scholarly journals Path Planning for Excavator Arm: Fuzzy Logic Control Approach

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Nga Thi-Thuy Vu ◽  
Nam Phuong Tran

This paper proposes an algorithm to design the path for automated excavator arm. The path designing is divided into two phases. Firstly, the fuzzy logic technique is used to determine the change of the path to adapt with the variation of the material after each digging period. Secondly, the B-spline algorithm is used to build the optimal trajectory. By this, the excavator can maximize the dug weight although the shape of the material is variation. The effectiveness of the algorithm is verified through computer simulation and real-time experiment. The simulation and experimental results show that the generated optimal path keeps the dug weight around the expected value regardless of the change of the environment.

Author(s):  
Mohd Avesh ◽  
Rajeev Srivastava ◽  
Rakesh Chandmal Sharma ◽  
Neeraj Sharma

The study deals with the light passenger vehicle suspension system design to improve the ride quality. The fuzzy logic control approach is applied to the half car suspension system model by adjusting the control parameters and properties using online adaptation with a minimized cost function and reduced hardware complexity. The performance of resulting model is tested under the influence of trapezoidal and triangular membership functions using the 9, 25 and 49 rules-set. The controller robustness is observed at different performance indices. Road excitations in the form of disturbance input are modelled as the sinusoidal function of a speed bump to reveal the transient response of the automotive body. Ultimately, the performance of active suspension system has been improved in terms of displacement and acceleration of seat, heave, pitch, and roll by the application of proposed fuzzy logic controller. Results reported that the trapezoidal shape 25 rules set membership function based fuzzy logic controller gives the best performance between the investigated systems.


2017 ◽  
Vol 89 ◽  
pp. 95-109 ◽  
Author(s):  
Azzeddine Bakdi ◽  
Abdelfetah Hentout ◽  
Hakim Boutami ◽  
Abderraouf Maoudj ◽  
Ouarda Hachour ◽  
...  

2012 ◽  
Vol 457-458 ◽  
pp. 998-1001
Author(s):  
Qiu Hua Miao ◽  
Pei Gang Jiao ◽  
Jie Liang

In this paper fuzzy logic control is introduced in auto adjust control system of air in bus. Fuzzy controller employs fuzzy control model of two inputs and one output. The paper also introduces the hardware framework, working principle and software of the system, analyzing merits of fuzzy logic technique, putting emphasis on the design of the fuzzy controller. In the controlling process, fuzzy controller samples temperature signal in bus and calculate deflection and deflection rate of temperature, looks up corresponding output in controlling table, and calculates its precision, then fuzzy controller gives related signal to motors and valve, acquiring satisfactory effect.


Sign in / Sign up

Export Citation Format

Share Document