scholarly journals Strength and Deformability of Fiber Reinforced Cement Paste on the Basis of Basalt Fiber

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Yury Barabanshchikov ◽  
Ilya Gutskalov
Keyword(s):  
Crack Resistance ◽  
Cement Paste ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Fiber Reinforced ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Particulate Reinforcement ◽  
Reinforced Cement ◽  
Basaltic Fiber

The research object of the paper is cement paste with the particulate reinforcement of basalt fiber. Regardless of fibers’ length at the same fiber cement mix workability and cement consumption equality compressive solidity of the specimens is reduced with increasing fiber content. This is due to the necessity to increase the water-cement ratio to obtain a given workability. The flexural stability of the specimens with increasing fiber content increments in the same conditions. There is an optimum value of the fibers’ dosage. That is why stability has a maximum when crooking. The basaltic fiber particulate reinforcement usage can abruptly increase the cement paste level limiting extensibility, which is extremely important in terms of crack resistance.

scholarly journals Effect of water/cement ratio on micro-nanomechanical properties of the interface between cementitious matrix and steel microfibers in ultra-high performance cementitious composites

2021 ◽  
Vol 14 (4) ◽  
Author(s):  
Vanessa Fernandes Cesari ◽  
Fernando Pelisser ◽  
Philippe Jean Paul Gleize ◽  
Milton Domingos Michel
Keyword(s):  
Transition Zone ◽  
Cement Paste ◽  
Calcium Silicate ◽  
High Performance ◽  
Calcium Silicate Hydrate ◽  
Interfacial Transition Zone ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Nanomechanical Properties ◽  
Cementitious Matrix

abstract: Ultra-high performance concretes with steel microfibers have been studied in depth with the aim of producing more efficient and durable structures. The performance of these materials depends on the characteristics of the interface between microfibers and cementitious matrix. This research investigates the micro-nanomechanical properties of the interfacial transition zone between the steel microfibers and the matrix of ultra-high performance cementitious composite. The effect of the water/cement ratio and distance from the microfiber were analyzed. The results confirm the formation of high-density calcium-silicate-hydrate (HD C-S-H) matrix at higher concentrations than low-density calcium-silicate-hydrate (LD C-S-H) for w/c ratios of 0.2 and 0.3. The properties in cementitious matrix interface with steel microfibers were very similar to that measured for the cement paste, and no significant difference was observed regarding the distance to the microfibers in relation to the elastic modulus, hardness and chemical composition. Thus, the authors can conclude that the formation of a less resistant region does not occur at the interfacial transition zone cement paste/microfibers.

scholarly journals Evaluation of the Effect of Fiber Type, Length, and Content on Asphalt Properties and Asphalt Mixture Performance

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1556 ◽  
Author(s):  
Fucheng Guo ◽  
Rui Li ◽  
Shuhua Lu ◽  
Yanqiu Bi ◽  
Haiqi He
Keyword(s):  
Fiber Length ◽  
Fiber Type ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Temperature Stability ◽  
Fiber Content ◽  
Engineering Properties ◽  
Fiber Reinforced ◽  
High Temperature Stability

Fiber-reinforced asphalt mixture has been widely used in pavement engineering to not only prevent asphalt binder leakage but also improve engineering properties of asphalt mixture. However, the research on three key parameters, namely fiber type, fiber length, and fiber content, which significantly affect the performance of fiber-reinforced asphalt mixture, have seldom been conducted systematically. To determine these three key parameters in the support of the application of fibers in mixture scientifically, three commonly used fibers were selected, basalt fiber, polyester fiber, and lignin fiber, and the testing on fibers, fiber-reinforced asphalt binders, and fiber-reinforced asphalt mixtures was conducted afterwards. The results showed: the favorable fiber type was basalt fiber; the favorable basalt fiber length was 6mm; the engineering properties including high temperature stability, low temperature crack resistance, and water susceptibility were clearly improved by the added basalt fiber, and the optimum basalt fiber content was 0.4 wt.%. The obtained results may be valuable from a practical point of view to engineers and practitioners.

