Concurrent three-dimensional characterization of the refractive-index and residual-stress distributions in optical fibers

2012 ◽  
Vol 51 (22) ◽  
pp. 5442 ◽  
Author(s):  
Michael R. Hutsel ◽  
Thomas K. Gaylord
Keyword(s):  
Residual Stress ◽  
Refractive Index ◽  
Optical Fibers ◽  
Three Dimensional ◽  
Stress Distributions

Residual Stress Prediction for Non-Axisymmetric Vessel Penetration Welds

2008 ◽  
Author(s):  
Kazuo Ogawa ◽  
Nobuyoshi Yanagida ◽  
Koichi Saito
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Three Dimensional ◽  
Measurement Data ◽  
Fe Model ◽  
Stress Distributions ◽  
Dimensional Finite Element ◽  
Stress Prediction ◽  
Three Dimensional Finite Element ◽  
Good Agreement

Residual stress distribution in an oblique nozzle jointed to a vessel with J-groove welds was analyzed using a three-dimensional finite element method. All welding passes were considered in a 180-degree finite element (FE) model with symmetry. Temperature and stress were modeled for simultaneous bead laying. To determine residual stress distributions at the welds experimentally, a mock-up specimen was manufactured. The analytical results show good agreement with the experimental measurement data, indicating that FE modeling is valid.

A Three-Dimensional Finite Element Evaluation of a Destructive Experimental Method for Determining Through-Thickness Residual Stresses in Girth Welded Pipes

1986 ◽  
Vol 108 (2) ◽  
pp. 99-106 ◽  
Author(s):  
E. F. Rybicki ◽  
J. R. Shadley
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Experimental Method ◽  
Three Dimensional ◽  
Element Model ◽  
Stress Distributions ◽  
Reference Stress ◽  
Improvement Process ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

The accuracy of a destructive, experimental method for the evaluation of through-thickness residual stress distributions is investigated. The application of the method is to a welded pipe that has been subjected to a residual stress improvement process. The residual stress improvement process introduces gradients in the stress distribution. The question of interest is how well the back-computation method used to interpret the experimental data represents the residual stress distribution for this type of stress profile. To address this question, a finite element model was used to provide a reference stress solution for comparison with the back-computation results of the experimental method. Three-dimensional finite element stress analyses were also conducted to simulate the cutting steps of the destructive laboratory procedure. The residual stress distributions obtained by the back-computation procedure were then compared with the reference stress solutions provided by the finite element model. The comparisons show agreement and indicate that good results can be expected from the experimental method when it is applied to a pipe that has been subjected to a residual stress improvement process, provided that the axial gradient of stress is not too large.

scholarly journals Finite element modelling of multi-pass fusion welding with application to complex geometries

2007 ◽  
Vol 221 (4) ◽  
pp. 225-234 ◽  
Author(s):  
W Jiang ◽  
K Yahiaoui
Keyword(s):  
Residual Stress ◽  
Three Dimensional ◽  
Welding Process ◽  
Industrial Applications ◽  
Fusion Welding ◽  
Modelling Technique ◽  
Welding Parameters ◽  
Complex Geometries ◽  
Stress Distributions ◽  
Element Removal

The current paper presents recently completed work in the development of advanced multi-pass weld modelling procedures, with the ultimate objective of predicting weld residual stress distributions in thick-walled complex geometries. The modelling technique was first developed using simple three-dimensional geometries, for which experimental data was available for validation purposes. All the non-linearities associated with welding, including geometry, material, and boundary non-linearities, as well as heat source movement were taken into account. The element removal/reactivate technique was employed to simulate the deposition of filler material. Combined with a newly developed meshing technique, the model was then applied to predict residual stress distributions for a relatively thick stainless steel piping branch junction. Finally, a parametric study was conducted to assess the effects of various manufacture-related welding parameters on the final residual stress fields. The interpass temperature and cooling rate were found to be the two most sensitive parameters affecting resultant residual stresses. The residual stress profiles can be optimized relatively easily by adjusting these parameters. This research demonstrated that the developed modelling technique has potential in multi-pass welding process optimization and wide industrial applications including weld repairs.

