State-of-the-Art Constitutive Models of Skin Biomechanics

2016 ◽  
pp. 119-156 ◽  
Keyword(s):  
State Of The Art ◽  
Constitutive Models ◽  
Skin Biomechanics

scholarly journals Constitutive Models for the Tensile Behaviour of TRM Materials: Literature Review and Experimental Verification

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 700
Author(s):  
Maria Concetta Oddo ◽  
Giovanni Minafò ◽  
Lidia La Mendola
Keyword(s):  
State Of The Art ◽  
Constitutive Models ◽  
Stress Transfer ◽  
Theoretical Models ◽  
Tensile Tests ◽  
Analytical Models ◽  
Tensile Behaviour ◽  
Tensile Response ◽  
Textile Reinforced Mortar ◽  
Inorganic Matrix

In recent years, the scientific community has focused its interest on innovative inorganic matrix composite materials, namely TRM (Textile Reinforced Mortar). This class of materials satisfies the need of retrofitting existing masonry buildings, by keeping the compatibility with the substrate. Different recent studies were addressed to improve the knowledge on their mechanical behaviour and some theoretical models were proposed for predicting the tensile response of TRM strips. However, this task is complex due to the heterogeneity of the constituent materials and the stress transfer mechanism developed between matrix and fabric through the interface in the cracked stage. This paper presents a state-of-the-art review on the existing constitutive models for the tensile behavior of TRM composites. Literature experimental results of tensile tests on TRM coupons are presented and compared with the most relevant analytical models proposed until now. Finally, a new experimental study is presented and its results are used to further verify the reliability of the literature expressions.

State of the Art of Constitutive Model of Concrete Materials Based on Damage Mechanics

2011 ◽  
Vol 194-196 ◽  
pp. 848-852
Author(s):  
Duo Xin Zhang ◽  
Qing Yun Wang
Keyword(s):  
Constitutive Model ◽  
Damage Mechanics ◽  
State Of The Art ◽  
Constitutive Models ◽  
Experimental Tests ◽  
Constitutive Relationship ◽  
Model Parameters ◽  
Softening Effect ◽  
Volumetric Expansion ◽  
Concrete Materials

This study centered on the development of constitutive model of the material based on damage mechanics. Volumetric expansion, unilateral behavior and softening effect have been pointed out as three difficulties during setting constitutive model of concrete, the applicable and deficiency of the existed constitutive relationship been reviewed, and the methods used to deal above difficulties were overviewed, Meanwhile, the background of existed model has been summarized and listed systematically. The development of a thermodynamic approach to constitutive model of concrete, with emphasis on the rigorous and consistency both in the formulation of constitutive models and in the identification of model parameters based on experimental tests has been potential direction of the future study, and hoped furnished basement for the elastic to plastic coupled damage mechanics constitutive model of concrete.

A Historical Overview of Design Analyses and Experimental Observations of Ratcheting Phenomenon

2020 ◽  
Author(s):  
Jean Macedo ◽  
Stéphane Chapuliot ◽  
Jean-Michel Bergheau ◽  
Eric Feulvarch ◽  
Olivier Ancelet ◽  
...  
Keyword(s):  
Cyclic Loading ◽  
State Of The Art ◽  
Constitutive Models ◽  
Experimental Tests ◽  
Design Codes ◽  
Historical Overview ◽  
Design Rules ◽  
Current Article ◽  
The Difference ◽  
Design Analyses

Abstract In order to investigate the ratcheting behavior and to determine new design rules, some experimental tests were conducted in many countries in the last decades. In France, some tests were carried out under mechanical or thermal cyclic loading to examine this risk. The first section of the current article is addressed to the state of the art concerning the ratcheting effects. The difference between Local and Global Ratcheting is clarified. The second section is dedicated to the experimental observations of ratcheting. The following section describes the constitutive models which are able to simulate material/structural ratcheting responses. The models presented are Linear Kinematic, Armstrong-Frederick, Chaboche, Ohno-Wang and Chen-Jiao-Kim. Finally, the ratcheting rules in design codes are exposed. Both simple and complex rules are presented.

A comparative study on hyperelastic constitutive models on rubber: State of the art after 2006

2019 ◽  
pp. 239-244 ◽  
Author(s):  
Hüsnü Dal ◽  
Yashar Badienia ◽  
Kemal Açikgöz ◽  
Funda Aksu Denlï
Keyword(s):  
Comparative Study ◽  
State Of The Art ◽  
Constitutive Models ◽  
Rubber State

Constitutive Relations of Masonry under Compression — A State-of-the-Art Review

2014 ◽  
Vol 919-921 ◽  
pp. 1755-1759
Author(s):  
Xue Yu Xiong ◽  
Sen Zhang ◽  
Li Jun Wang ◽  
Rong Jun Xue
Keyword(s):  
Experimental Data ◽  
Constitutive Relation ◽  
State Of The Art ◽  
Constitutive Relations ◽  
Constitutive Models ◽  
Future Research ◽  
State Of Art

An in depth state-of-art review is done on the topic,constitutive relations of masonry under compression. 12 constitutive models of masonry proposed by scholars from home and abroad are presented in the paper. These models can be classified into four types. Merits and drawbacks of each constitutive relation are discussed. Ten typical constitutive relations are selected to make comparisons. Results show that the ascending branch of curves has few differences, major differences occur in the descending branch of curves. Besides, two experimental data are used to analyze the models and results are discussed. Furthermore, some suggestions on this topic in future research are presented.

