A seismic analysis of Black Creek and Wabumun salt collapse features, western Canadian sedimentary basin

Geophysics ◽  
1991 ◽  
Vol 56 (5) ◽  
pp. 618-627 ◽  
Author(s):  
N. L. Anderson ◽  
R. J. Brown

Two Devonian salts of western Canada, those of the Black Creek member (Upper Elk Point subgroup) in northwest Alberta and those of the Wabamun group in southeastern Alberta, were widely distributed and uniformly deposited within their respective basins. Both of these salts are interbedded within predominantly carbonate sequences and both have been extensively leached. They are now preserved as discontinuous remnants of variable thickness and areal extent. These salt remnants and their associated collapse features are often associated with structural or stratigraphic traps. Structural traps typically form where reservoir facies are closed across remnant salts, stratigraphic traps often develop where reservoir facies were either preferentially deposited and/or preserved in salt collapse lows. As a result of these relationships between dissolution and hydrocarbon entrapment, the distribution (areal extent and thickness) of these salt remnants is of significant interest to the explorationist. Both the Black Creek and Wabamun salts have relatively abrupt contacts with the encasing higher velocity, higher density carbonates. Where these salts are sufficiently thick, their top and base typically generate high amplitude reflections, and lateral variations in the salt isopach can be directly determined from the seismic data. Relative salt thicknesses can also be indirectly estimated through analyses of lateral variations in the thicknesses of the encompassing carbonates, time structural drape and velocity pullup. Such seismic information about the thickness and the extent of these salts should be used together with well log control to generate subsurface distribution maps. These maps will facilitate both the delineation of prospective structural and stratigraphic play fairways and the determination of the timing of salt dissolution. In addition, an appreciation of regional salt distribution will decrease the likelihood that remnant salts will be misinterpreted as either reefs and/or faulted structures.

1978 ◽  
Vol 18 (1) ◽  
pp. 109
Author(s):  
R. B. Mariow

The Golden Beach closed anticlinal structure lies five kilometres offshore in the Gippsland Basin. Golden Beach 1A was drilled in 1967 near the crest of the structure and intersected a gas column of 19 m (63 feet) at the top of the Latrobe Group (Late Eocene) where most of the hydrocarbon accumulations in the Gippsland Basin have been found. The gas-water contact lies at a depth of 652 m (2139 feet) below sea level.On seismic data recorded over the structure, a high amplitude flat-lying event was interpreted as a bright 'flat spot' at the gas-water contact. Reprocessing of the seismic data enhanced the bright spot effect and enabled the areal extent of the gas zone to be mapped. The presence of the gas also leads to a polarity reversal of the top of the Latrobe Group seismic reflector over the gas accumulation.Seismic data from other structures containing hydrocarbons in the Gippsland Basin support the concept that bright spots and flat spots are more likely to be associated with gas than with oil accumulations, and that the observed bright spot effect decreases with increasing depth.


Geophysics ◽  
1989 ◽  
Vol 54 (2) ◽  
pp. 148-157 ◽  
Author(s):  
N. L. Anderson ◽  
R. J. Brown ◽  
R. C. Hinds ◽  
L. V. Hills

Swan Hills formation (Frasnian stage) carbonate buildups of the Beaverhill Lake group are generally of low relief and considerable areal extent and are overlain by and encased within the relatively high‐velocity shale of the Waterways formation, which thins but does not drape across the reefs. Consistent with this picture, prereef seismic events are not significantly pulled up beneath the reefs nor are postreef events draped across them. Indeed, the seismic images of these reefs are effectively masked by the high‐amplitude reflections from the overlying top of the Beaverhill Lake group and underlying Gilwood member and cannot be distinguished from those of the basin fill. However, it is possible to identify the reefs indirectly on conventionally processed seismic sections because the image of the encompassing Beaverhill Lake/Gilwood interval varies significantly from onreef to offreef positions. One such Swan Hills formation field at Snipe Lake has an areal extent of about [Formula: see text] and typical reef relief of some 50 m above the platform facies. This reef is shown to be recognizable on three example seismic lines from interference phenomena that vary laterally in association with the lateral variations in thickness of the Swan Hills formation. These phenomena include an offreef peak that is one half‐cycle below the Beaverhill Lake reflection trough and that dies out laterally going onreef, a tendency for the amplitude of the Gilwood event to decrease beneath the reef, and thinning of the order of 5 ms of the onreef section relative to the offreef section. Through seismic modeling, these seismic‐image characteristics are seen to be predictable geophysical manifestations of the inherent geologic variations.


