scholarly journals The Effects of Various Additive Components on the Sound Absorption Performances of Polyurethane Foams

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Shuming Chen ◽  
Yang Jiang ◽  
Jing Chen ◽  
Dengfeng Wang
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Polyurethane Foams ◽  
Acoustic Properties ◽  
Acoustic Absorption ◽  
Absorption Properties ◽  
Maximum Enhancement ◽  
Flexible Polyurethane ◽  
Pu Foams

Flexible polyurethane (PU) foams comprising various additive components were synthesized to improve their acoustic performances. The purpose of this study was to investigate the effects of various additive components of the PU foams on the resultant sound absorption, which was characterized by the impedance tube technique to obtain the incident sound absorption coefficient and transmission loss. The maximum enhancement in the acoustic properties of the foams was obtained by adding fluorine-dichloroethane (141b) and triethanolamine. The results showed that the acoustic absorption properties of the PU foams were improved by adding 141b and triethanolamine and depended on the amount of the water, 141b, and triethanolamine.

scholarly journals Vibration Damping and Acoustic Behavior of PU-Filled Non-Stochastic Aluminum Cellular Solids

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 725
Author(s):  
Vitor Hugo Carneiro ◽  
Hélder Puga ◽  
José Meireles
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Polyurethane Foams ◽  
Vibration Damping ◽  
Acoustic Properties ◽  
Sound Absorption Coefficient ◽  
Cellular Solids ◽  
Infiltration Process ◽  
Wide Range

Aluminum-based cellular solids are promising lightweight structural materials considering their high specific strength and vibration damping, being potential candidates for future railway vehicles with enhanced riding comfort and low fuel consumption. The filling of these lattices with polymer-based (i.e., polyurethane) foams may further improve the overall vibration/noise-damping without significantly increasing their density. This study explores the dynamic (i.e., frequency response) and acoustic properties of unfilled and polyurethane-filled aluminum cellular solids to characterize their behavior and explore their benefits in terms of vibration and noise-damping. It is shown that polyurethane filling can increase the vibration damping and transmission loss, especially if the infiltration process uses flexible foams. Considering sound reflection, however, it is shown that polyurethane filled samples (0.27–0.30 at 300 Hz) tend to display lower values of sound absorption coefficient relatively to unfilled samples (0.75 at 600 Hz), is this attributed to a reduction in overall porosity, tortuosity and flow resistivity. Foam-filled samples (43–44 dB at 700–1200 Hz) were shown to be more suitable to reduce sound transmission rather than reflection than unfilled samples (21 dB at 700 Hz). It was shown that the morphology of these cellular solids might be optimized depending on the desired application: (i) unfilled aluminum cellular solids are appropriate to mitigate internal noises due to their high sound absorption coefficient; and (ii) PU filled cellular solids are appropriate to prevent exterior noises and vibration damping due to their high transmission loss in a wide range of frequencies and vibration damping.

scholarly journals Acoustic Properties of 316L Stainless Steel Hollow Sphere Composites Fabricated by Pressure Casting

Metals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1047
Author(s):  
Chunhe Wang ◽  
Fengchun Jiang ◽  
Shuaiqi Shao ◽  
Tianmiao Yu ◽  
Chunhuan Guo
Keyword(s):  
Absorption Coefficient ◽  
Hollow Sphere ◽  
Sound Absorption ◽  
Random Distribution ◽  
Transmission Loss ◽  
Acoustic Properties ◽  
Sound Absorption Coefficient ◽  
Pressure Casting ◽  
Sound Transmission Loss ◽  
At Resonance

In this study, we prepared metal hollow sphere composites (MHSCs) using metal hollow spheres (MHSs) by pressure casting under vacuum conditions, and investigated the acoustic properties. The density of the MHSCs was measured using the mass to volume ratio, the microstructure of the MHSCs was observed using a scanning electron microscope, and the acoustic properties of the MHSCs were tested using an impedance tube. The measured MHSCs showed that the densities of the MHSCs with the random distribution of MHSs with diameter ~3.28 mm (1.74 g/cm3 to 1.77 g/cm3) (MHSC-3.28) were nearly equal to that of the MHSCs with the random distribution of MHSs with diameter ~5.76 mm (1.74 g/cm3 to 1.76 g/cm3) (MHSC-5.76), and lower than that of the MHSCs with the layered structure of MHSs with diameter ~3.28 mm (1.93 g/cm3 to 1.97 g/cm3) (MHSC-LS). Microstructural observations confirmed that the interface region between the MHSs and matrix demonstrated a simple physical combination pattern with pores. The acoustic properties of the MHSCs showed that the sound absorption coefficient of MHSC-LS was lower than that of MHSC-3.28 and higher than that of MHSC-5.76 at off-resonance. The sound absorption coefficient peak value of MHSC-3.28 was higher than that of MHSC-LS, and lower than that of MHSC-5.76 at resonance. The sound transmission loss of MHSC-3.28 was lower than that of MHSC-5.76, which shows the rules are independent from the resonance. The sound transmission loss of MHSC-LS was higher than that of MHSC-5.76 at resonance, but lower than that of MHSC-3.28 at off-resonance. In addition, we discuss the propagation mechanism of the sound waves in the MHSC, which is mainly determined by the distribution of the MHSs in the MHSC.

