scholarly journals Experimental investigation of the effect of water and temperature on mechanical properties of rocks

2016 ◽  
Author(s):  
Chun Ling Lau
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Effect Of Water

Effect of Water Vapor/Hydrogen Environments on Niobium, B-66 Niobium Alloy, Tantalum, and Ta-10W Alloy

CORROSION ◽  
1991 ◽  
Vol 47 (4) ◽  
pp. 272-280
Author(s):  
R. J. Walter ◽  
G. G. Bentle ◽  
W. T. Chandler
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Water Vapor ◽  
Complex Function ◽  
Tensile Tests ◽  
Niobium Alloy ◽  
Hydrogen Environment ◽  
Hydrogen Mixture ◽  
Effect Of Water

Abstract The results of an experimental investigation of the effect of water vapor/hydrogen environments on the mechanical properties of niobium, B-66 niobium alloy, tantalum, and Ta-10W alloy are presented. Tensile tests were conducted on specimens of these materials in water vapor/hydrogen environments with water vapor/hydrogen mixture ratios of 1 and 3. The water vapor/hydrogen environment caused strength reductions on tantalum and Ta—WW and ductility reductions on all four materials. The degree and causes of embrittlement were a complex function of temperature.

Effects of particle sizes, wood to cement ratio and chemical additives on the properties of sesendok (Endospermum Diadenum) cement-bonded particleboard

2010 ◽  
Vol 7 (2) ◽  
pp. 57
Author(s):  
Jamaludin Kasim ◽  
Shaikh Abdul Karim Yamani ◽  
Ahmad Firdaus Mat Hedzir ◽  
Ahmad Syafiq Badrul Hisham ◽  
Mohd Arif Fikri Mohamad Adnan
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Cement Content ◽  
Particle Sizes ◽  
Thickness Swelling ◽  
Chemical Additives ◽  
Board Density ◽  
Cement Ratio ◽  
Aluminium Silicate ◽  
Cement Board

An experimental investigation was performed to evaluate the properties of cement-bonded particleboard made from Sesendok wood. The target board density was set at a standard 1200 kg m". The effect offarticle size, wood to cement ratio and the addition ofsodium silicate and aluminium silicate on the wood cement board properties has been evaluated. A change ofparticle size from 1.0 mm to 2.0 mm has a significant effect on the mechanical properties, however the physical properties deteriorate. Increasing the wood to cement ratio from 1:2.25 to 1:3 decreases the modulus ofrupture (MOR) by 11% and the addition ofsodium silicate improves valuesfurther by about 28% compared to the addition ofaluminum silicate. The modulus ofelasticity (MOE) in general increases with increasing cement content, but is not significantly affected by the addition ofsodium silicate or aluminium silicate, although the addition of their mixture (sodium silicate andaluminium silicate) consistentlyyields greater MOE values. Water absorption and thickness swelling is significantly affected by the inclusion ofadditives and better values are attained using higher wood to cement ratios.

scholarly journals Effect of Water Flow on Underwater Wet Welded A36 Steel

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 682
Author(s):  
Eko Surojo ◽  
Aziz Harya Gumilang ◽  
Triyono Triyono ◽  
Aditya Rio Prabowo ◽  
Eko Prasetya Budiana ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Flow ◽  
Flow Rate ◽  
Water Flow Rate ◽  
Physical And Mechanical Properties ◽  
Shielded Metal Arc Welding ◽  
Effect Of Water ◽  
Bending Effect ◽  
Metal Arc Welding ◽  
A36 Steel

Underwater wet welding (UWW) combined with the shielded metal arc welding (SMAW) method has proven to be an effective way of permanently joining metals that can be performed in water. This research was conducted to determine the effect of water flow rate on the physical and mechanical properties (tensile, hardness, toughness, and bending effect) of underwater welded bead on A36 steel plate. The control variables used were a welding speed of 4 mm/s, a current of 120 A, electrode E7018 with a diameter of 4 mm, and freshwater. The results show that variations in water flow affected defects, microstructure, and mechanical properties of underwater welds. These defects include spatter, porosity, and undercut, which occur in all underwater welding results. The presence of flow and an increased flow rate causes differences in the microstructure, increased porosity on the weld metal, and undercut on the UWW specimen. An increase in water flow rate causes the acicular ferrite microstructure to appear greater, and the heat-affected zone (HAZ) will form finer grains. The best mechanical properties are achieved by welding with the highest flow rate, with a tensile strength of 534.1 MPa, 3.6% elongation, a Vickers microhardness in the HAZ area of 424 HV, and an impact strength of 1.47 J/mm2.

Experimental investigation of mechanical properties of GLARE composite with different layup sequences

2021 ◽  
Author(s):  
I. Annamalai ◽  
K. Karthik ◽  
Nitheesh Kumar ◽  
S. Muthuselvan ◽  
M. Vignesh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation

Experimental Investigation and Micro-Structural Evolution Analysis of CNT & Fly Ash Reinforced Aluminium Matrix Composites

2015 ◽  
Vol 830-831 ◽  
pp. 429-432 ◽  
Author(s):  
Udaya ◽  
Peter Fernandes
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Fly Ash ◽  
Ball Milling ◽  
Milling Time ◽  
Structural Evolution ◽  
Matrix Composites ◽  
Evolution Analysis ◽  
Ball Milling Time ◽  
Al Matrix

The paper illustrates Carbon nanotubes reinforced pure Al (CNT/Al) composites and fly ash reinforced pure Al (FA/Al) composites produced by ball-milling and sintering. Microstructures of the fabricated composite were examined and the mechanical properties of the composites were tested and analysed. It was indicated that the CNTs and fly ash were uniformly dispersed into the Al matrix as ball-milling time increased with increase in hardness.

Sign in / Sign up

Export Citation Format

Share Document