Ciliary band formation in the doliolaria larva of Florometra

Development ◽  
1986 ◽  
Vol 96 (1) ◽  
pp. 303-323
Author(s):  
T. C. Lacalli ◽  
J. E. West
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Band Pattern ◽  
Ciliated Epithelium ◽  
Ciliary Band ◽  
Band Formation ◽  
Sequence Of Events ◽  
Transmission Electron ◽  
Direct Formation ◽  
Initial Pattern

The development of ciliary band pattern in the doliolaria larva of Florometra serratissima is described based on scanning and transmission electron microscopy. The uniformly ciliated epithelium of the post-hatching larva develops four regularly spaced bands over a period of approx. 20 h generating an epithelial pattern that is, essentially, a series of stripes. The first visible events of pattern formation progress over the larval surface in a posterior-to-anterior and dorsal-to-ventral sequence, but the initial pattern is not, in fact, striped. It instead consists of a close-packed array of oval interband domains separated and surrounded by belts of band cells. Secondarily the interband domains expand laterally and coalesce to form continuous, broad stripes, while the bands remain as narrow stripes between them. Two possible explanations for this unusual sequence of events are discussed: (1) that it can be understood in evolutionary terms with reference to band pattern in other echinoderm larvae, and (2) that it is a morphogenetic necessity because limitations inherent in the patterning mechanism prevent the direct formation of regular stripes.

Dipetalonema viteae: ultrastructural study on the in vitro interaction between rat macrophages and microfilariae in the presence of IgE antibody

Parasitology ◽  
1981 ◽  
Vol 82 (1) ◽  
pp. 55-62 ◽  
Author(s):  
M. A. Ouaissi ◽  
A. Haque ◽  
A. Capron
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ultrastructural Study ◽  
Peritoneal Macrophages ◽  
Immune Serum ◽  
Sequence Of Events ◽  
Transmission Electron ◽  
Dipetalonema Viteae ◽  
In Vitro Interaction

SUMMARYThe in vitro interaction between rat peritoneal macrophages and Dipetalonema viteae microfilariae in the presence of amicrofilaraemic rat immune serum was studied by transmission electron microscopy. The probable sequence of events leading to the killing of D. viteae microfilaria by macrophages is as follows. (a) Rat peritoneal macrophages in the presence of amicrofilaraemic rat immune serum adhere to the parasite surface, (b) the macrophages extend their pseudopodia around the parasite, (c) the ‘lysosome-like’ granules discharge their contents on to the parasite surface, (d) the lytic activity of these products begins at the parasite surface and (e) subsequent breaking of the microfilarial cuticle occurs, exposing the parasite intracellular material.

Papilla response of barley epidermal cells caused by Erysiphe graminis: rate and method of deposition determined by microcinematography and transmission electron microscopy

1979 ◽  
Vol 57 (8) ◽  
pp. 898-913 ◽  
Author(s):  
Richard J. Zeyen ◽  
W. R. Bushnel
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Amorphous Material ◽  
Time Lapse ◽  
Epidermal Cells ◽  
Erysiphe Graminis ◽  
Sequence Of Events ◽  
Transmission Electron ◽  
Wall Appositions ◽  
Entire Sequence

Papillae were deposited in barley epidermal cells directly beneath appressoria of Erysiphe graminis f. sp. hordei and appeared as hemispherical, internal wall appositions. The papilla response began shortly after the formation of a rapidly moving cytoplasmic aggregate beneath the appressorium. As documented in coleoptile tissue by time-lapse light microcinematography, the papillae grew rapidly for 20–30 min after becoming visible, their radii increasing by 0.1 μm/min. For small papillae, deposition continued for about 30 min; for larger papillae, deposition continued for 120–180 min. Results with transmission electron microscopy on leaf epidermal cells suggested that papilla deposition by host cytoplasmic aggregates can be divided into four sequential stages: (i) the deposition of osmiophilic (lipidic) materials, (ii) the deposition and partial compaction of nonosmiophilic, amorphous material (probably insoluble polysaccharides), (iii) compaction of nonosmiophilic, amorphous material, and (iv) the incorporation of osmiophilic material into the host wall and into the compacted nonosmiophilic, amorphous material. At maturity, the papillae are hardened, electron-opaque wall appositions that may be effective in preventing fungal penetration and development. Failure of papillae to prevent fungal penetration and development may be related to the inability of the epidermal cells to complete the entire sequence of events in papilla deposition before attempted fungal penetration.

