Deposition Processes

2016 ◽  
pp. 265-302
Keyword(s):  
Deposition Processes

Chemical and Electrochemical Heteroepitaxial Growth of Chalcogenide Semiconductors from Solutions

1996 ◽  
Vol 451 ◽  
Author(s):  
D. Lincot ◽  
M. J. Furlong ◽  
M. Froment ◽  
R. Cortes ◽  
M. C. Bernard
Keyword(s):  
Heteroepitaxial Growth ◽  
X Ray Diffraction ◽  
Basic Principles ◽  
Lattice Match ◽  
X Ray ◽  
Chalcogenide Semiconductors ◽  
Influence Of Temperature On ◽  
Deposition Processes ◽  
A Site ◽  
Site Selective

ABSTRACTChalcogenide semiconductors have been deposited epitaxially from aqueous solutions either chemically or electrochemically at growth rates of up to 0.7 μmhr−1. After recalling the basic principles of these deposition processes, results are presented concerning chemically deposited CdS on InP, GaP and CuInSe2 substrates, electrodeposited CdTe on InP, and CdSAnP heterostructures. Characterisation of these structures by RHEED, TEM, HRTEM, and glazing angle X ray diffraction allows to analyse the effects of substrate orientation, polarity, lattice match plus the influence of temperature on epitaxial growth. These results are discussed in terms of self organisation and a site selective growth mechanisms due to the free enegy of formation of each compound.

Synthesis of dispersed mesoporous powders solid solution Zr0.88Ce0.12O2 for catalyst carrier of the conversion of methane to synthesis –gas

2020 ◽  
pp. 73-83
Author(s):  
L. V. Morozova ◽  
◽  
I. A. Drozdova ◽  
Keyword(s):  
Solid Solution ◽  
Total Pore Volume ◽  
Nitrogen Adsorption ◽  
Primary Crystal ◽  
X Ray ◽  
Catalyst Carrier ◽  
Conversion Of Methane ◽  
Deposition Processes ◽  
Zirconia Oxide ◽  
Coprecipitation Of Hydroxides

The xerogels in the system 0.88 mol.% ZrO2 − 0.12 mol.% CeO2 were obtained by the method of coprecipitation in a neutral (pH = 7) and slightly alkaline (pH = 9) medium under the influence of ultrasound with the size of the agglomerates 70 – 230 nm. It is shown that the coprecipitation of hydroxides of zirconium and cerium at pH = 9 with the use of ultrasonic treatment facilitates the formation of a primary crystal is symbolic of the particles in the xerogel, whose size is ~ 5 nm, whereas the xerogel synthesized in a neutral environment consists only of the x-ray amorphous phase. The effect of pH-precipitation on deposition processes of dehydration of the xerogels and crystallization solid solution based on zirconia oxide in the metastable pseudocubic modification (с′-ZrO2) was discovered. It was found that in the temperature range 500 – 800 °C there is a phase transition с′-ZrO2 → t-ZrO2, the size of the crystallites of the formed tetragonal solid solutions is 8 and 11 nm. The method of low-temperature nitrogen adsorption were investigated dispersion properties and characteristics of the pore structure of the powders of the solid solution Zr0.88Ce0.12O2. It is determined that the specific surface area of t-ZrO2 samples obtained after firing at 800 °C is 117 and 178 m2/g, the total pore volume reaches 0.300 − 0.325 cm3/g, the pore size distribution is monomodal and is in the range of 2 − 8 nm. The effect of thermal “aging” at a temperature of 800 °C (40 h) on the structure and dispersion of the solid solution t-ZrO2 powders was studied.

scholarly journals Mineralization of Titanium Surfaces: Biomimetic Implants

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2879
Author(s):  
Javier Gil ◽  
Jose Maria Manero ◽  
Elisa Ruperez ◽  
Eugenio Velasco-Ortega ◽  
Alvaro Jiménez-Guerra ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Dental Implants ◽  
Early Stage ◽  
Calcium Phosphates ◽  
Biological Fixation ◽  
Biomimetic Surfaces ◽  
Titanium Surfaces ◽  
Deposition Processes ◽  
Fast Dissolution ◽  
Plasma Sprayed