2013 ◽  
Vol 31 (4) ◽  
pp. 619 ◽  
Author(s):  
Luiz Eduardo Soares Ferreira ◽  
Milton José Porsani ◽  
Michelângelo G. Da Silva ◽  
Giovani Lopes Vasconcelos

ABSTRACT. Seismic processing aims to provide an adequate image of the subsurface geology. During seismic processing, the filtering of signals considered noise is of utmost importance. Among these signals is the surface rolling noise, better known as ground-roll. Ground-roll occurs mainly in land seismic data, masking reflections, and this roll has the following main features: high amplitude, low frequency and low speed. The attenuation of this noise is generally performed through so-called conventional methods using 1-D or 2-D frequency filters in the fk domain. This study uses the empirical mode decomposition (EMD) method for ground-roll attenuation. The EMD method was implemented in the programming language FORTRAN 90 and applied in the time and frequency domains. The application of this method to the processing of land seismic line 204-RL-247 in Tacutu Basin resulted in stacked seismic sections that were of similar or sometimes better quality compared with those obtained using the fk and high-pass filtering methods.Keywords: seismic processing, empirical mode decomposition, seismic data filtering, ground-roll. RESUMO. O processamento sísmico tem como principal objetivo fornecer uma imagem adequada da geologia da subsuperfície. Nas etapas do processamento sísmico a filtragem de sinais considerados como ruídos é de fundamental importância. Dentre esses ruídos encontramos o ruído de rolamento superficial, mais conhecido como ground-roll . O ground-roll ocorre principalmente em dados sísmicos terrestres, mascarando as reflexões e possui como principais características: alta amplitude, baixa frequência e baixa velocidade. A atenuação desse ruído é geralmente realizada através de métodos de filtragem ditos convencionais, que utilizam filtros de frequência 1D ou filtro 2D no domínio fk. Este trabalho utiliza o método de Decomposição em Modos Empíricos (DME) para a atenuação do ground-roll. O método DME foi implementado em linguagem de programação FORTRAN 90, e foi aplicado no domínio do tempo e da frequência. Sua aplicação no processamento da linha sísmica terrestre 204-RL-247 da Bacia do Tacutu gerou como resultados, seções sísmicas empilhadas de qualidade semelhante e por vezes melhor, quando comparadas as obtidas com os métodos de filtragem fk e passa-alta.Palavras-chave: processamento sísmico, decomposição em modos empíricos, filtragem dados sísmicos, atenuação do ground-roll.


Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 293
Author(s):  
Wei Tian ◽  
Xiaomin Li ◽  
Lei Wang

Disparities between fold amplitude (A) and intrusion thickness (Hsill) are critical in identifying elastic or inelastic deformation in a forced fold. However, accurate measurements of these two parameters are challenging because of the limit in separability and detectability of the seismic data. We combined wireline data and 3-D seismic data from the TZ-47 exploring area in the Tarim Basin, Northwest China, to accurately constrain the fold amplitude and total thickness of sills that induced roof uplift in the terrain. Results from the measurement show that the forced fold amplitude is 155.0 m. After decompaction, the original forced fold amplitude in the area penetrated by the well T47 ranged from 159.9 to 225.8 m, which overlaps the total thickness of the stack of sills recovered by seismic method (171.4 m) and well log method (181.0 m). Therefore, the fold amplitude at T47 area is likely to be elastic. In contrast, the outer area of the TZ-47 forced fold is characterized by shear-style deformation, indicating inelastic deformation at the marginal area. It is suggested that interbedded limestone layers would play an important role in strengthening the roof layers, preventing inelastic deformation during the emplacement of intrusive magma.


Plants ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 499
Author(s):  
Vítězslav Plášek ◽  
Zuzana Komínková ◽  
Ryszard Ochyra ◽  
Lucie Fialová ◽  
Shuiliang Guo ◽  
...  

