scholarly journals Recommendations on Quality Control and Quality Assurance in Cervical Cytology

2015 ◽  
Vol 59 (5) ◽  
pp. 361-369 ◽  
Author(s):  
Margherita Branca ◽  
Adhemar Longatto-Filho
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
Literature Review ◽  
Study Design ◽  
Uterine Cervix ◽  
Screening Programme ◽  
Critical Evaluation ◽  
Routine Work ◽  
Cytology Study

Objective: We aimed to critically evaluate the importance of quality control (QC) and quality assurance (QA) strategies in the routine work of uterine cervix cytology. Study Design: We revised all the main principles of QC and QA that are already being implemented worldwide and then discussed the positive aspects and limitations of these as well as proposing alternatives when pertinent. Results: A literature review was introduced after highlighting the main historical revisions, and then a critical evaluation of the principal innovations in screening programmes was conducted, with recommendations being postulated. Conclusions: Based on the analysed data, QC and QA are two essential arms that support the quality of a screening programme.

Analysis of Contractor Pay Adjustment Schedule Using Simulation

1996 ◽  
Vol 1544 (1) ◽  
pp. 109-115
Author(s):  
Robert P. Elliott ◽  
Yanjun Qiu
Keyword(s):  
Computer Simulation ◽  
Quality Control ◽  
Quality Assurance ◽  
Quality Index ◽  
Direct Analysis ◽  
Detailed Examination ◽  
Construction Contracts ◽  
Simulation Process ◽  
Control Quality

A common provision in quality control/quality assurance construction contracts is the adjustment of the contractor's pay on the basis of the quality of the construction. The expected impact of the provision on the pay should be examined to ensure that the adjustments are neither unduly severe nor excessively lenient. Most pay adjustment plans have been developed around a quality index by using a percent defective approach. Analyses of these plans are complex but reasonably well defined. Other plans, however, are more complex and do not lend themselves to direct analysis. These plans can be examined by computer simulation. The use of computer simulation to examine a complex pay adjustment provision is demonstrated. The analyses show that simulation can reveal that a pay adjustment schedule behaves differently than it appears on the surface. For example, the schedule examined bases pay solely on averages and appears to ignore construction variability. The analyses, however, demonstrate that the pay adjustments are at least as sensitive to construction variability as they are to construction averages. It is also shown that the simulation process can provide a better, more detailed examination of the pay schedule than is possible by simply determining the expected pay. In particular, the simulation process can provide an indication of the variability of pay at various quality levels and can identify the factors most responsible for pay adjustments.

scholarly journals Monitoring the quality of sewer renewal using polymeric systems in Sweden

2019 ◽  
Vol 14 (3) ◽  
pp. 605-613 ◽  
Author(s):  
Parastou Kharazmi
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
Field Studies ◽  
Infrastructure Investment ◽  
Sufficient Information ◽  
Polymeric Systems ◽  
Water And Wastewater ◽  
Pipe Replacement ◽  
Different Parts

Abstract Water and wastewater pipes require some of the highest levels of infrastructure investment; they also deteriorate faster than they can be repaired. The use of alternative rehabilitation technologies, which are quicker and less expensive than pipe replacement, has therefore increased significantly in recent years, worldwide. Field studies on relined wastewater pipes removed from buildings in different parts of Sweden revealed the existence of a variety of common defects, most of which could have been prevented by better installation. Increased quality-focused monitoring could help to ensure that relined pipes reach their expected service life, while comprehensive documentation could assist in providing sufficient information to facilitate progress in the field. This paper includes a brief overview of the technologies used in Sweden, current quality control practices, repeated observed defects related to installation, crucial steps that affect final quality, and recommendations to be considered in the contexts of detailed quality control and quality assurance procedures.

scholarly journals شریعت اسلام کی رُو سے خواتین کے بالوں کی زیب و زینت :ایک تحقیقی جائزہ

Al-Duhaa ◽  
2021 ◽  
Vol 2 (02) ◽  
pp. 47-66
Author(s):  
Hafiza Saman Sarwar Saman ◽  
Dr. Abdul Rasheed Qadri
Keyword(s):  
Literature Review ◽  
Study Design ◽  
The Body ◽  
Men And Women ◽  
Beauty Salon ◽  
Iconic Image ◽  
Narrative Literature ◽  
Narrative Literature Review ◽  
Beauty Products