The surface modification by the formation of apatitic compounds, such as hydroxyapatite, improves biological fixation implants at an early stage after implantation. The structure, which is identical to mineral content of human bone, has the potential to be osteoinductive and/or osteoconductive materials. These calcium phosphates provoke the action of the cell signals that interact with the surface after implantation in order to quickly regenerate bone in contact with dental implants with mineral coating. A new generation of calcium phosphate coatings applied on the titanium surfaces of dental implants using laser, plasma-sprayed, laser-ablation, or electrochemical deposition processes produces that response. However, these modifications produce failures and bad responses in long-term behavior. Calcium phosphates films result in heterogeneous degradation due to the lack of crystallinity of the phosphates with a fast dissolution; conversely, the film presents cracks, which produce fractures in the coating. New thermochemical treatments have been developed to obtain biomimetic surfaces with calcium phosphate compounds that overcome the aforementioned problems. Among them, the chemical modification using biomineralization treatments has been extended to other materials, including composites, bioceramics, biopolymers, peptides, organic molecules, and other metallic materials, showing the potential for growing a calcium phosphate layer under biomimetic conditions.

scholarly journals Characterization of Thin Chromium Coatings Produced by PVD Sputtering for Optical Applications

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 215
Author(s):  
Andreia A. Ferreira ◽  
Francisco J. G. Silva ◽  
Arnaldo G. Pinto ◽  
Vitor F. C. Sousa
Keyword(s):  
Automotive Industry ◽  
Vapor Deposition ◽  
Physical Vapor Deposition ◽  
Early Stage ◽  
Chemical Vapor ◽  
Experimental Tests ◽  
Scratch Test ◽  
Industrial Sectors ◽  
Deposition Processes ◽  
Optical Applications

PVD (physical vapor deposition) and CVD (chemical vapor deposition) have gained greater significance in the last two decades with the mandatory shift from electrodeposition processes to clean deposition processes due to environmental, public safety, and health concerns. Due to the frequent use of coatings in several industrial sectors, the importance of studying the chromium coating processes through PVD–sputtering can be realized, investing in a real alternative to electroplated hexavalent chromium, usually denominated by chromium 6, regularly applied in electrodeposition processes of optical products in the automotive industry. At an early stage, experimental tests were carried out to understand which parameters are most suitable for obtaining chromium coatings with optical properties. To study the coating in a broad way, thickness and roughness analysis of the coatings obtained using SEM and AFM, adhesion analyzes with the scratch-test and transmittance by spectrophotometry were carried out. It was possible to determine that the roughness and transmittance decreased with the increase in the number of layers, the thickness of the coating increased linearly, and the adhesion and resistance to climatic tests remained positive throughout the study. Thus, this study allows for the understanding that thin multilayered Cr coatings can be applied successfully to polymeric substrates regarding optical applications in the automotive industry.

scholarly journals Occurrence of drug target residues within decantation tank sediments: a good clue to assess their historical excretion?

2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Thomas Thiebault ◽  
Laëtitia Fougère ◽  
Anaëlle Simonneau ◽  
Emilie Destandau ◽  
Claude Le Milbeau ◽  
...  
Keyword(s):  
Drug Target ◽  
Chemical Properties ◽  
Deposition Process ◽  
Drug Consumption ◽  
Organic Layers ◽  
Sewer Systems ◽  
Physico Chemical ◽  
Deep Underground ◽  
Deposition Processes

AbstractThis study investigated the potential of sediments accumulated in sewer systems to record human activities through the occurrence of drug target residues (DTR). The installation studied is 17 m deep underground decantation tank that traps the coarse fractions of a unitary sewer system (northern part of Orléans, France), collecting both stormwater and wastewater. The sediments deposited in this tank could constitute a nonesuch opportunity to study the historical evolution of illicit and licit drug consumption in the catchment, however, the deposition processes and the record of DTRs remain largely unknown at present. Five cores were acquired from 2015 to 2017. One hundred fifty-two sediment samples were extracted using a mixture of ultra-pure water:methanol (1:1) prior to analysis of the extracts by high-pressure liquid chromatography coupled to tandem mass spectrometry. Several classical sedimentological analyses such as total organic carbon, facies description and granulometry were also performed on these samples, in order to understand the most important factors (e.g., physico-chemical properties of the DTRs, solid type, assumed load in wastewater) impacting their deposition.The key role of the speciation of DTRs was highlighted by the higher contents in neutral and anionic DTRs in organic layers, whereas only cationic DTRs were found in mineral layers. The considerable modifications in the sediments’ properties, generated by distinct origins (i.e., stormwater or wastewater), are therefore the most important drivers that must be taken into account when back-calculating the historical patterns of drug consumption from their DTR concentrations in decantation tank sediments. Further research remains necessary to fully understand the deposition process, but this study provides new clues explaining these temporal evolutions.

Sign in / Sign up

Export Citation Format

Share Document