scholarly journals Acoustic Properties of Sound Absorber from Modified Polyester with Filler Sodium Bicarbonate

2018 ◽  
Vol 34 (4) ◽  
pp. 2187-2191
Author(s):  
Nasmi Herlina Sari ◽  
Jauhar Fajrin
Keyword(s):  
Absorption Coefficient ◽  
Sodium Bicarbonate ◽  
Acoustic Impedance ◽  
Sound Absorption ◽  
Polyester Resin ◽  
Acoustic Properties ◽  
Acoustic Parameters ◽  
Absorbent Material ◽  
Sound Absorber ◽  
Absorption Performance

The combination of low price, ease of manufacturing and waterproofing characteristics has placed polyester resin as a potential sound absorbent material. Previous studies showed that adding filler material to the blending may increase the acoustics properties of a sound absorbent material. This study aims to investigate the potential of sodium bicarbonate (NaHCO3) to be employed as a filler to improve the acoustic properties of the sound absorber made of polyester resin. Two important acoustic parameters were carefully assessed; absorption coefficient and acoustic impedance. The results showed that the sound absorption performance increased significantly at low and medium frequencies in the presence of NaHCO3 filler in polyester resin. Meanwhile, the use of a back cavity on the absorbent material reduced the sound absorption performance of materials at low and medium frequencies. This suggests that sound absorber made of polyester with sodium bicarbonate filler may be used as an alternative for sound absorber materials.

Analysis of Absorption Coefficient for Eco-Friendly Acoustical Absorbers

2013 ◽  
Vol 831 ◽  
pp. 58-61
Author(s):  
Jun Oh Yeon ◽  
Kyoung Woo Kim
Keyword(s):  
Absorption Coefficient ◽  
Noise Reduction ◽  
Sound Absorption ◽  
Glass Wool ◽  
Absorption Coefficients ◽  
Sound Absorber ◽  
Reduction Coefficient ◽  
Absorption Performance ◽  
Rock Wool

Primarily used for domestic buildings as a sound absorber are glass wool, rock wool, etc. These absorbers as well as waste absorber created by recycling wastes, PP+PET fiber absorber made from polypropylene and polyester, wood wool board bonded with finely sliced roots of trees and foamed aluminum absorber are recyclable eco-friendly absorbers that are constantly being developed. In this study, we compared the sound absorption performance of currently used absorbers and eco-friendly building absorbers. As a result, the NRC (Noise Reduction Coefficient) was found to be 0.85 for glass wool, 0.95 for rock wool, and 0.70 for polyester, 0.65 for waste absorber, 0.75 for PET+ PP fiber absorber, 0.40 for wood wool board, and 0.75 for foamed aluminum absorber. Based on the results of these absorption coefficients, we expect the usability of the absorbers continues to increase as future eco-friendly building absorbers.

scholarly journals Investigation of Acoustic Properties on Wideband Sound-Absorber Composed of Hollow Perforated Spherical Structure with Extended Tubes and Porous Materials

2020 ◽  
Vol 10 (24) ◽  
pp. 8978
Author(s):  
Dengke Li ◽  
Zhongcheng Jiang ◽  
Lin Li ◽  
Xiaobo Liu ◽  
Xianfeng Wang ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Three Dimensional ◽  
Low Frequency ◽  
Acoustic Properties ◽  
Low Frequencies ◽  
Frequency Sound ◽  
Sound Absorber ◽  
Spherical Structure ◽  
Absorption Performance ◽  
Melamine Foam

Traditional porous media such as melamine foam absorb sound due to their three-dimensional porous struts. However, the acoustic properties at low frequencies are greatly related to its thickness. In this paper, a novel type of thin and lightweight sound absorber composed of melamine foam and hollow perforated spherical structure with extended tubes (HPSET) is introduced to enhance the sound absorption performance at low frequencies. A theoretical model for the normal absorption coefficient of the HPSET with melamine foam is established. Good agreements are observed between the simulated and the experimental results. Compared with the virgin melamine foam, the proposed absorber can greatly improve the low-frequency sound absorption and retain the mid- to high-frequency sound absorption, while the thickness of the proposed absorber is less than 1/28 of the wavelength.

Preliminary Study on Bamboo as Sound Absorber

2014 ◽  
Vol 554 ◽  
pp. 76-80 ◽  
Author(s):  
Fazlin A. Khair ◽  
Azma Putra ◽  
Mohd Jailani Mohd Nor ◽  
Nurul Atiqah ◽  
M.Z. Selamat
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Hollow Structure ◽  
Chemical Substance ◽  
The Body ◽  
Natural Material ◽  
Sound Absorber ◽  
Tube Test ◽  
Average Absorption Coefficient ◽  
Preliminary Study

