Measuring lower limb circumference and volume – introduction of a novel optical 3D volumetric measurement system

2020 ◽  
Vol 65 (2) ◽  
pp. 237-241
Author(s):  
Thomas Tischer ◽  
Sebastian Oye ◽  
Andreas Wolf ◽  
Frank Feldhege ◽  
Robert Jacksteit ◽  
...  
Keyword(s):  
Measurement System ◽  
Lower Limb ◽  
Three Dimensional ◽  
3D Models ◽  
Clinical Applications ◽  
Surface Topology ◽  
Measurement Tool ◽  
Volumetric Measurement ◽  
Lower Range ◽  
Very High

AbstractThis study comprised two experiments: (1) the reliability of a novel optical three-dimensional (3D) volumetric measurement system (BODYTRONIC® 600) for the assessment of lower limb circumference and volume; (2) the comparison of data obtained from BODYTRONIC® 600 with that provided by computed tomography (CT) for accuracy estimation. Reliability was assessed in 20 healthy subjects. Accuracy was determined by comparing the deviations in the surface topology of two 3D models obtained from BODYTRONIC® 600 and CT. Reliability was very high for leg circumference measures [coefficient of variations (CVs) range 0.3%–1.3%] and slightly lower for foot circumference (CVs around 2.0%). Reliability of leg volume was also found to be very high (CVs ≤ 2.5%). Differences in surface topology between BODYTRONIC® 600 and CT were primarily below 1 mm indicating high accuracy. The volumes of the foot were higher (range 0.9%–1.7%) and that of the leg, lower (range 1.0%–1.3%) compared to CT. The BODYTRONIC® 600 system provides fast, highly reliable and accurate measures of lower limb circumference and volume and can be considered as a valuable measurement tool for use in various research and clinical applications.

scholarly journals Delivering and using 3D models on the web: are we ready?

2017 ◽  
Vol 8 (17) ◽  
pp. 1 ◽  
Author(s):  
Roberto Scopigno ◽  
Marco Callieri ◽  
Matteo Dellepiane ◽  
Federico Ponchio ◽  
Marco Potenziani
Keyword(s):  
Three Dimensional ◽  
3D Models ◽  
Main Channel ◽  
High Quality ◽  
Specific Domain ◽  
Web Based ◽  
3D Data ◽  
Very High ◽  
Web Publishing ◽  
The Web

<p class="VARKeywords">Digital technologies are now mature for producing high quality digital replicas of Cultural Heritage (CH) assets. The research results produced in the last decade ignited an impressive evolution and consolidation of the technologies for acquiring high-quality digital three-dimensional (3D) models, encompassing both geometry and color. What remains still an open problem is how to deliver those data and related knowledge to our society. The web is nowadays the main channel for the dissemination of knowledge. Emerging commercial solutions for web-publishing of 3D data are consolidating and becoming a de-facto standard for many applications (e-commerce, industrial products, education, etc.). In this framework, CH is a very specific domain, requiring highly flexible solutions. Some recent experiences are presented, aimed at providing a support to the archival of archaeological 3D data, supporting web-based publishing of very high-resolution digitization results and finally enabling the documentation of complex restoration actions. All those examples have been recently implemented on the open-source 3D Heritage Online Presenter (3DHOP) platform, developed at CNR-ISTI.</p>

A Three-dimensional Camera: Development and Applications of a Three-dimensional Image Measurement System

2011 ◽  
Vol 131 (2) ◽  
pp. 320-328 ◽  
Author(s):  
Cunwei Lu ◽  
Hiroya Kamitomo ◽  
Ke Sun ◽  
Kazuhiro Tsujino ◽  
Genki Cho
Keyword(s):  
Measurement System ◽  
Three Dimensional ◽  
Image Measurement ◽  
Dimensional Image

Three-dimensional fault geometry and kinematics of the 2008 M 7.1 Yutian earthquake revealed by very-high resolution satellite stereo imagery

2019 ◽  
Vol 232 ◽  
pp. 111300
Author(s):  
Xiaogang Song ◽  
Nana Han ◽  
Xinjian Shan ◽  
Chisheng Wang ◽  
Yingfeng Zhang ◽  
...  
Keyword(s):  
High Resolution ◽  
Three Dimensional ◽  
Fault Geometry ◽  
Stereo Imagery ◽  
Very High ◽  
Geometry And Kinematics

scholarly journals Shell-crossing in a ΛCDM Universe

2020 ◽  
Vol 501 (1) ◽  
pp. L71-L75
Author(s):  
Cornelius Rampf ◽  
Oliver Hahn
Keyword(s):  
Dark Matter ◽  
Perturbation Theory ◽  
Large Scale ◽  
Cold Dark Matter ◽  
Three Dimensional ◽  
Random Initial Data ◽  
Recursion Relations ◽  
Indispensable Tool ◽  
First Time ◽  
Very High