Practical Picture Processing

1974 ◽  
Vol 32 ◽  
pp. 338-339
Author(s):  
T. A. Welton
Keyword(s):  
Radiation Damage ◽  
Coherence Length ◽  
Spatial Information ◽  
State Of The Art ◽  
Coherent Radiation ◽  
The State ◽  
Energy Spread ◽  
Electron Micrograph ◽  
Picture Processing ◽  
Molecular Skeleton

Various authors have emphasized the spatial information resident in an electron micrograph taken with adequately coherent radiation. In view of the completion of at least one such instrument, this opportunity is taken to summarize the state of the art of processing such micrographs. We use the usual symbols for the aberration coefficients, and supplement these with £ and 6 for the transverse coherence length and the fractional energy spread respectively. He also assume a weak, biologically interesting sample, with principal interest lying in the molecular skeleton remaining after obvious hydrogen loss and other radiation damage has occurred.

A Macintosh Interface for the Cameca Camebax-Micro Electron Microprobe

1990 ◽  
Vol 48 (1) ◽  
pp. 438-439
Author(s):  
Carl E. Henderson
Keyword(s):  
Electron Microprobe ◽  
Processing Speed ◽  
Word Processing ◽  
State Of The Art ◽  
Computer Control ◽  
Third Party ◽  
Disk Storage ◽  
The Past ◽  
User Facility ◽  
Instrument Control

Over the past few years it has become apparent in our multi-user facility that the computer system and software supplied in 1985 with our CAMECA CAMEBAX-MICRO electron microprobe analyzer has the greatest potential for improvement and updating of any component of the instrument. While the standard CAMECA software running on a DEC PDP-11/23+ computer under the RSX-11M operating system can perform almost any task required of the instrument, the commands are not always intuitive and can be difficult to remember for the casual user (of which our laboratory has many). Given the widespread and growing use of other microcomputers (such as PC’s and Macintoshes) by users of the microprobe, the PDP has become the “oddball” and has also fallen behind the state-of-the-art in terms of processing speed and disk storage capabilities. Upgrade paths within products available from DEC are considered to be too expensive for the benefits received. After using a Macintosh for other tasks in the laboratory, such as instrument use and billing records, word processing, and graphics display, its unique and “friendly” user interface suggested an easier-to-use system for computer control of the electron microprobe automation. Specifically a Macintosh IIx was chosen for its capacity for third-party add-on cards used in instrument control.

Current Issues: Advanced Digital Technology for Supervising Graduate Clinicians

2010 ◽  
Vol 20 (1) ◽  
pp. 9-13 ◽  
Author(s):  
Glenn Tellis ◽  
Lori Cimino ◽  
Jennifer Alberti
Keyword(s):  
Real Time ◽  
Digital Technology ◽  
Clinical Training ◽  
State Of The Art ◽  
Clinical Skills ◽  
Slow Motion ◽  
Video Capture ◽  
Microsoft Excel ◽  
Clinical Supervisors ◽  
Training And Supervision

Abstract The purpose of this article is to provide clinical supervisors with information pertaining to state-of-the-art clinic observation technology. We use a novel video-capture technology, the Landro Play Analyzer, to supervise clinical sessions as well as to train students to improve their clinical skills. We can observe four clinical sessions simultaneously from a central observation center. In addition, speech samples can be analyzed in real-time; saved on a CD, DVD, or flash/jump drive; viewed in slow motion; paused; and analyzed with Microsoft Excel. Procedures for applying the technology for clinical training and supervision will be discussed.

Behavioral Genetics: Concepts for Research and Practice in Language Development and Disorders

1995 ◽  
Vol 38 (5) ◽  
pp. 1126-1142 ◽  
Author(s):  
Jeffrey W. Gilger
Keyword(s):  
Language Development ◽  
Behavioral Genetics ◽  
State Of The Art ◽  
Genetic Research ◽  
Great Promise ◽  
Behavioral Genetic ◽  
Fine Grained ◽  
Future Goals ◽  
Current State ◽  
Research Designs

This paper is an introduction to behavioral genetics for researchers and practioners in language development and disorders. The specific aims are to illustrate some essential concepts and to show how behavioral genetic research can be applied to the language sciences. Past genetic research on language-related traits has tended to focus on simple etiology (i.e., the heritability or familiality of language skills). The current state of the art, however, suggests that great promise lies in addressing more complex questions through behavioral genetic paradigms. In terms of future goals it is suggested that: (a) more behavioral genetic work of all types should be done—including replications and expansions of preliminary studies already in print; (b) work should focus on fine-grained, theory-based phenotypes with research designs that can address complex questions in language development; and (c) work in this area should utilize a variety of samples and methods (e.g., twin and family samples, heritability and segregation analyses, linkage and association tests, etc.).

Sign in / Sign up

Export Citation Format

Share Document