Microstructure of High Strength Cement Paste Systems

1984 ◽  
Vol 42 ◽  
Author(s):  
M. Regourd
Keyword(s):  
Cement Paste ◽  
Ultrafine Particles ◽  
High Strength ◽  
Interfacial Bond ◽  
Cement Pastes ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Composite Systems ◽  
Crystalline Hydrates ◽  
Low Porosity

AbstractHigh strength cement pastes include hot pressed, autoclaved, impregnated low water/cement ratio, macrodefect free, ultrafine particles arrangement systems. The densification of the microstrucure is mainly related to a low porosity and to the formation of poorly crystalline hydrates. In composite systems like mortars and concretes, the interfacial bond between the cement paste and aggregates is moreover less porous and more finely crystallized than the normal “auréole de transition”.

scholarly journals Crack Resistance and Mechanical Properties of Polyvinyl Alcohol Fiber-Reinforced Cement-Stabilized Macadam Base

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Yi Zhao ◽  
Xuan Yang ◽  
Qingyu Zhang ◽  
Naixing Liang ◽  
Yangkai Xiang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polyvinyl Alcohol ◽  
Crack Resistance ◽  
Fiber Length ◽  
Cement Content ◽  
Strength Test ◽  
Fiber Reinforced ◽  
Polyvinyl Alcohol Fiber ◽  
Reinforced Cement ◽  
Shrinkage Property

A series of tests were carried out to evaluate crack resistance and mechanical properties of polyvinyl alcohol fiber-reinforced cement-stabilized macadam, which is widely used as pavement base or subbase composite material. Three series of cement-stabilized macadam mixtures with cement content of 3.2%, 3.6%, and 4.0% were prepared by incorporating four various contents (0, 0.6, 0.9, and 1.2 kg/m3) and lengths (12, 18, 24, and 30 mm) of polyvinyl alcohol fiber. The optimum polyvinyl alcohol fiber content, fiber length, and cement content were determined based on the mechanical properties of cement-stabilized macadam mixtures. Then, unconfined compressive strength test, compressive resilience modulus test, splitting strength test, flexural tensile strength test, drying shrinkage test, and temperature shrinkage test were carried out in this study. The results show that polyvinyl alcohol fiber-reinforced cement-stabilized prepared by optimum proportions (cement 3.6%, fiber content 0.9 kg/m3, and fiber length 24 mm) has good crack resistance. The incorporation of polyvinyl alcohol fiber can effectively improve compressive strength and splitting strength, while its effect on CRM of cement-stabilized macadam is not remarkable. The anti-dry-shrinkage property and anti-temperature-shrinkage property of the specimens are also drastically improved due to the reinforcement effect of polyvinyl alcohol fiber. Moreover, the crack resistance index is proposed to evaluate the crack resistance of materials. The crack resistance of PVA fiber-reinforced cement-stabilized macadam prepared by optimum proportions is improved by 44.4%. Consequently, the mechanical properties and crack resistance of cement-stabilized macadam are obviously improved by adding polyvinyl alcohol fiber.

Investigation on mechanical properties and failure mechanisms of basalt fiber reinforced aluminum matrix composites under different loading conditions

2017 ◽  
Vol 52 (14) ◽  
pp. 1907-1914 ◽  
Author(s):  
Yang Zhiming ◽  
Liu Jinxu ◽  
Feng Xinya ◽  
Li Shukui ◽  
Xu Yuxin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Failure Mechanisms ◽  
Basalt Fiber ◽  
Aluminum Matrix ◽  
Fiber Content ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Static Compression

Basalt fiber reinforced aluminum matrix composites with different fiber contents (i.e. 0 wt%, 10 wt%, 30 wt% and 50 wt%) were prepared by hot-press sintering. Microstructure analysis indicates that basalt fibers are uniformly distributed in 10% basalt fiber reinforced aluminum matrix composite. The interfacial bonding between basalt fibers and aluminum matrix is good, and there is no interface reaction between basalt fiber and aluminum matrix. Quasi-static tensile, quasi-static compression and dynamic compression properties of basalt fiber reinforced aluminum composites were studied, and the influences of basalt fiber content on mechanical properties were discussed. Meanwhile, the failure mechanisms of basalt fiber reinforced aluminum matrix composites with different fiber content were analyzed.