ABSTRACT Perturbation theory is an indispensable tool for studying the cosmic large-scale structure, and establishing its limits is therefore of utmost importance. One crucial limitation of perturbation theory is shell-crossing, which is the instance when cold-dark-matter trajectories intersect for the first time. We investigate Lagrangian perturbation theory (LPT) at very high orders in the vicinity of the first shell-crossing for random initial data in a realistic three-dimensional Universe. For this, we have numerically implemented the all-order recursion relations for the matter trajectories, from which the convergence of the LPT series at shell-crossing is established. Convergence studies performed at large orders reveal the nature of the convergence-limiting singularities. These singularities are not the well-known density singularities at shell-crossing but occur at later times when LPT already ceased to provide physically meaningful results.

scholarly journals Structured-light 3D scanning of exhibited historical clothing—a first-ever methodical trial and its results

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Jerzy Montusiewicz ◽  
Marek Miłosz ◽  
Jacek Kęsik ◽  
Kamil Żyła
Keyword(s):  
Cultural Heritage ◽  
Information Technologies ◽  
Structured Light ◽  
Three Dimensional ◽  
3D Models ◽  
3D Scanning ◽  
Dimensional Representation ◽  
3D Scanner ◽  
Three Dimensional Representation ◽  
3D Scanners

AbstractHistorical costumes are part of cultural heritage. Unlike architectural monuments, they are very fragile, which exacerbates the problems of their protection and popularisation. A big help in this can be the digitisation of their appearance, preferably using modern techniques of three-dimensional representation (3D). The article presents the results of the search for examples and methodologies of implementing 3D scanning of exhibited historical clothes as well as the attendant problems. From a review of scientific literature it turns out that so far practically no one in the world has made any methodical attempts at scanning historical clothes using structured-light 3D scanners (SLS) and developing an appropriate methodology. The vast majority of methods for creating 3D models of clothes used photogrammetry and 3D modelling software. Therefore, an innovative approach was proposed to the problem of creating 3D models of exhibited historical clothes through their digitalisation by means of a 3D scanner using structural light technology. A proposal for the methodology of this process and concrete examples of its implementation and results are presented. The problems related to the scanning of 3D historical clothes are also described, as well as a proposal how to solve them or minimise their impact. The implementation of the methodology is presented on the example of scanning elements of the Emir of Bukhara's costume (Uzbekistan) from the end of the nineteenth century, consisting of the gown, turban and shoes. Moreover, the way of using 3D models and information technologies to popularise cultural heritage in the space of digital resources is also discussed.

scholarly journals Comparative Analysis of Digital Models of Objects of Cultural Heritage Obtained by the “3D SLS” and “SfM” Methods

2021 ◽  
Vol 11 (12) ◽  
pp. 5321
Author(s):  
Marcin Barszcz ◽  
Jerzy Montusiewicz ◽  
Magdalena Paśnikowska-Łukaszuk ◽  
Anna Sałamacha
Keyword(s):  
Cultural Heritage ◽  
Low Cost ◽  
Three Dimensional ◽  
3D Models ◽  
Silk Road ◽  
Digital Models ◽  
Global Pandemic ◽  
University Of Technology ◽  
Three Dimensional Models ◽  
3D Digitisation

In the era of the global pandemic caused by the COVID-19 virus, 3D digitisation of selected museum artefacts is becoming more and more frequent practice, but the vast majority is performed by specialised teams. The paper presents the results of comparative studies of 3D digital models of the same museum artefacts from the Silk Road area generated by two completely different technologies: Structure from Motion (SfM)—a method belonging to the so-called low-cost technologies—and by Structured-light 3D Scanning (3D SLS). Moreover, procedural differences in data acquisition and their processing to generate three-dimensional models are presented. Models built using a point cloud were created from data collected in the Afrasiyab museum in Samarkand (Uzbekistan) during “The 1st Scientific Expedition of the Lublin University of Technology to Central Asia” in 2017. Photos for creating 3D models in SfM technology were taken during a virtual expedition carried out under the “3D Digital Silk Road” program in 2021. The obtained results show that the quality of the 3D models generated with SfM differs from the models from the technology (3D SLS), but they may be placed in the galleries of the vitrual museum. The obtained models from SfM do not have information about their size, which means that they are not fully suitable for archiving purposes of cultural heritage, unlike the models from SLS.

scholarly journals Combining 3D Structured Light Imaging and Spine X-ray Data Improves Visualization of the Spinous Lines in the Scoliotic Spine

2020 ◽  
Vol 11 (1) ◽  
pp. 301
Author(s):  
Sławomir Paśko ◽  
Wojciech Glinkowski
Keyword(s):  
Radiation Exposure ◽  
Surface Topography ◽  
Structured Light ◽  
Spinous Process ◽  
Three Dimensional ◽  
Diagnostic System ◽  
Measurement Tool ◽  
Adequate Treatment ◽  
X Ray ◽  
Spinous Processes