Residual stress characterization of a fabrication weld from the VICTORIA-Class submarine pressure hull: revealing the Unseen Special issue on Neutron Scattering in Canada.

2010 ◽  
Vol 88 (10) ◽  
pp. 759-770 ◽  
Author(s):  
R. J. McGregor ◽  
R. B. Rogge
Keyword(s):  
Residual Stress ◽  
Neutron Diffraction ◽  
Three Dimensional ◽  
Base Material ◽  
National Research Council ◽  
Fatigue And Fracture ◽  
Operational Envelope ◽  
Rare Opportunity ◽  
Complementary Study

Explicit understanding of the residual-stress character of primary submarine pressure hull weldments will improve the fidelity of numerical analysis and experimentation supporting operational envelope and design life. A length of circumferential-seam closure weld was contained within a section of hull plate removed from the HMCS VICTORIA during the extended docking work period (EDWP) refit operations. This has provided a rare opportunity for detailed characterization of the as-received condition of this common weld-type from original vessel assembly. In collaboration with the Canadian Neutron Beam Centre of the National Research Council (NRC), a program was conducted to study this weld using neutron diffraction. Neutron diffraction is able to survey nondestructively through the section thickness, providing a three-dimensional characterization, while leaving the specimen intact for complementary study by other methods. Results indicate tensile stress peaks of up to 80% of the base-material yield stress. Understanding the three-dimensional behaviour of residual stress in this type of weld provides a valuable resource to the numerical modelling community. The results can also support fatigue and fracture experimental work and serve to confirm and improve the interpretation of the existing body of “surface-only” work conducted on similar welds.

Joint Residual Stress/Refractive Index Characterization of Large-Mode-Area Erbium-Doped Fibers

2013 ◽  
Vol 31 (14) ◽  
pp. 2426-2433 ◽  
Author(s):  
Ting Feng ◽  
M. H. Jenkins ◽  
Fengping Yan ◽  
T. K. Gaylord
Keyword(s):  
Residual Stress ◽  
Refractive Index ◽  
Large Mode Area ◽  
Erbium Doped ◽  
Doped Fibers ◽  
Mode Area

scholarly journals Finite Element Prediction of Residual Stress Distributions in a Multipass Welded Piping Branch Junction

2006 ◽  
Vol 129 (4) ◽  
pp. 601-608 ◽  
Author(s):  
Wei Jiang ◽  
Kadda Yahiaoui
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Residual Stresses ◽  
Three Dimensional ◽  
Pressure Vessels ◽  
Welding Residual Stress ◽  
Stress Distributions ◽  
Multipass Welding ◽  
Hexahedral Elements ◽  
Element Removal

Piping branch junctions and nozzle attachments to main pressure vessels are common engineering components used in the power, oil and gas, and shipbuilding industries amongst others. These components are usually fabricated by multipass welding. The latter process is known to induce residual stresses at the fabrication stage, which can have severe adverse effects on the in-service behavior of such critical components. It is thus desirable if the distributions of residual stresses can be predicted well in advance of welding execution. This paper presents a comprehensive study of three dimensional residual stress distributions in a stainless steel tee branch junction during a multipass welding process. A full three dimensional thermomechanical finite element model has been developed for this purpose. A newly developed meshing technique has been used to model the complex intersection areas of the welded junction with all hexahedral elements. Element removal/reactivate technique has been employed to simulate the deposition of filler material. Material, geometry, and boundary nonlinearities associated with welding were all taken into account. The analysis results are presented in the form of stress distributions circumferentially along the weld line on both run and branch pipes as well as at the run and branch cross sections. In general, this computational model is capable of predicting three dimensional through-thickness welding residual stress, which can be valuable for structural integrity assessments of complex welded geometries.

Sign in / Sign up

Export Citation Format

Share Document