A temperature-jump technique for time-resolved cryo-transmission Electron Microscopy

1989 ◽  
Vol 47 ◽  
pp. 742-743
Author(s):  
H. Chestnut ◽  
D. P. Siegel ◽  
J. L. Burns ◽  
Y. Talmon
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Liquid Crystalline ◽  
Temperature Jump ◽  
Specimen Preparation ◽  
Thin Specimen ◽  
Time Resolved ◽  
Sequence Of Events ◽  
Transmission Electron ◽  
Focused Beam

Transmission electron microscopy of rapidly-frozen, hydrated specimens (cryo-TEM) is a powerful way of examining labile microstructures. This technique avoids some artifacts associated with conventional preparative methods. Use of a controlled environment vitrification system (CEVS) for specimen preparation reduces the risk of unwanted sample changes due to evaporation, and permits the examination of specimens vitrified from a defined temperature. Studies of dynamic processes with time resolution on the order of seconds, in which the process was initiated by changes in sample pH, have been conducted. We now report the development of an optical method for increasing specimen temperature immediately before vitrification. Using our method, processes that are regulated by temperature can be initiated in less than 500 msec on the specimen grid. The ensuing events can then be captured by plunge-freezing within an additional 200 msec.Dimyristoylphosphatidylcholine (DMPC) liposomes, produced by extrusion, were used as test specimens. DMPC undergoes a gel/liquid crystalline transition at 24°C, inducing a change in liposome morphology from polyhedral to spherical. Five-μl aliquots of DMPC dispersions were placed on holey-carbon-filmed copper grids mounted in the CEVS environmental chamber, and maintained at 6-8°C and 80% relative humidity. Immediately before the temperature jump most of the sample was blotted away with filter paper, leaving a thin specimen film on the grid. Upon pressing the trigger, an electronic control circuit generated this timed sequence of events. First, a solenoid-activated shutter was opened to heat the specimen by exposing it for a variable time to the focused beam of a 75W Xenon arc lamp. Simultaneously, a solenoid-activated cryogen shutter in the bottom of the CEVS was opened. Next, the lamp shutter was closed after the desired heating interval. Finally, a solenoid-activated cable release was used to trigger a spring-loaded plunger in the CEVS, propelling the sample into a reservoir of liquid ethane. Vitrified samples were subsequently transferred to a Zeiss EM902 TEM, operated in zero-loss brightfield mode, for examination at −163°C.

scholarly journals Intestinal Lesions Induced in Gnotobiotic Calves by the Virus of Human Infantile Gastroenteritis

1977 ◽  
Vol 14 (3) ◽  
pp. 273-282 ◽  
Author(s):  
C. A. Mebus ◽  
R. G. Wyatt ◽  
A. Z. Kapikian
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Epithelial Cells ◽  
Lymphocytic Infiltration ◽  
Intestinal Histology ◽  
Squamous Cells ◽  
Sequence Of Events ◽  
Intestinal Lesions ◽  
Transmission Electron ◽  
Reticular Cells

Four gnotobiotic calves with intestinal lesions induced by third and fourth calf passages of the virus of human infantile gastroenteritis were studied by light microscopy, scanning and transmission electron microscopy, and by immunofluorescence. Calves, 25-72 hours old, were examined 0.5 hours, 3 hours, 7 hours, and 48 hours after the onset of diarrhea. Intestinal histology of infected calves was compared to that of two noninoculated gnotobiotic calves 48 and 72 hours old. The sequence of events in the small intestine was infection of the absorptive villous epithelial cells, replacement of the tall columnar villous epithelial cells with cuboidal and squamous cells, shortening of the villi, enlargement of reticular cells, lymphocytic infiltration of the villous lamina propria and repair.

Techniques for Transmission Electron Microscopy of Fiber-Matrix Interfaces in Aluminum Alloy-Boron Composites by Ion Erosio

1971 ◽  
Vol 29 ◽  
pp. 204-205
Author(s):  
G. G. Shaw
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Aluminum Alloy ◽  
Electron Beam ◽  
Pure Aluminum ◽  
Ion Milling ◽  
Transmission Electron ◽  
Fiber Matrix ◽  
Ion Erosion ◽  
Row Of Fibers

The morphology and composition of the fiber-matrix interface can best be studied by transmission electron microscopy and electron diffraction. For some composites satisfactory samples can be prepared by electropolishing. For others such as aluminum alloy-boron composites ion erosion is necessary.When one wishes to examine a specimen with the electron beam perpendicular to the fiber, preparation is as follows: A 1/8 in. disk is cut from the sample with a cylindrical tool by spark machining. Thin slices, 5 mils thick, containing one row of fibers, are then, spark-machined from the disk. After spark machining, the slice is carefully polished with diamond paste until the row of fibers is exposed on each side, as shown in Figure 1.In the case where examination is desired with the electron beam parallel to the fiber, preparation is as follows: Experimental composites are usually 50 mils or less in thickness so an auxiliary holder is necessary during ion milling and for easy transfer to the electron microscope. This holder is pure aluminum sheet, 3 mils thick.

Direct Observation of Heat Exchanger Deposits by Cross Sectioning

1967 ◽  
Vol 25 ◽  
pp. 364-365
Author(s):  
R. W. Anderson ◽  
D. L. Senecal
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heat Exchanger ◽  
Direct Observation ◽  
Cross Sections ◽  
Preparation Method ◽  
Specimen Preparation ◽  
Flowing Water ◽  
Transmission Electron ◽  
Deposit Layer

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Sign in / Sign up

Export Citation Format

Share Document