Scoliosis is a three-dimensional trunk and spinal deformity. Patient evaluation is essential for the decision-making process and determines the selection of specific and adequate treatment. The diagnosis requires a radiological evaluation that exposes patients to radiation. This exposure reaches hazardous levels when numerous, repetitive radiographic studies are required for diagnostics, monitoring, and treatment. Technological improvements in radiographic devices have significantly reduced radiation exposure, but the risk for patients remains. Optical three-dimensional surface topography (3D ST) measurement systems that use surface topography (ST) to screen, diagnose, and monitor scoliosis are safer alternatives to radiography. The study aimed to show that the combination of plain X-ray and 3D ST scans allows for an approximate presentation of the vertebral column spinous processes line in space to determine the shape of the spine’s deformity in scoliosis patients. Twelve patients diagnosed with scoliosis, aged 13.1 ± 4.5 years (range: 9 to 20 years) (mean: Cobb angle 17.8°, SD: ±9.5°) were enrolled in the study. Patients were diagnosed using full-spine X-ray and whole torso 3D ST. The novel three-dimensional assessment of the spinous process lines by merging 3D ST and X-ray data in patients with scoliosis was implemented. The method’s expected uncertainty is less than 5 mm, which is better than the norm for a standard measurement tool. The presented accuracy level is considered adequate; the proposed solution is accurate enough to monitor the changes in the shape of scoliosis’s spinous processes line. The proposed method allows for a relatively precise calculation of the spinous process lines based on a three-dimensional point cloud obtained with a four-directional, three-dimensional structured light diagnostic system and a single X-ray image. The method may help reduce patients’ total radiation exposure and avoid one X-ray in the sagittal projection if biplanar radiograms are required for reconstructing the three-dimensional line of the spinous processes line.

scholarly journals 3D-Volume Rendering of the Pelvis with Emphasis on Paraurethral Structures Based on MRI Scans and Comparisons between 3D Slicer and OsiriX®

2021 ◽  
Vol 45 (3) ◽  
Author(s):  
C. M. Durnea ◽  
S. Siddiqi ◽  
D. Nazarian ◽  
G. Munneke ◽  
P. M. Sedgwick ◽  
...  
Keyword(s):  
Image Processing ◽  
Secondary Analysis ◽  
Three Dimensional ◽  
3D Models ◽  
Clinical Role ◽  
Cross Sectional ◽  
3D Slicer ◽  
Mri Scans ◽  
3D Volume ◽  
Good Agreement

AbstractThe feasibility of rendering three dimensional (3D) pelvic models of vaginal, urethral and paraurethral lesions from 2D MRI has been demonstrated previously. To quantitatively compare 3D models using two different image processing applications: 3D Slicer and OsiriX. Secondary analysis and processing of five MRI scan based image sets from female patients aged 29–43 years old with vaginal or paraurethral lesions. Cross sectional image sets were used to create 3D models of the pelvic structures with 3D Slicer and OsiriX image processing applications. The linear dimensions of the models created using the two different methods were compared using Bland-Altman plots. The comparisons demonstrated good agreement between measurements from the two applications. The two data sets obtained from different image processing methods demonstrated good agreement. Both 3D Slicer and OsiriX can be used interchangeably and produce almost similar results. The clinical role of this investigation modality remains to be further evaluated.

scholarly journals Improving 3D-3D facial registration methods: potential role of three-dimensional models in personal identification of the living

2021 ◽  
Author(s):  
Daniele Gibelli ◽  
Andrea Palamenghi ◽  
Pasquale Poppa ◽  
Chiarella Sforza ◽  
Cristina Cattaneo ◽  
...  
Keyword(s):  
Three Dimensional ◽  
3D Models ◽  
Personal Identification ◽  
Surveillance Systems ◽  
3D Registration ◽  
Three Dimensional Models ◽  
Point To Point ◽  
Point Distance ◽  
Male Subjects

AbstractPersonal identification of the living from video surveillance systems usually involves 2D images. However, the potentiality of three-dimensional facial models in gaining personal identification through 3D-3D comparison still needs to be verified. This study aims at testing the reliability of a protocol for 3D-3D registration of facial models, potentially useful for personal identification. Fifty male subjects aged between 18 and 45 years were randomly chosen from a database of 3D facial models acquired through stereophotogrammetry. For each subject, two acquisitions were available; the 3D models of faces were then registered onto other models belonging to the same and different individuals according to the least point-to-point distance on the entire facial surface, for a total of 50 matches and 50 mismatches. RMS value (root mean square) of point-to-point distance between the two models was then calculated through the VAM® software. Intra- and inter-observer errors were assessed through calculation of relative technical error of measurement (rTEM). Possible statistically significant differences between matches and mismatches were assessed through Mann–Whitney test (p < 0.05). Both for intra- and inter-observer repeatability rTEM was between 2.2 and 5.2%. Average RMS point-to-point distance was 0.50 ± 0.28 mm in matches, 2.62 ± 0.56 mm in mismatches (p < 0.01). An RMS threshold of 1.50 mm could distinguish matches and mismatches in 100% of cases. This study provides an improvement to existing 3D-3D superimposition methods and confirms the great advantages which may derive to personal identification of the living from 3D facial analysis.

Sign in / Sign up

Export Citation Format

Share Document