Shear Behavior of Large Concrete Beams Reinforced with High-Strength Steel

2008 ◽  
Vol 105 (2) ◽  
Keyword(s):  
High Strength Steel ◽  
Concrete Beams ◽  
High Strength ◽  
Shear Behavior

Bond Characteristics and Shear Behavior of Concrete Beams Reinforced with High-Strength Steel Reinforcement

2012 ◽  
Vol 15 (2) ◽  
pp. 303-318 ◽  
Author(s):  
Tarek K. Hassan ◽  
Ahmed Mantawy ◽  
Judy Soliman ◽  
Ali Sherif ◽  
Sami H. Rizkalla
Keyword(s):  
High Strength Steel ◽  
Concrete Beams ◽  
High Strength ◽  
Shear Behavior ◽  
Steel Reinforcement ◽  
Bond Characteristics

scholarly journals Experimental Study and Reliability Analysis of Flexural Capacity of RC Beams Reinforced with 600 MPa Grade Steel

2020 ◽  
Vol 2020 ◽  
pp. 1-26
Author(s):  
Xianhua Yao ◽  
Yulong Zhang ◽  
Junfeng Guan ◽  
Lielie Li ◽  
Haichao Liu ◽  
...  
Keyword(s):  
Yield Strength ◽  
Reliability Analysis ◽  
High Strength Steel ◽  
Concrete Beams ◽  
Concrete Strength ◽  
High Strength ◽  
Flexural Capacity ◽  
Steel Bars ◽  
Design Values ◽  
Grade Steel

Flexural capacity of beams reinforced with 400 or 500 MPa grade steel can be accurately estimated by using equations provided in design codes. Recently, 600 MPa grade steel has evolved in the construction industry, and the applicability of existing equations for this grade of steel should be verified by performing experimental investigation. By conducting tests on concrete beams reinforced with 600 MPa grade high-strength steel, this study investigates the flexural performance for different concrete strength grades and different reinforcement ratios. Flexural capacities of concrete beams reinforced with 400 MPa, 500 MPa, and 600 MPa grade steel are analyzed based on equations in various codes and based on experimental studies in the literature. Furthermore, this study performs reliability analysis and verifies the three design values of 600 MPa grade steel yield strength in relation to the experimental performance and recommends the appropriate design values of 600 MPa grade steel yield strength. Research results show that when the measured values of yield strength of the steel bars and concrete strength are used, the ratio of the measured failure moment value to the calculated value for various beams based on different codes is nearly 1.0, demonstrating the high degree of fitting. Finally, the reliability analysis shows that the design yield strength of the 600 MPa grade high-strength steel bars should be taken as 520 MPa.

Sign in / Sign up

Export Citation Format

Share Document