Allah is beautiful and He loves beauty. There is no doubt that in Islam, beauty is a very important characteristic but also a quality of the body and heart. In a world where the criteria of beauty seem to change from year to year according to trends and people nothing like a homecoming. This article identifies the concept of women’s hair beautification in the frame world of Islam. This research paper raises a very important question to ponder upon: What are the permissible ways of women’s beautification in Islam.? The article beautification of women and its concept in the main sources of Islam. Quran verses and Prophet's Saying Hadith/Sunnah (Blessing of Almighty Allah SHW) in addition to the opinions saying of Islamic scholars. Written as a narrative literature review. The paper aims to study design and spatial relationships in health and beauty treatment by blending modern settings within the Islamic perspective. A beauty salon or beauty parlor means a business dealing with cosmetic treatment for men and women, which is from the hair to toes. Other variations of this type of business are including hair salons and spas. A beauty salon has become an almost iconic image in Pakistan and other countries. A beauty salon and beauty products are also a center for community news and confessions. This article focuses on Islam and issues due to Beautification effects in our society, religious.

scholarly journals Quality assurance strategy of pharmacy compounded drugs

2019 ◽  
pp. 66-72
Author(s):  
O. A. Zdoryk
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
Quality Management System ◽  
General Scheme ◽  
General Strategy ◽  
Preparation Process ◽  
Critical Factors ◽  
Preparation Conditions

Formulations and in-pharmacy preparation process of compounded drugs were being created for centuries, and seem to have no concerns regarding the quality, compatibility and stability during storage or usage. Taking in mind modern trends for quality assurance and standardization of drugs, quality of preparation process of compounded drugs can be proved by using of a systematic approach that is based on pharmaceutical quality systems. Variability of preparation conditions, preparation equipment from pharmacy to pharmacy, personal professional skills require the development of defined standards, rules and summarized the strategy of quality assurance of compounded drugs. The aim of this paper was determination of critical factors and development of the design for quality assurance of compounded drugs. The materials of this study were the regulative base of Ukraine, international documents, guidances and own investigations concerning the requirements for the preparation process and quality control of compounded drugs. The methods used were data systematical analysis, bibliosemantic and summary. The achievement of good quality of compounded drugs can be present as a step-by-step process, that cover adherence to necessary preparation procedure and knowledge of peculiarities of drugs, process understanding, identification of risks and its evaluation, minimization and implementation of the quality management system for documentation, equipment and personnel. As a result of preparation schemes analysis, the critical factors were determined and the Fishbone diagram was proposed. The factors contributing to the general strategy of compounded drugs quality assurance, such as prescription analysis, personnel, regulative base, conditions of preparation process and equipment, documentation, dispensing, characteristics of active ingredients and additives, compounding design, preparation technology, containers and package, quality control, stability and labelling were determined. The proposed diagram of causes and effects can be used as a template for the identification and quantification of risks during preparation and quality control of compounded drugs. The proposed general scheme for quality assurance is necessary for organization and optimization of monitoring preparation and quality control, implementation of remedial and preventive measures, tracking of causes, nonconformities, and prevention of its repetition, management of variables, determination of improvement possibilities and audit conducting.

scholarly journals PENGARUH SUPERVISI DAN KEPUASAN KERJA TERHADAP TINDAKAN YANG MENURUNKAN KUALITAS AUDIT

2017 ◽  
Vol 19 (1) ◽  
pp. 1
Author(s):  
Kurnia Kurnia ◽  
Ernie Tisnawati Sule
Keyword(s):  
Job Satisfaction ◽  
Quality Control ◽  
Regression Analysis ◽  
Control System ◽  
Literature Review ◽  
Multiple Regression Analysis ◽  
Audit Quality ◽  
Job Dissatisfaction ◽  
Audit Firms

This study examines the effect of supervision and job satisfaction on reduced audit quality. Based on the literature review, this study hypothesize that supervision and job satisfaction have an effect on reduced audit quality. This study uses data from auditors of audit firms listing in Bapepam-Lembaga Keuangan (LK). Data was collected through questionnaires. The respondents of this research are junior auditors, senior, supervisor, and manager. Data were analyzed using multiple regression analysis for testing hypothesis. The results show that supervision and job satisfaction have a negatively effect on reduced audit quality. Spesifically, this study indicates that auditors who have perceived that supervision isn’t effective are more likely to commit reduced audit quality. The results also indicate that auditors who their job satisfaction is lower tend to engage in reduced audit quality. Based on these results, to improve the quality of audit, quality control system in KAP should ensure that the supervision procedures have been implemented as appropriate, as well as ensuring that all work has been supervised by his superior auditor. Based on the results of this study also suggested that KAP improve conditions that can cause job dissatisfaction.

