Spin-Coating Process of an Inorganic Sb2S3 Thin Film for Photovoltaic Applications

2016 ◽  
Vol 16 (10) ◽  
pp. 10763-10766 ◽  
Author(s):  
Eun Kyung Gil ◽  
Sang-Ju Lee ◽  
Shi-Joon Sung ◽  
Kuk Young Cho ◽  
Dae-Hwan Kim
Keyword(s):  
Thin Film ◽  
Spin Coating ◽  
Coating Process ◽  
Spin Coating Process ◽  
Photovoltaic Applications

Characterization and Synthesis of Functional TiO2 Sol-Gel Coatings on the Glass

2006 ◽  
Vol 510-511 ◽  
pp. 94-97
Author(s):  
Dae Yong Shin ◽  
Myung Gi So ◽  
Sang Mok Han
Keyword(s):  
Thin Film ◽  
Crystal Structure ◽  
Spin Coating ◽  
Air Pollutants ◽  
Water Drop ◽  
Sol Gel ◽  
Molecular Size ◽  
Coating Process ◽  
Tio2 Films ◽  
Spin Coating Process

Thin film photocatalysts of TiO2 coated on the glass were prepared to self-clean and eliminate air pollutants by spin coating process with Ti(OC3H7 i)4, including PEG. The surface structure of TiO2 films changed according to the molecular size of PEG. It was found that NOx was efficiently eliminated by the TiO2 film photocatalyst. The contact angle of water drop on the TiO2 films decreased to less than 10°. It revealed the hydrophilic property of TiO2 films. The morphology and the crystal structure of TiO2 films were affected most.

scholarly journals Preparation of Cu(In,Ga)Se2 Thin Film by Solvothermal and Spin-coating Process

2012 ◽  
Vol 16 ◽  
pp. 217-222 ◽  
Author(s):  
Ying Liu ◽  
Deyi Kong ◽  
Jiawei Li ◽  
Cong Zhao ◽  
Chilai Chen ◽  
...  
Keyword(s):  
Thin Film ◽  
Spin Coating ◽  
Coating Process ◽  
Spin Coating Process

A flexible, integrated film battery configuration for ultrafast sodium ion storage

2021 ◽  
Author(s):  
Wenyu Zhao ◽  
Helin Wang ◽  
Shaowen Li ◽  
Xiaoyu Tang ◽  
Min Zhang ◽  
...  
Keyword(s):  
Thin Film ◽  
Spin Coating ◽  
Sodium Ion ◽  
Coating Process ◽  
Composite Anode ◽  
Spin Coating Process ◽  
Full Cell ◽  
Nasicon Type ◽  
Ion Storage ◽  
Sodium Ion Storage

A flexible thin-film full cell prototype was fabricated by integrating a composite anode (1T-MoS2/NCF) and a NASICON-type cathode (NVPF) onto both sides of a nano-AlOx modified polyethylene (AlOx-MPE) separator via the spin-coating process.

scholarly journals Effect of Aging Time on the Synthesis of Fe-doped TiO2 Thin Films by Spin Coating Method

2016 ◽  
Vol 1 ◽  
Author(s):  
Dahyunir Dahlan
Keyword(s):  
Thin Film ◽  
Aging Time ◽  
Spin Coating ◽  
Anatase Phase ◽  
Precursor Solution ◽  
Coating Process ◽  
Titanium Butoxide ◽  
Spin Coating Process ◽  
Spin Coating Method ◽  
Coating Method

<p>The synthesis of Fe-doped TiO<sub>2</sub> thin film using spin coating method was studied. Effects of aging time on the deposited thin film were investigated. Titanium butoxide (C<sub>16</sub>H<sub>36</sub>O<sub>4</sub>Ti) as a precursor solution was mixed with the FeCl<sub>3</sub>. Spin coating process was carried out on three types of precursor solution: (1) spin-coating process performed immediately after the precursor solution was made, (2) spin-coating process performed after solution was aged for 24 hours, (3) aged for 24 and (4) spin-coating after aging the precursor for 72 hours. Heating was carried out on the resulting thin film at temperature of 400 °C. The morphology of TiO<sub>2</sub> layers was characterized using Scanning Electron Microscope (SEM) and Atomic Force Microscope (AFM). Elemental and phase composition of the films was determined using EDX and X-ray diffraction (XRD). We found that the best TiO<sub>2</sub> layer is obtained when spin-coating process is done after aging the precursor for 72 hours. The layer shows a more uniform particle distribution on the substrate and a more monodisperse particle size dominated by the anatase phase.</p>

scholarly journals Polymorphs of Neodymium Niobate and Tantalate Thin Films Prepared by Sol-Gel Method

2019 ◽  
Vol 19 (1) ◽  
pp. 34-43
Author(s):  
H. Bruncková ◽  
Ľ. Medvecký ◽  
E. Múdra ◽  
A. Kovalčiková
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Surface Morphology ◽  
Spin Coating ◽  
Sol Gel ◽  
Coating Process ◽  
Spin Coating Process ◽  
Gel Method ◽  
Afm Analysis ◽  
Thin Film Devices

AbstractNeodymium niobate NdNbO4 (NNO) and tantalate NdTaO4 (NTO) thin films (~100 nm) were prepared by sol-gel/spin-coating process on Pb(Zr0.52Ti0.48)O3/Al2O3 substrates with annealing at 1000°C. The precursors of films were synthesized using Nb or Ta tartrate complexes. The XRD results of NNO and NTO films confirmed tetragonal T-NdNbO4 and T-NdTaO4 phases, respectively, with traces of monoclinic MNdNbO4 and M´-NdTaO4. The surface morphology and topography were investigated by SEM and AFM analysis. NTO was smoother with roughness 5.24 nm in comparison with NNO (6.95 nm). In the microstructure of NNO, small spherical (~ 20-50 nm) T-NdNbO4 and larger needle-like particles (~100 nm) of M-NdNbO4 phase were observed. The compact clusters composed of fine spherical T-NdTaO4 particles (~ 50 nm) and cuboidal M´-NdTaO4 particles (~ 100 nm) were found in NTO. The results of this work can contribute to formation of different polymorphs of films for the application in environmental electrolytic thin film devices.

Effect of substrate curvature on thickness distribution of polydimethylsiloxane thin film in spin coating process

2018 ◽  
Vol 27 (6) ◽  
pp. 068104 ◽  
Author(s):  
Ying Yan ◽  
Ping Zhou ◽  
Shang-Xiong Zhang ◽  
Xiao-Guang Guo ◽  
Dong-Ming Guo
Keyword(s):  
Thin Film ◽  
Spin Coating ◽  
Thickness Distribution ◽  
Coating Process ◽  
Spin Coating Process ◽  
Substrate Curvature
Sign in / Sign up

Export Citation Format

Share Document