A total of 46 species and two varieties of the traditionally interpreted genus Orthotrichum are currently known to occur in China. They represent five genera, including Orthotrichum (29 species), Lewinskya (14 species and two varieties), and Nyholmiella and Leratia that are represented by a single species each. The fifth genus Florschuetziella, also consisting of only one species, F. scaberrima, is an entirely neglected representative of the China’s moss flora. A list of all accepted taxa is presented and for each taxon all literature records and herbarium specimens are enumerated for provinces in which they have been recorded, and their distribution is mapped. A key to determination of Chinese orthotrichalean mosses is presented. A chronological list of 63 species and varieties and two designations, O. catagonioides and O. microsporum which have never been validly published, reported from China in the years 1892–2020 is presented. Four species, Orthotrichum brasii, O. hooglandii, O. elegans and O. gymnostomum are excluded from the bryoflora of China and Lewinskya affinis var. bohemica and Orthotrichum schimperi are recorded for the first time from this country. Phytogeography of the Chinese taxa of the orthotrichalean mosses is considered and they are grouped into eight phytogeographical elements and five sub-elements.


Geophysics ◽  
1973 ◽  
Vol 38 (2) ◽  
pp. 310-326 ◽  
Author(s):  
R. J. Wang ◽  
S. Treitel

The normal equations for the discrete Wiener filter are conventionally solved with Levinson’s algorithm. The resultant solutions are exact except for numerical roundoff. In many instances, approximate rather than exact solutions satisfy seismologists’ requirements. The so‐called “gradient” or “steepest descent” iteration techniques can be used to produce approximate filters at computing speeds significantly higher than those achievable with Levinson’s method. Moreover, gradient schemes are well suited for implementation on a digital computer provided with a floating‐point array processor (i.e., a high‐speed peripheral device designed to carry out a specific set of multiply‐and‐add operations). Levinson’s method (1947) cannot be programmed efficiently for such special‐purpose hardware, and this consideration renders the use of gradient schemes even more attractive. It is, of course, advisable to utilize a gradient algorithm which generally provides rapid convergence to the true solution. The “conjugate‐gradient” method of Hestenes (1956) is one of a family of algorithms having this property. Experimental calculations performed with real seismic data indicate that adequate filter approximations are obtainable at a fraction of the computer cost required for use of Levinson’s algorithm.


2021 ◽  
pp. 1-50
Author(s):  
Yongchae Cho

The prediction of natural fracture networks and their geomechanical properties remains a challenge for unconventional reservoir characterization. Since natural fractures are highly heterogeneous and sub-seismic scale, integrating petrophysical data (i.e., cores, well logs) with seismic data is important for building a reliable natural fracture model. Therefore, I introduce an integrated and stochastic approach for discrete fracture network modeling with field data demonstration. In the proposed method, I first perform a seismic attribute analysis to highlight the discontinuity in the seismic data. Then, I extrapolate the well log data which includes localized but high-confidence information. By using the fracture intensity model including both seismic and well logs, I build the final natural fracture model which can be used as a background model for the subsequent geomechanical analysis such as simulation of hydraulic fractures propagation. As a result, the proposed workflow combining multiscale data in a stochastic approach constructs a reliable natural fracture model. I validate the constructed fracture distribution by its good agreement with the well log data.


1967 ◽  
Vol 57 (6) ◽  
pp. 1367-1392
Author(s):  
Eduard Berg ◽  
Susumu Kubota ◽  
Jurgen Kienle

Abstract Seismic and gravity observations were carried out in the active volcanic area of Katmai in the summer of 1965. A determination of hypocenters has been aftempted using S and P arrivals at a station located at Kodiak and two stations located in the Monument. However, in most cases, deviations of travel times from the Jeffreys-Bullen tables were rather large. Therefore hypocenters are not well located. A method based on P- and S-wave arrivals yields a Poisson's ratio of 0.3 for the upper part of the mantle under Katmai. This higher value is probably due to the magma formation. The average depth to the Moho from seismic data in the same area is 38 km and 32 km under Kodiak. Using Woollard's relation between Bouguer anomaly and depth to the Moho, a small mountain root under the volcanoes with a depth of 34 km was found dipping gently up to 31 km on the NW side. The active volcanic cones are located along an uplift block. This block is associated with a 35 mgal Bouguer anomaly. The Bouguer anomaly contour map for the Alaska Peninsula is given and an interpretation attempted.


Sign in / Sign up

Export Citation Format

Share Document