scholarly journals Experimental Investigation of Isothermal Section of the B-Cr-Fe Phase Diagram at 1353 K

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Viera Homolová ◽  
Lucia Čiripová
Keyword(s):  
Isothermal Section ◽  
Ternary Phase ◽  
Fe Model ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Third ◽  
Coexisting Phases ◽  
Scanning Electron

The isothermal section of the B-Cr-Fe ternary system was studied experimentally at 1353 K. X-ray diffraction and scanning electron microscopy equipped with EDX analyzer were used for determination of phase equilibria and composition of the coexisting phases in the B-Cr-Fe model alloys after long-term annealing (1500–2205 h). Two iron borides FeB and Fe2B, six chromium borides Cr2B, Cr5B3, CrB, Cr3B4, CrB2, and CrB4 and also iron and chromium solid solutions (α(Fe,Cr), α(Cr,Fe), γ(Fe,Cr)) and β-rhombohedral B were observed in the alloys. High solubilities of the third element in binary borides and no ternary phase were found. Based on the experimental results, isothermal section of the B-Cr-Fe system at 1353 K was determined.

Sem and X-Ray Analysis of Renal and Biliary Calculi

1976 ◽  
Vol 34 ◽  
pp. 306-307
Author(s):  
R. J. Narconis ◽  
G. L. Johnson
Keyword(s):  
Chemical Constituents ◽  
Natural State ◽  
X Ray Diffraction ◽  
Chemical Methods ◽  
X Ray ◽  
Additional Dimension ◽  
Biliary Calculi ◽  
Calculus Formation ◽  
Scanning Electron

Analysis of the constituents of renal and biliary calculi may be of help in the management of patients with calculous disease. Several methods of analysis are available for identifying these constituents. Most common are chemical methods, optical crystallography, x-ray diffraction, and infrared spectroscopy. The application of a SEM with x-ray analysis capabilities should be considered as an additional alternative.A scanning electron microscope equipped with an x-ray “mapping” attachment offers an additional dimension in its ability to locate elemental constituents geographically, and thus, provide a clue in determination of possible metabolic etiology in calculus formation. The ability of this method to give an undisturbed view of adjacent layers of elements in their natural state is of advantage in determining the sequence of formation of subsequent layers of chemical constituents.

The Roman Ceramics of Salobrena (Granada-Spain) and their Raw Materials

1992 ◽  
Vol 267 ◽  
Author(s):  
Ana M De Andres ◽  
Isabel MuÑOZ
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Raw Materials ◽  
Third Century ◽  
Western Coast ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Third ◽  
Good Number ◽  
Scanning Electron

ABSTRACTNineteen roman ceramic sherds found near Salobreña (Granada, Spain), in the western coast of the Mediterranean Sea, as well as different ceramic clays from the surroundingsare studied. Both clays and ceramic sherds are characterizad by X-ray diffraction and spectrometry, differential thermal analysis, and scanning electron and optical microscopies. A good number of the ceramic pieces, among which some “Terrae Sigillatae”, have a composition similar to that of the local clays and, thus, have been probably manufactured at Salobreña. Only a few of them have a foreign origin. For most of them, the firing temperature was about 800-850 °C, although some have been produced at 900-1000 °C, and some others at 1000-1100 °C. It is concluded that Salobreña appearsto have been an important settlement just in the third century of the Christian era.

scholarly journals Supplementary X-ray studies of the Ni-Sn-Bi system

2007 ◽  
Vol 43 (2) ◽  
pp. 141-150 ◽  
Author(s):  
G.P. Vassilev ◽  
K.I. Lilova ◽  
J.C. Gachon
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Phase Equilibria ◽  
Ternary Compound ◽  
Approximate Formula ◽  
Ternary Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Peaks ◽  
Scanning Electron

Phase equilibria were studied in the system Ni-Sn-Bi. Special attention has been paid to the identification of the recently found ternary phase. For this purpose samples were synthesized using intimately mixed powders. After annealing and quenching, all alloys were analyzed by scanning electron microscope and by X-ray diffraction. The results give evidences about the existence of a ternary compound with approximate formula Ni6Sn2Bi to Ni7Sn2Bi. Overlapping of some neighboring diffraction peaks of this phase with NiBi and Ni3Sn_LT is the reason for the difficulties related to the X-ray diffraction identification of the ternary phase.

600°C Isothermal Section of the Zn-Fe-Nb Ternary System at the Zn-Rich Corner

2011 ◽  
Vol 391-392 ◽  
pp. 1210-1214
Author(s):  
Hao Tu ◽  
Xin Ming Wang ◽  
Ya Liu ◽  
Chang Jun Wu ◽  
Jian Hua Wang ◽  
...  
Keyword(s):  
Isothermal Section ◽  
Ternary System ◽  
Diffusion Couple ◽  
Ternary Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Eds Analysis ◽  
Δ Phase

The isothermal section of the Fe-Zn-Nb ternary system at 600 oC was determined using the equilibrated alloys with the aid of diffusion couple approach. The specimens were investigated by means of SEM-EDS analysis, SEM-WDS analysis and X-ray diffraction. A true ternary phase T was identified, this phase is in equilibrium with ε, NbZn3, Γ, δ, and η - Zn phases respectively in the system. The solubility of Nb in η - Zn and δ phase is limited and that of Zn in ε is up to 10.0%.

