Developmental Characterization of Tail Movements in the Appendicularian Urochordate Oikopleura dioica

2015 ◽  
Vol 86 (3-4) ◽  
pp. 191-209 ◽  
Author(s):  
Orsolya Kreneisz ◽  
Joel C. Glover

Using high-speed video cinematography, we characterized kinematically the spontaneous tail movements made by the appendicularian urochordate Oikopleura dioica. Videos of young adult (1-day-old) animals discriminated 4 cardinal movement types: bending, nodding, swimming and filtering, each of which had a characteristic signature including cyclicity, event or cycle duration, cycle frequency, cycle frequency variation, laterality, tail muscle segment coordination and episode duration. Bending exhibited a more common, unilateral form (single bending) and a rarer, bilateral form (alternating bending). Videos of developing animals showed that bending and swimming appeared in rudimentary form starting just after hatching and exhibited developmental changes in movement excursion, duration and frequency, whereas nodding and filtering appeared in the fully mature form in young adults at the time of first house production. More complex behaviors were associated with inflating, entering and exiting the house. We also assessed the influence of descending inputs by separating the tail (which contains all muscles and most likely the neural circuits that generate most motor outputs) from the head. Isolated tails spontaneously generated either bending or swimming movements in abnormally protracted episodes. This together with other observations of interactions between bending and swimming behaviors indicates the presence of several types of descending inputs that regulate the activity of the pattern generating circuitry in the tail nervous system.

2015 ◽  
Vol 24 (10) ◽  
pp. 108506
Author(s):  
Qing-Tao Chen ◽  
Yong-Qing Huang ◽  
Jia-Rui Fei ◽  
Xiao-Feng Duan ◽  
Kai Liu ◽  
...  

1970 ◽  
Vol 43 (6) ◽  
pp. 1332-1339 ◽  
Author(s):  
J. K. Clark ◽  
R. A. Scott

Abstract Dissolution of sulfur-cured, carbon black-loaded copolymers and their blends with cis-1,4-polybutadiene (PBD) are brought about by boiling with o-dichlorobenzene which contains a small amount of 2,2′-dibenzamidodiphenyl disulfide. The resulting slurries are subjected to a sequence of separations which include high-speed centrifugation to remove solids, and solvent precipitation followed by filtration to isolate the precipitates. The precipitates are washed with solvent to remove soluble organic materials followed by carbon disulfide washing to dissolve the polymers. Cast films of the polymers are obtained by evaporating the carbon disulfide washings onto sodium chloride discs. The infrared spectra of the cast films of these preparations are very similar to those of their respective polymers prior to loading and curing. Calculations for relative concentrations of bound styrene and PBD micro-structures permit nominal identification of the kinds of styrene-butadiene rubber and the amounts of cis-1,4-PBD used in a cured rubber formulation. Absorption bands used are near 3.35 μ for cis-1,4-PBD, 6.65 μ for bound styrene, 10.35 μ for trans-1,4-PBD; and 11.0 μ for vinyl-1,2-PBD. Efforts are being made to improve the data by using a grating infrared instrument and also to extend the calibrations to include other rubber blends.


2016 ◽  
Vol 23 (5) ◽  
pp. 1110-1117 ◽  
Author(s):  
M. V. Vitorino ◽  
Y. Fuchs ◽  
T. Dane ◽  
M. S. Rodrigues ◽  
M. Rosenthal ◽  
...  

A compact high-speed X-ray atomic force microscope has been developed forin situuse in normal-incidence X-ray experiments on synchrotron beamlines, allowing for simultaneous characterization of samples in direct space with nanometric lateral resolution while employing nanofocused X-ray beams. In the present work the instrument is used to observe radiation damage effects produced by an intense X-ray nanobeam on a semiconducting organic thin film. The formation of micrometric holes induced by the beam occurring on a timescale of seconds is characterized.


2011 ◽  
Vol 320 ◽  
pp. 196-201
Author(s):  
Fei Tang ◽  
Li Jia Wen

Rotating cavitation is one of the most important problems in the development of modern high performance rocket pump inducers. In this paper, a numerical simulation of rotating cavitation phenomenon in a 2D blade cascade of liquid rocket engine inducer was carried out using a mixture model based on Rayleigh-Plesset equation. The purpose is to investigate the characterization of rotating cavitation in a high speed inducer. The results show that when sub-synchronous rotating cavitation occurs, the speed for the length of the blade surface cavitation is lower than the speed frequency of rotation shaft with the same direction. The external aspect is that the pressure at the upstream of blades changes synchronous. Thus, the generation of sub-synchronous rotating cavitation is closely related to the changes of flow angel which caused by the flow fluctuations. Hence, elimination of the flow rate redistribution among the flow channel can effectively suppress the occurrence of this phenomenon.


Sign in / Sign up

Export Citation Format

Share Document