scholarly journals Development of Impedance Tube to Measure Sound Absorption Coefficient

2019 ◽  
Vol 8 (6) ◽  
pp. 3218-3222
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Acoustic Property ◽  
Small Sample ◽  
Textile Material ◽  
Acoustic Properties ◽  
Sound Absorption Coefficient ◽  
Impedance Tube ◽  
Significant Difference

An acoustic property of textile material can be measured using an impedance tube, is the most popular technique to measure normal sound absorption and transmission loss. This method consuming less time and a very small sample is required to assess the acoustic properties of the materials. Unfortunately, the cost of the impedance tube and software used for measurement is very high. This paper gives information about how to develop a cost-effective impedance tube suitable for researchers. The design, development, and fabrication of the impedance tube suitable for different frequencies with technical details are present here. Information related to some software which can be used to measure sound absorption coefficient also provided. To validate the testing results obtained from custom-build impedance tube, same samples were tested on commercially available impedance tube at PSG College, Coimbatore. It was observed that both the instruments provide almost same results, no statistically significant difference found in results. Base on the results design of customized impedance tube recommends to student and researcher interested in measuring acoustic properties of textile material

scholarly journals Vibration damping and acoustic characteristics of sisal fibre–reinforced polypropylene composite

2018 ◽  
Vol 50 (1) ◽  
pp. 13-21 ◽  
Author(s):  
Yashwant S Munde ◽  
Ravindra B Ingle ◽  
I Siva
Keyword(s):  
Absorption Coefficient ◽  
Natural Frequency ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Experimental Results ◽  
Acoustic Properties ◽  
Sound Absorption Coefficient ◽  
Polypropylene Composite ◽  
Acoustic Characteristics ◽  
Sisal Fibre

Natural fibre composites attract industries because of their low density, low cost and the specific mechanical properties they possess in comparison to synthetic fibres. In this work, the randomly oriented sisal fibre–reinforced polypropylene composites are fabricated using extrusion–injection moulding technique. The aim of this study is to experimentally investigate the effect of fibre weight fraction (0%–30% in step of 10%) on vibrational damping and acoustic characteristics. The impulse hammer excitation technique is used to evaluate the free vibrational characteristics, namely, natural frequency and damping. An impedance tube is used in evaluating the acoustic properties, namely, sound absorption coefficient and transmission loss. Experimental results reveal that increase in fibre loading significantly alter the vibrational and acoustic response of the polypropylene composite. Modal analysis shows that incorporation of sisal fibres by 30 wt.% to polypropylene made the natural frequency superior when compared with other compositions. However, damping becomes worse with higher fibre content. In case of acoustic properties, incorporation of fibres at higher fraction enhances the sound absorption coefficient and transmission loss. Experimental results drive the research in development of such new materials system towards the application of vibration and sound diminutions.

scholarly journals Sound Absorption Properties of Perforated Recycled Polyurethane Foams Reinforced with Woven Fabric

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 401
Author(s):  
Roberto Atiénzar-Navarro ◽  
Romina del Rey ◽  
Jesús Alba ◽  
Víctor J. Sánchez-Morcillo ◽  
Rubén Picó
Keyword(s):  
Sound Absorption ◽  
Polyurethane Foams ◽  
Acoustic Properties ◽  
Woven Fabric ◽  
Acoustic Response ◽  
Perforation Rate ◽  
Absorption Properties ◽  
Textile Fabrics ◽  
Membrane Type

The acoustic properties of recycled polyurethane foams are well known. Such foams are used as a part of acoustic solutions in different fields such as building or transport. This paper aims to seek improvements in the sound absorption of these recycled foams when they are combined with fabrics. For this aim, foams have been drilled with cylindrical perforations, and also combined with different fabrics. The effect on the sound absorption is evaluated based on the following key parameters: perforation rate (5% and 20%), aperture size (4 mm and 6 mm), and a complete perforation depth. Experimental measurements were performed by using an impedance tube for the characterization of its acoustic behavior. Sound absorption of perforated samples is also studied—numerically by finite element simulations, where the viscothermal losses were considered; and analytically by using models for the perforated foam and the fabric. Two textile fabrics were used in combination with perforated polyurethane samples. Results evidence a modification of the sound absorption at mid frequencies employing fabrics that have a membrane-type acoustic response.