Synthetic acoustic materials are known for their poisonous chemical substance to the environment and also the particles which are harmful to human health. Research is now directed towards finding an alternative acoustic absorber made from natural materials. This paper presents the utilization of bamboo, a natural material having hollow structure to act as sound absorber. In an impedance tube test, the hollow path is arranged to face the sound incidence. The result reveals that bamboo having length of 2 cm has average absorption coefficient of 0.95 at frequency above 3 kHz. Performance at lower frequencies can be controlled by adding the air gap behind the system. Introduction of microholes along the body shows no significant effect to increase the sound absorption.

scholarly journals Sound Absorption Performance of Sugar Palm Trunk Fibers

2019 ◽  
Vol 130 ◽  
pp. 01003
Author(s):  
Anditya Endar Prabowo ◽  
Kuncoro Diharjo ◽  
Ubaidillah ◽  
Iwan Prasetiyo
Keyword(s):  
Absorption Coefficient ◽  
Bulk Density ◽  
Sound Absorption ◽  
Random Noise ◽  
Air Gap ◽  
Sound Absorption Coefficient ◽  
Low Frequencies ◽  
Central Java ◽  
Absorption Performance ◽  
Small Medium Enterprises

The purpose of this research is to investigate the effect of bulk density, thickness, and air gap to sound absorption performance on absorber based sugar palm trunk fibers. The fibers were obtained from solid waste on Small-Medium Enterprises of sago flour processing in Klaten, Central Java, Indonesia. The absorber specimens were formed from the fibers using a simple press molding in an oven at 150 °C. According to ISO 10534-2, the absorber samples were tested using two microphones impedance tube with random noise source to get the curve of the sound absorption coefficient. The result shows that the absorption performance can be improved by increasing bulk density and increasing of sample thickness. Especially at low frequencies, improvement of the sound absorption coefficient can be achieved (NAC > 0.8) by applying the air gap behind the sample. The best performance of absorber based sugar palm trunk fiber can be achieved for (1 000 to 6 000) Hz range frequency.

scholarly journals The Effects of Various Additive Components on the Sound Absorption Performances of Polyurethane Foams

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Shuming Chen ◽  
Yang Jiang ◽  
Jing Chen ◽  
Dengfeng Wang
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Polyurethane Foams ◽  
Acoustic Properties ◽  
Acoustic Absorption ◽  
Absorption Properties ◽  
Maximum Enhancement ◽  
Flexible Polyurethane ◽  
Pu Foams

Flexible polyurethane (PU) foams comprising various additive components were synthesized to improve their acoustic performances. The purpose of this study was to investigate the effects of various additive components of the PU foams on the resultant sound absorption, which was characterized by the impedance tube technique to obtain the incident sound absorption coefficient and transmission loss. The maximum enhancement in the acoustic properties of the foams was obtained by adding fluorine-dichloroethane (141b) and triethanolamine. The results showed that the acoustic absorption properties of the PU foams were improved by adding 141b and triethanolamine and depended on the amount of the water, 141b, and triethanolamine.

Application of In Situ Method for Measuring Sound Absorption Coefficient of Direct Piercing Carved Wood Panel with Daun sireh Motif

2013 ◽  
Vol 471 ◽  
pp. 273-278
Author(s):  
Mohd Zamri Bin Jusoh ◽  
Mohamad Ngasri Dimon ◽  
Nazli Bin Che Din ◽  
Toru Otsuru ◽  
You Kok Yeow
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Sound Absorption Coefficient ◽  
Wood Panel ◽  
Natural Sunlight ◽  
Absorption Performance ◽  
Air Circulation ◽  
Lower Frequencies

An application of In-Situ method of measuring sound absorption coefficient on the surface of direct piercing carved wood panel using the concept of ensemble averaged is discussed. The method offer an easier way to measure the absorption performance for each individual aperture of carved wood panel with floral pattern which was replicated from one of the oldest mosque, namely Masjid Abidin located in Terengganu, Malaysia. Two pieces of 20 mm thick of cengal wood (Neobalanocarpus heimii) with 30% and 40% perforation ratio were respectively measured in a reverberation room in order to determine the value of . At lower frequencies (0.1 kHz-1.5 kHz), the measured values of for both direct piercing carved wood panel with floral pattern (Daun Sireh motif) are shown that the sound absoption for both direct piercing carved wood panel are in perform level. From the measurements, clearly, the installation of the direct piercing carved wood panel with floral pattern (Daun Sireh motif) in the Masjid Abidin can provide better air circulation and additional natural sunlight, as well as better sound intelligibility inside the building.

scholarly journals Effect of Thickness and Perforation Size on the Acoustic Absorption Performance of a Micro-Perforated Panel

2021 ◽  
Vol 335 ◽  
pp. 03016
Author(s):  
Yi-San Wong ◽  
Vignesh Sekar ◽  
Se Yong Eh Noum ◽  
Sivakumar Sivanesan
Keyword(s):  
Absorption Coefficient ◽  
Urban Areas ◽  
Sound Absorption ◽  
Rapid Development ◽  
Noise Pollution ◽  
Sound Absorption Coefficient ◽  
Sound Insulation ◽  
Acoustic Absorption ◽  
Psychological Disturbance ◽  
Absorption Performance

