology for the soil moisture content (SMC) of agroecological systems in arid regions. This technology develops precision farming and agricultural informatization. However, hyperspectral data are generally used in data mining. In this study, UAV-based hyperspectral imaging data with a resolution o 4 cm and totaling 70 soil samples (0–10 cm) were collected from farmland (2.5 × 104 m2) near Fukang City, Xinjiang Uygur Autonomous Region, China. Four estimation strategies were tested: the original image (strategy I), first- and second-order derivative methods (strategy II), the fractional-order derivative (FOD) technique (strategy III), and the optimal fractional order combined with the optimal multiband indices (strategy IV). These strategies were based on the eXtreme Gradient Boost (XGBoost) algorithm, with the aim of building the best estimation model for agricultural SMC in arid regions. The results demonstrated that FOD technology could effectively mine information (with an absolute maximum correlation coefficient of 0.768). By comparison, strategy IV yielded the best estimates out of the methods tested (R2val = 0.921, RMSEP = 1.943, and RPD = 2.736) for the SMC. The model derived from the order of 0.4 within strategy IV worked relatively well among the different derivative methods (strategy I, II, and III). In conclusion, the combination of FOD technology and the optimal multiband indices generated a highly accurate model within the XGBoost algorithm for SMC estimation. This research provided a promising data mining approach for UAV-based hyperspectral imaging data.

scholarly journals A GNSS-IR Method for Retrieving Soil Moisture Content from Integrated Multi-Satellite Data That Accounts for the Impact of Vegetation Moisture Content

2021 ◽  
Vol 13 (13) ◽  
pp. 2442
Author(s):  
Jichao Lv ◽  
Rui Zhang ◽  
Jinsheng Tu ◽  
Mingjie Liao ◽  
Jiatai Pang ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Satellite Data ◽  
Vegetation Index ◽  
Soil Moisture Content ◽  
Support Vector ◽  
Observation Data ◽  
Multipath Effect ◽  
Mars Model ◽  
The Impact

There are two problems with using global navigation satellite system-interferometric reflectometry (GNSS-IR) to retrieve the soil moisture content (SMC) from single-satellite data: the difference between the reflection regions, and the difficulty in circumventing the impact of seasonal vegetation growth on reflected microwave signals. This study presents a multivariate adaptive regression spline (MARS) SMC retrieval model based on integrated multi-satellite data on the impact of the vegetation moisture content (VMC). The normalized microwave reflection index (NMRI) calculated with the multipath effect is mapped to the normalized difference vegetation index (NDVI) to estimate and eliminate the impact of VMC. A MARS model for retrieving the SMC from multi-satellite data is established based on the phase shift. To examine its reliability, the MARS model was compared with a multiple linear regression (MLR) model, a backpropagation neural network (BPNN) model, and a support vector regression (SVR) model in terms of the retrieval accuracy with time-series observation data collected at a typical station. The MARS model proposed in this study effectively retrieved the SMC, with a correlation coefficient (R2) of 0.916 and a root-mean-square error (RMSE) of 0.021 cm3/cm3. The elimination of the vegetation impact led to 3.7%, 13.9%, 11.7%, and 16.6% increases in R2 and 31.3%, 79.7%, 49.0%, and 90.5% decreases in the RMSE for the SMC retrieved by the MLR, BPNN, SVR, and MARS model, respectively. The results demonstrated the feasibility of correcting the vegetation changes based on the multipath effect and the reliability of the MARS model in retrieving the SMC.

Multi-algorithm comparison to predict soil organic matter and soil moisture content from cell phone images

Geoderma ◽  
2021 ◽  
Vol 385 ◽  
pp. 114863
Author(s):  
Perry Taneja ◽  
Hitesh Kumar Vasava ◽  
Prasad Daggupati ◽  
Asim Biswas
Keyword(s):  
Organic Matter ◽  
Soil Moisture ◽  
Soil Organic Matter ◽  
Moisture Content ◽  
Cell Phone ◽  
Soil Moisture Content ◽  
Algorithm Comparison
Sign in / Sign up

Export Citation Format

Share Document