scholarly journals Phase Equilibria in the Nb-Rich Region of Al-Nb-Sn at 900 and 1200 °C

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2759 ◽  
Author(s):  
Ioannis Papadimitriou ◽  
Claire Utton ◽  
Panos Tsakiropoulos
Keyword(s):  
Crystal Structure ◽  
Phase Equilibria ◽  
Ternary Phase ◽  
X Ray Diffraction ◽  
High Solubility ◽  
Rich Region ◽  
X Ray ◽  
Heat Treated ◽  
Aero Engine ◽  
Scanning Electron

The Al-Nb-Sn phase diagram was studied experimentally in the Nb-rich region to provide important phase equilibria information for alloy design of Nb-silicide based materials for aero engine applications. Three alloys were produced: Nb-17Al-17Sn, Nb-33Al-13Sn and Nb-16Al-20Sn (at.%). As-cast and heat-treated alloys (900 and 1200 °C) were analysed using XRD (X-ray diffraction) and SEM/EDS (scanning electron microscopy/ electron dispersive x-ray spectroscopy). Tin showed a high solubility in Nb2Al, reaching up to 21 at.% in the Sn-rich areas, substituting for Al atoms. Tin and Al also substituted for each other in the A15 phases (Nb3Al and Nb3Sn). Tin showed limited solubility in NbAl3, not exceeding 3.6 at.% as it substituted Al atoms. The solubility of Al in NbSn2 varied from 4.8 to 6.8 at.%. A ternary phase, Nb5Sn2Al with the tI32 W5Si3 crystal structure, was found to be stable. This phase was observed in the 900 °C heat-treated samples, but not in the 1200 °C heated samples.

Study of an Energetic-oxidant Co-crystal: Preparation, Characterisation, and Crystallisation Mechanism

2017 ◽  
Vol 67 (5) ◽  
pp. 510 ◽  
Author(s):  
Han Gao ◽  
Wei Jiang ◽  
Jie Liu ◽  
Gazi Hao ◽  
Lei Xiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Diffraction Spectrum ◽  
Solvent Evaporation Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

<p>An energetic co-crystal consisting of the most promising military explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) and the most well-known oxidant applied in propellants ammonium perchlorate has been prepared with a simple solvent evaporation method. Scanning electron microscopy revealed that the morphology of co-crystal differs greatly from each component. The X-ray diffraction spectrum, FTIR, Raman spectra, and differential scanning calorimetry characterisation further prove the formation of the co-crystal. The result of determination of hygroscopic rate indicated the hygroscopicity was effectively reduced. At last, the crystallisation mechanism has been discussed.</p>

X-Ray Diffraction Determination of the Effect of Passivations on Stress in Patterned Lines of Tungsten

1994 ◽  
Vol 338 ◽  
Author(s):  
L. Maniguet ◽  
M. Ignat ◽  
M. Dupeux ◽  
J.J. Bacmann ◽  
Ph. Normandon
Keyword(s):  
Tensile Stress ◽  
Line Width ◽  
Intrinsic Stress ◽  
X Ray Diffraction ◽  
Metal Line ◽  
X Ray ◽  
The Third ◽  
Diffraction Determination ◽  
Strain Tensors

ABSTRACTThe determination by X-ray diffraction of the elastic strain tensors and the corresponding stress tensors in patterned lines of tungsten has been performed to investigate the effect of various passivation. For unpassivated lines, the stresses are biaxial and decrease with decreasing line width. Passivation over patterned lines results in triaxial tensile stress. The stress along the line is not changed by the passivation. The stress across the line decreases as the line width decreases. The third component of stress, perpendicular to the surface, which appears with the passivation, increases with decreasing line width. High compressive intrinsic stress in the passivation does not result in high tensile stress in the metal line.

scholarly journals A new ternary compound with the BGa8Ir4 structure type in the Al–Au–Ir system

2019 ◽  
Vol 75 (1) ◽  
pp. 49-52
Author(s):  
Joris Kadok ◽  
Marie-Cécile de Weerd ◽  
Pascal Boulet ◽  
Vincent Fournée ◽  
Julian Ledieu
Keyword(s):  
Crystal Structure ◽  
Ternary Phase ◽  
Structure Type ◽  
Gold Content ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tetragonal Crystal ◽  
Pearson Symbol ◽  
Tetragonal Crystal System

Following the recent determination of the Al3AuIr structure, a new ternary phase has been identified in the Al–Au–Ir phase diagram. It has a chemical composition Al9(Au;Ir)4 with an apparently low gold content. Its crystal structure has been determined with single-crystal X-ray diffraction. The new compound crystallizes in the tetragonal crystal system and has been successfully solved in space group I41/acd (Pearson symbol tI104) with lattice parameters a = 8.6339 (2) and c = 21.8874 (7) Å. Atomic environments are described as well as similarities with the BGa8Ir4 compound.

Sign in / Sign up

Export Citation Format

Share Document