Basalt Fiber Reinforce Cement-Based Composite Materials

2011 ◽  
Vol 374-377 ◽  
pp. 1837-1842
Author(s):  
Ming Tang ◽  
Jing Qi Li ◽  
Hong Liang Liu ◽  
Ning Chen
Keyword(s):  
Composite Materials ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Basalt Fiber ◽  
Physical And Mechanical Properties ◽  
Alkali Resistance ◽  
Orthogonal Experimental Design ◽  
Enhancement Effect ◽  
Cement Ratio ◽  
Water Cement Ratio

In order to obtain the high performance cement-based consistent materials，the enhancement effect of basalt fiber was studied to develop the building mortar with a high flexural strength . Three factors such as basalt fibers fraction，water-cement ratio and sand-lime ratio are studied on compressive and flexural strength on 7 days and 28 days through the orthogonal experimental design and statistical analysis. According to project needs, the best combination of flexural strength is optimized. The enhancement mechanism and damage features are analyzed and evaluated by SEM, the result shows that the basalt fiber as enhanced component have a very good flexural strength enhancement effect, the maximum increased rate will reach 2.91 times. The effect on the strength of different age period is remarkable with different fiber fraction which is far greater than the water-cement ratio and sand-lime ratio. Basalt fiber have better physical and mechanical properties and better alkali resistance, some performance are second only to carbon fiber, and the cost of basalt fiber is far lower than carbon fiber, So the basalt fiber have a broad application prospects in the field of cement-based composite materials.

Evaluation of initial setting time due to superplasticizers

2017 ◽  
Vol 8 (2) ◽  
pp. 65
Author(s):  
Abhishek Singh ◽  
Shobha Ram ◽  
Alok Verma
Keyword(s):  
Water Content ◽  
Cement Paste ◽  
Setting Time ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Initial Setting Time ◽  
Initial Setting

This paper shows how polycarboxylate based superplasticizer affects the initial setting time of cement paste. Three superplasticizers are used in this study with different properties and aiming to determine the delay in initial setting time due to superplasticizer. Initial setting time is calculated as per IS: 4031-PART 5-1988 with different SP dosages (0.5%, 0.75%, 1.0% and 1.5% of weight of cement). Superplasticizer is an admixture which reduces the water-cement ratio or increase the workability at the same water content. This paper deals with the evaluation of initial setting time due to superplasticizers.

Prediction of Elastic Modulus of Cement-Based Materials Based on Power’s Volume Model

2012 ◽  
Vol 253-255 ◽  
pp. 474-477 ◽  
Author(s):  
Lang Wu ◽  
Bing Yan ◽  
Bin Lei
Keyword(s):  
Elastic Modulus ◽  
Elastic Properties ◽  
Cement Paste ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Micromechanics Model ◽  
Volume Model ◽  
Cement Based Materials ◽  
Hydrated Products ◽  
Multi Phase

The hydrated products, unhydrated cement and water (capillary pores) in the cement paste are seen as matrix, inclusion, Equivalent medium respectively, We used the micromechanics theories and Power’s Volume model to develop a multi-phase micromechanics model capable of simulating the elastic properties of cement-based materials, and the evolution of elastic properties in the hydration process was calculated at different water-cement ratio. The final experimental results show that this model can be used to predict the elastic properties of cement-based materials.

Effect of Polypropylene Fiber on the Properties of Cement Mortar

2014 ◽  
Vol 919-921 ◽  
pp. 1903-1907
Author(s):  
Jun Pan ◽  
Fei Li ◽  
Xue Wu Zhang
Keyword(s):  
Reinforced Concrete ◽  
Fly Ash ◽  
Cement Mortar ◽  
Polypropylene Fiber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Types ◽  
Fiber Reinforced ◽  
Bending Tests ◽  
Reinforced Cement

This thesis discusses the influence of fly ash content, fiber content and fiber types on the performance of fiber reinforced concrete, through the flexural and compressive tests on fiber reinforced cement mortar, and the splitting tensile and bending tests on the fiber reinforced concrete. The test result shows that the adding of fly ash can better play the enhancement of polypropylene fiber; the change of the fiber content affects the flexural strength of cement mortar and obviously improves the splitting tensile strength of the reinforced concrete; and the polypropylene fiber and steel fiber have different enhancement on cement mortar due to their qualitative differences.

Sign in / Sign up

Export Citation Format

Share Document