Investigation of the acoustic properties of needle punched nonwoven produced of blend with sustainable fibers

2018 ◽  
Vol 30 (3) ◽  
pp. 444-458 ◽  
Author(s):  
Shariful Islam ◽  
Shaikh Md. Mominul Alam
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Natural Fibers ◽  
Sound Transmission ◽  
Textile Composites ◽  
Acoustic Properties ◽  
Textile Composite ◽  
Content Type ◽  
Hemp Fibers

Purpose The purpose of this paper is to investigate the acoustic properties of needle-punched nonwovens produced of bamboo, banana and hemp fibers blended with polyester (PET) and polypropylene (PP) as they are supportive enough to minimize sound transmission inside the automobiles. Design/methodology/approach Textile materials like bamboo, banana and hemp blended with PET and PP in the ratio of 35:35:30 were applied to make the web. The needle-punching technique was applied to each web for three times to form a full nonwoven textile composite. The concept of PET/PP blend with natural fibers was to enhance the consistency and thermoform propensity of the composites. When nonwoven textile composites were placed in between a sound source and a receiver, they absorbed annoying sound by dissolving sound wave energy. Sound absorption coefficient was measured by the impedance tube method as per ASTM C384 Standard. Bamboo/PET/PP composite showed the highest absorption coefficient in most of the frequencies. Findings Physical and comfort properties were tested for the composites and it was noticed that bamboo/PET/PP composites with its compressed structure showed a better stiffness value, lesser thermal conductivity, lesser air permeability, better absorption coefficient and highest sound transmission loss compared to other two composites. At 840 Hz, the absorption coefficient of bamboo/PET/PP remained in satisfactory level but it was inferior by 20 percent in banana/PET/PP. Conversely at more frequencies like 1,680 Hz, there was a decrease from the target level in all the nonwovens composites, which could be enhanced by raising the thickness of the nonwovens, and all these properties of bamboo/PET/PP were considered appropriate for controlling noise inside the vehicles. Practical implications This research will provide facilities to decrease noise inside the vehicles. It will improve the apparent value of the automobiles to the traveler and also provide a sensible goodwill to the manufacturer. Originality/value This research will open several ways for the development of different nonwoven composites, particularly for the sound absorption and will open possible ways for the scholars to further study in this field.

Improving Sound Absorption Property of Polyurethane Foams by Adding Tea-Leaf Fibers

2012 ◽  
Vol 37 (4) ◽  
pp. 515-520 ◽  
Author(s):  
Bülent Ekici ◽  
Aykut Kentli ◽  
Haluk Küçük
Keyword(s):  
Polyurethane Foam ◽  
Sound Absorption ◽  
Significant Contribution ◽  
Polyurethane Foams ◽  
Absorption Property ◽  
Luffa Cylindrica ◽  
Absorption Properties ◽  
Environmental Friendly ◽  
Tea Leaf ◽  
Pu Foams

Abstract The sound absorption property of polyurethane (PU) foams loaded with natural tea-leaf fibers and luffa cylindrica (LC) has been studied. The results show a significant improvement in the sound absorption property parallel to an increase in the amount of tea-leaf fibers (TLF). Using luffa-cylindrica as a filler material improves sound absorption properties of soft foam at all frequency ranges. Moreover, an increase in the thickness of the sample resulted in an improvement of the sound absorption property. It is pleasing to see that adding tea-leaf fibers and luffa-cylindrica to the polyurethane foam demonstrate a significant contribution to sound absorption properties of the material and it encourages using environmental friendly products as sound absorption material in further studies.

scholarly journals Acoustic Panels Made of Paper Sludge and Clay Composites

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Core Material ◽  
Paper Sludge ◽  
Frequency Range ◽  
Absorption Properties ◽  
Air Gaps ◽  
The Core

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).

Sign in / Sign up

Export Citation Format

Share Document