Dissimilar friction stir welding of aluminum alloys reinforced with carbon nanotubes

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
D.I. Pantelis ◽  
P.N. Karakizis ◽  
D.A. Dragatogiannis ◽  
C.A. Charitidis
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Friction Stir Welding ◽  
Welding Process ◽  
Travel Speed ◽  
Matrix Composites ◽  
Friction Stir ◽  
Reinforcing Fillers ◽  
Dissimilar Friction Stir Welding ◽  
The Impact

This chapter is devoted to studying the possibility of incorporating carbon nanotubes (CNTs) as reinforcing fillers in dissimilar metal matrices joints produced by friction stir welding (FSW), as well as the impact of this incorporation on the microstructural and mechanical properties of these joints. Carbon nanotubes are extensively used as a reinforcing material in nanocomposites, due to their high stiffness and strength. FSW is a solid-state welding process of joining aluminum and other metallic alloys and has been employed in the aerospace, rail, automotive, and marine industries. Recently, friction stir processing (FSP), a derivative method of FSW, has been employed as an alternative for the production of metal matrix composites (MMCs). In this work, the process parameters were optimized in order to achieve nondefective welds, with and without the addition of CNTs. Two main cases were studied: (1) FSP was optimized by changing the tool rotational and travel speed as well as the number and direction of FSW passes, and (2) a Taguchi design scheme was adopted to further investigate the FSP in relevance to three factors (number, direction of passes, and tool rotational speed). Mechanical behavior was studied, and the local mechanical properties of the produced MMCs were compared with their bulk counterparts and parent materials. More specifically, the measured mechanical properties in the micro- and nanoscale (namely hardness and elastic modulus) are correlated with the microstructure and the presence of fillers.

Features of structure formation processes in AA2024 alloy joints formed by the friction stir welding with bobbin tool

2021 ◽  
Vol 23 (2) ◽  
pp. 98-115
Author(s):  
Alexey Ivanov ◽  
◽  
Valery Rubtsov ◽  
Andrey Chumaevskii ◽  
Kseniya Osipovich ◽  
...  
Keyword(s):  
Friction Stir Welding ◽  
Structure Formation ◽  
Welded Joints ◽  
Heat Input ◽  
Welded Joint ◽  
Welding Process ◽  
Tool Material ◽  
Travel Speed ◽  
Material System ◽  
Friction Stir

Introduction. One of friction stir welding types is the bobbin friction stir welding (BFSW) process, which allows to obtain welded joints in various configurations without using a substrate and axial embedding force, as well as to reduce heat loss and temperature gradient across the welded material thickness. This makes the BFSW process effective for welding aluminum alloys, which properties are determined by their structural-phase state. According to research data, the temperature and strain rate of the welded material have some value intervals in which strong defect-free joints are formed. At the same time, much less attention has been paid to the mechanisms of structure formation in the BFSW process. Therefore, to solve the problem of obtaining defect-free and strong welded joints by BFSW, an extended understanding of the basic mechanisms of structure formation in the welding process is required. The aim of this work is to research the mechanisms of structure formation in welded joint of AA2024 alloy obtained by bobbin tool friction stir welding with variation of the welding speed. Results and discussion. Weld formation conditions during BFSW process are determined by heat input into a welded material, its fragmentation and plastic flow around the welding tool, which depend on the ratio of tool rotation speed and tool travel speed. Mechanisms of joint formation are based on a combination of equally important processes of adhesive interaction in “tool-material” system and extrusion of metal into the region behind the welding tool. Combined with heat dissipation conditions and the configuration of the “tool-material” system, this leads to material extrusion from a welded joint and its decompaction. This results in formation of extended defects. Increasing in tool travel speed reduce the specific heat input, but in case of extended joints welding an amount of heat released in joint increases because of specific heat removal conditions. As a result, the conditions of adhesion interaction and extrusion processes change, which leads either to the growth of existing defects or to the formation of new ones. Taking into account the complexity of mechanisms of structure formation in joint obtained by BFSW, an obtaining of defect-free joints implies a necessary usage of various nondestructive testing methods in combination with an adaptive control of technological parameters directly in course of a welding process.

scholarly journals The Effects of In-Process Cooling during Friction Stir Welding of 7475 Aluminium Alloy

2021 ◽  
Vol 50 (9) ◽  
pp. 2743-2754
Author(s):  
Ashish Jacob ◽  
Sachin Maheshwari ◽  
Arshad Noor Siddiquee ◽  
Abdulrahman Al-Ahmari ◽  
Mustufa Haider Abidi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Welded Joints ◽  
Positive Impact ◽  
Welding Process ◽  
Fusion Welding ◽  
Friction Stir ◽  
Cooling Conditions ◽  
Zero Degree ◽  
Welding Technique

Certain age hardenable alloys such as AA7475 cannot be joined with perfection using fusion welding techniques. This requires non-conventional welding technique such as friction stir welding process to join these ‘difficult to weld’ alloys. In this study, three different cooling conditions i.e. cryogenic, sub-zero, and zero-degree Celsius temperature conditions have been analyzed to understand its impact on the welding process. In-process cooling was found to behave effectively and also enhanced the mechanical properties of the welded joints. A stable microstructure was clearly seen in the images observed under the metallurgical microscope. The weld efficiencies were found to be good in each of the samples which are indicative of a strong metallic joint. The effective cooling conditions employed had an overall positive impact on the joint.

scholarly journals Effect of FSW Traverse Speed on Mechanical Properties of Copper Plate Joints

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1937 ◽  
Author(s):  
Tomasz Machniewicz ◽  
Przemysław Nosal ◽  
Adam Korbel ◽  
Marek Hebda
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Rolling Direction ◽  
Base Material ◽  
Traverse Speed ◽  
Travel Speed ◽  
Fatigue Tests ◽  
Copper Plate ◽  
Friction Stir ◽  
Microstructural Evaluation

The paper describes the influence of the friction stir welding travel speed on the mechanical properties of the butt joints of copper plates. The results of static and fatigue tests of the base material (Cu-ETP R220) and welded specimens produced at various travel speeds were compared, considering a loading applied both parallel and perpendicularly to the rolling direction of the plates. The mechanical properties of the FSW joints were evaluated with respect to parameters of plates’ material in the delivery state and after recrystallisation annealing. The strength parameters of friction stir welding joints were compared with the data on tungsten inert gas welded joints of copper plates available in the literature. The results of microhardness tests and fractographic analysis of tested joints are also presented. Based on the above test results, it was shown that although in the whole range of considered traverse speeds (from 40 to 80 mm/min), comparable properties were obtained for FSW copper joints in terms of their visual and microstructural evaluation, their static and especially fatigue parameters were different, most apparent in the nine-fold greater observed average fatigue life. The fatigue tests turned out to be more sensitive criteria for evaluation of the FSW joints’ qualities.

Sign in / Sign up

Export Citation Format

Share Document