Human and Organization Errors in Reliability of Offshore Structures

1997 ◽  
Vol 119 (1) ◽  
pp. 46-52 ◽  
Author(s):  
R. G. Bea
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
Life Cycle ◽  
Offshore Structures ◽  
Quality Characteristics ◽  
Assessment Process ◽  
Environmental Considerations ◽  
Generic Process

This paper addresses human and organization errors (HOE) in the context of quantitative reliability analyses (QRA) that are intended to help improve the quality of offshore structures. A classification of HOE is proposed that addresses individual, organization, equipment/hardware, procedures/software, and environmental considerations. A generic process to address the life-cycle quality characteristics of offshore structures incorporating HOE is discussed. Based on these developments, a probability-based risk analysis is developed that addresses HOE in addition to the structure system aspects. Alternatives for improved management of HOE are discussed including quality assurance and quality control (QA/QC), and design of error-tolerant or “robust” structures. Application of the HOE classification, generic assessment process, QRA formulation, and QA/QC measures are illustrated.

scholarly journals New requirements for technical acceptability of construction products as a component of the construction quality assurance system

2021 ◽  
Vol 1 (47) ◽  
pp. 108-118
Author(s):  
O. Lytvynenko
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
Life Cycle ◽  
Quality System ◽  
Cloud Services ◽  
Quality Assurance System ◽  
Construction Quality ◽  
Assurance System ◽  
Construction Products

The analysis and generalization of theoretical approaches to the formation of the construction quality system, the generalization of the legislative and regulatory framework for quality control in construction. Analysis of the theoretical prerequisites for the formation of quality control of construction revealed that the digital transformation of construction is an integral part of the development of modern society, a prerequisite for changing the system of construction, including control, quality assurance and evaluation of construction processes, works, materials, products and structures. It was found that the quality in construction is directly affected by the following factors: quality and completeness of design documentation; the possibility and obligation to comply with legal requirements; quality of construction processes and works, strict compliance with the requirements of technology and construction organization; quality of construction products and structures; technical ability to provide a given level of quality with the help of machines, mechanisms, means of small mechanization, etc .; the level of qualification of management staff, workers and line ITP. The quality system itself can be presented in the format of a "black box", where the factor will be named at the entrance, and at the exit - buildings and structures that meet a given level of quality throughout the life cycle of the object. It is proposed to consider the construction quality management system in the form of a multicomponent formation and at the same time a dynamic environment, which is constantly changing under the influence of external and internal factors and has a high degree of scholasticism and uncertainty. With the introduction of digital technologies in the organization of construction, including VIM modeling, use of artificial intelligence, cloud services for information storage, quality control tools that can be performed without human intervention, such as drones, robotic elements, surveillance cameras and others, the construction quality assurance system has to change, taking into account the realities of time. Therefore, the system of quality formation in the article is proposed to be considered throughout the life cycle of the object - from pre-project research to liquidation. This will, in contrast to existing approaches, not only combine into a single system all the components of assurance, evaluation and quality control, which are used at the level of all participants in the construction, but also to ensure integrated process management.

scholarly journals Different views on assuring the quality of honours programmes

2017 ◽  
Vol 1 (1) ◽  
pp. 1-12
Author(s):  
Pierre van Eijl ◽  
Henmar Moesker ◽  
Marleen Eyckmans
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
The United States ◽  
Internal Quality Control ◽  
Annual Reports ◽  
Internal Quality ◽  
Internal Quality Assurance ◽  
Formal Procedures

Can we match formal procedures for quality assurance with the creativity and individuality that defines honours? In a session at the Utrecht Honours Conference 2016: Honours Futures we discussed experiences in quality assurance of honours programmes in the United States of America, the Netherlands and Belgium. To illustrate the possibilities, a case study of using an external audit for honours education and two case studies of the use of internal quality assurance tools in an honours programme were presented. It is concluded that a form of quality assurance is needed to continuously improve. So honours educators must at least care for internal quality control. Student involvement is stimulating for the engagement of all participants in the process of quality control. Internal quality control may result in an annual report. Annual reports can be used both internally and in external quality control.

scholarly journals GMP/GACP - new standards for quality assurance of cannabis

2020 ◽  
Vol 66 (1) ◽  
pp. 91-101
Author(s):  
Mirela Ilikj ◽  
Irena Brchina ◽  
Liljana Ugrinova ◽  
Vasil Karcev ◽  
Aleksandra Grozdanova
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
Quality Standards ◽  
Quality System ◽  
Quality Systems ◽  
High Quality ◽  
Iso Standard ◽  
Continuous Quality ◽  
Medicinal Use

In 2015, in Republic of North Macedonia, a new law for narcotics has been adopted, where the changes include legal cultivation of cannabis for medicinal use as well as legal production of cannabis extracts for medicinal use. In order to gain high quality of cannabis and cannabis products for medicinal use and to meet some quality standards that will guarantee consistency, traceability and continuous quality of the product, it is necessary to implement Quality Systems. Good quality system is ISO standard system but for cannabis for medicinal use, GACP, GMP and GLC standards are used more often. Production of cannabis for medicinal use consists of: process of cultivation where GACP standards are applicable, primary processing where GMP standards are the most important and quality control of final product regulated with GLP standard. In this review, explanation of these standards as well as overview of modes of their implementation has been made. Keywords: GxP, GMP, GACP, GLP

Sign in / Sign up

Export Citation Format

Share Document