In current times, noise pollution is especially apparent in urban areas due to rapid development in transportation, industrialization, and urbanization. The worsening noise pollution is detrimental to human health and behaviour as it can contribute to disorders and psychological disturbance. Thus, noise regulation is crucial and must be addressed with immediate effect. Micro-perforated panels (MPP) can be a potential solution to mitigate noise on a commercial scale. Researchers have addressed the mechanics behind the enhancement of acoustic absorption through micro-perforation and some suggestions have been made, such as the effect of structural variation on sound absorption performance. Hence, this research aims at optimizing the sound absorption performance of an MPP by determining the connection between thickness and perforation size with sound absorption coefficient. Three cases were considered: (i) varying perforation size, (ii) varying thickness, and (iii) varying perforation size and thickness simultaneously. Based on the Maa prediction model, the sound absorption performance for all three cases have been simulated through the MATLAB software. Results show that the increase in both thickness and perforation size together increases the peak value of sound absorption coefficient (SAC). It also shifts the peak towards the higher frequency region and narrows the bandwidth. The findings of this study indicate the potential of thick MPPs as commercial sound absorbers by adjusting the size of perforations. Thicker and sturdier MPPs with optimal acoustic resistance and reactance can act as reliable sound absorbers for sound insulation purposes.

scholarly journals Acoustic Properties of 316L Stainless Steel Hollow Sphere Composites Fabricated by Pressure Casting

Metals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1047
Author(s):  
Chunhe Wang ◽  
Fengchun Jiang ◽  
Shuaiqi Shao ◽  
Tianmiao Yu ◽  
Chunhuan Guo
Keyword(s):  
Absorption Coefficient ◽  
Hollow Sphere ◽  
Sound Absorption ◽  
Random Distribution ◽  
Transmission Loss ◽  
Acoustic Properties ◽  
Sound Absorption Coefficient ◽  
Pressure Casting ◽  
Sound Transmission Loss ◽  
At Resonance

In this study, we prepared metal hollow sphere composites (MHSCs) using metal hollow spheres (MHSs) by pressure casting under vacuum conditions, and investigated the acoustic properties. The density of the MHSCs was measured using the mass to volume ratio, the microstructure of the MHSCs was observed using a scanning electron microscope, and the acoustic properties of the MHSCs were tested using an impedance tube. The measured MHSCs showed that the densities of the MHSCs with the random distribution of MHSs with diameter ~3.28 mm (1.74 g/cm3 to 1.77 g/cm3) (MHSC-3.28) were nearly equal to that of the MHSCs with the random distribution of MHSs with diameter ~5.76 mm (1.74 g/cm3 to 1.76 g/cm3) (MHSC-5.76), and lower than that of the MHSCs with the layered structure of MHSs with diameter ~3.28 mm (1.93 g/cm3 to 1.97 g/cm3) (MHSC-LS). Microstructural observations confirmed that the interface region between the MHSs and matrix demonstrated a simple physical combination pattern with pores. The acoustic properties of the MHSCs showed that the sound absorption coefficient of MHSC-LS was lower than that of MHSC-3.28 and higher than that of MHSC-5.76 at off-resonance. The sound absorption coefficient peak value of MHSC-3.28 was higher than that of MHSC-LS, and lower than that of MHSC-5.76 at resonance. The sound transmission loss of MHSC-3.28 was lower than that of MHSC-5.76, which shows the rules are independent from the resonance. The sound transmission loss of MHSC-LS was higher than that of MHSC-5.76 at resonance, but lower than that of MHSC-3.28 at off-resonance. In addition, we discuss the propagation mechanism of the sound waves in the MHSC, which is mainly determined by the distribution of the MHSs in the MHSC.

scholarly journals Building Sound Absorption Performance Model of Porous Glass Based on GRNN

2019 ◽  
Vol 37 (1) ◽  
pp. 57-62 ◽  
Author(s):  
Xubo Zhang ◽  
Ying Xu ◽  
Tingying Zhang ◽  
Guodong Li
Keyword(s):  
Absorption Coefficient ◽  
Porous Glass ◽  
Sound Absorption ◽  
Performance Model ◽  
Sound Absorption Coefficient ◽  
Average Error ◽  
Generalized Regression Neural Network ◽  
Prediction Curve ◽  
Absorption Performance ◽  
Two Parameters

The generalized regression neural network (GRNN) model of sound absorption coefficient of porous glass was built on data from 16 groups gained by experiments, where 12 groups were randomly selected as trained samples and the other 4 groups were as tested ones. This GRNN model which has two parameters, porosity and thickness as the inputs, was set the maximum iteration number 20, getting the optimal trained spread parameter σ=0.1. The results showed that the average error of this model was 0.003, and this model has high precision and the prediction curve of the sound absorption coefficient was very similar to the experiments. The advantages of this method are simple, needing less trained samples, rapid and accurate.

Sign in / Sign up

Export Citation Format

Share Document