scholarly journals Development and Characterization of an Electroless Plated Silver/Cysteine Sensor Platform for the Electrochemical Determination of Aflatoxin B1

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Alex Paul Wacoo ◽  
Mathew Ocheng ◽  
Deborah Wendiro ◽  
Peter California Vuzi ◽  
Joseph F. Hawumba
Keyword(s):  
Cyclic Voltammetry ◽  
Horseradish Peroxidase ◽  
Electroless Deposition ◽  
Limit Of Detection ◽  
Electrochemical Determination ◽  
Sensor Platform ◽  
Ft Ir ◽  
Aflatoxin B

An electroless plated silver/cysteine sensor platform [Glass|silver|cysteine|aflatoxin B1|horseradish peroxidase] for the Electrochemical detection of aflatoxin B1was developed and characterized. This involved four major steps: (1) an electroless deposition of silver (plating) onto a glass slide, (2) immobilization of cysteine; (3) conjugation of aflatoxin B1to cysteine groups; and (4) blocking of free cysteine groups with horseradish peroxidase (HRP). The binding of cysteine to the silver was demonstrated by the disappearance of thiol (S-H) groups at 2500 cm−1using Fourier transmittance infrared spectra (FT-IR), while the subsequent steps in the assembly of sensor platform were monitored using both FT-IR and cyclic voltammetry, respectively. The sensor platform exhibited a broadened nonsymmetrical redox couple as indicated by cyclic voltammetry. The platform was further characterized for sensitivity and limit of detection. The indirect competitive immunoassay format, whereby free and immobilized aflatoxin B1on the sensor competed for the binding site of free anti-aflatoxin B1antibody, was used at various concentrations of aflatoxin B1. The sensor generated differential staircase voltammogram that was inversely proportional to the concentration of aflatoxin B1and aflatoxin B1in the range of 0.06–1.1 ng/mL with a detection limit of 0.08 ng/mL could be detected.

scholarly journals Corrigendum to “Development and Characterization of an Electroless Plated Silver/Cysteine Sensor Platform for the Electrochemical Determination of Aflatoxin B1”

2020 ◽  
Vol 2020 ◽  
pp. 1-2
Author(s):  
Alex Paul Wacoo ◽  
Mathew Ocheng ◽  
Deborah Wendiro ◽  
Peter California Vuzi ◽  
Joseph F. Hawumba
Keyword(s):  
Aflatoxin B1 ◽  
Electrochemical Determination ◽  
Sensor Platform

Electrochemically Synthesis and Characterization of Copolymers Based on 1, 4-Diethoxybenzene and 3, 4-Ethylenedioxythiophene

2011 ◽  
Vol 335-336 ◽  
pp. 989-993
Author(s):  
Mi Ouyang ◽  
Zhen Wei Yu ◽  
Yi Xu ◽  
Yu Jian Zhang ◽  
Cheng Zhang
Keyword(s):  
Cyclic Voltammetry ◽  
Ir Spectroscopy ◽  
Feed Ratio ◽  
Synthesis And Characterization ◽  
Monomer Mixture ◽  
Long Wavelength ◽  
H Nmr ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Copolymers based on 1, 4-diethoxybenzene (DEB) and 3, 4-ethylenedioxythiophene (EDOT) were electrochemically synthesized and characterized. The structures of the copolymers were established by 1H NMR and FT-IR spectroscopy. The results indicated the final product was a copolymer instead of a blend or a composite. The physical properties were systematically investigated by cyclic voltammetry, UV-vis absorption and fluorescence. The PL maximum of copolymers presented obviously red-shift to long wavelength as the feed ratio of EDOT in monomer mixture increased.

scholarly journals An Electrochemical Sensor Based On Graphite Electrode Modified With Silica Containing 1-N-Propyl-3-Methylimidazolium Species For Determination Of Ascorbic Acid

2019 ◽  
Vol Vol. 14, No.1 ◽  
pp. 5-14 ◽  
Author(s):  
Anastasiya Tkachenko ◽  
Mykyta Onizhuk ◽  
Oleg Tkachenko ◽  
Leliz T. Arenas ◽  
Edilson V. Benvenutt ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Cyclic Voltammetry ◽  
Electrochemical Sensor ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Differential Pulse ◽  
Long Term Stability ◽  
Diffusion Limited

In the present study, an electrochemical sensor based on the electrode (SiMImCl/C) consisting of graphite and silica, grafted with 1-n-propyl-3-methylimidazolium chloride was used for ascorbic acid (AA) quantification in pharmaceuticals and food formulations. Cyclic voltammetry and electrochemical impedance spectroscopy were applied for electrochemical characterization of the SiMImCl/C electrode. The cyclic voltammetry study revealed that the oxidation of AA on this electrode is an irreversible process, realized by adsorption and diffusion limited step. The differential pulse voltammetry was applied to develop a procedure for the AA determination. The linear range was found to be 0.3–170 μmol L-1 and the limit of detection – 0.1 μmol L-1. The proposed SiMImCl/C electrode has long term stability and does not show electrochemical activity towards the analytes, which commonly coexist with AA. The sensor was successfully used for quantification of AA in food and pharmaceutical formulations.

scholarly journals Zinc/Aluminium–Quinclorac Layered Nanocomposite Modified Multi-Walled Carbon Nanotube Paste Electrode for Electrochemical Determination of Bisphenol A

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 941 ◽  
Author(s):  
Rahadian Zainul ◽  
Nurashikin Abd Azis ◽  
Illyas Md Isa ◽  
Norhayati Hashim ◽  
Mohamad Syahrizal Ahmad ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Bisphenol A ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Electrochemical Determination ◽  
Multiwalled Carbon ◽  
Baby Bottle ◽  
Double Hydroxide ◽  
Paste Electrode

This paper presents the application of zinc/aluminium-layered double hydroxide-quinclorac (Zn/Al-LDH-QC) as a modifier of multiwalled carbon nanotubes (MWCNT) paste electrode for the determination of bisphenol A (BPA). The Zn/Al-LDH-QC/MWCNT morphology was examined by a transmission electron microscope and a scanning electron microscope. Electrochemical impedance spectroscopy was utilized to investigate the electrode interfacial properties. The electrochemical responses of the modified electrode towards BPA were thoroughly evaluated by using square-wave voltammetry technique. The electrode demonstrated three linear plots of BPA concentrations from 3.0 × 10−8–7.0 × 10−7 M (R2 = 0.9876), 1.0 × 10−6–1.0 × 10−5 M (R2 = 0.9836) and 3.0 × 10−5–3.0 × 10−4 M (R2 = 0.9827) with a limit of detection of 4.4 × 10−9 M. The electrode also demonstrated good reproducibility and stability up to one month. The presence of several metal ions and organic did not affect the electrochemical response of BPA. The electrode is also applicable for BPA determination in baby bottle and mineral water samples with a range of recovery between 98.22% and 101.02%.

scholarly journals A label-free biosensor based on graphene and reduced graphene oxide dual-layer for electrochemical determination of beta-amyloid biomarkers

2020 ◽  
Vol 187 (5) ◽  
Author(s):  
Jagriti Sethi ◽  
Michiel Van Bulck ◽  
Ahmed Suhail ◽  
Mina Safarzadeh ◽  
Ana Perez-Castillo ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Limit Of Detection ◽  
Electrochemical Techniques ◽  
Differential Pulse ◽  
Electrochemical Determination ◽  
Label Free ◽  
Reduced Graphene ◽  
Electrochemically Reduced Graphene Oxide

AbstractA label-free biosensor is developed for the determination of plasma-based Aβ1–42 biomarker in Alzheimer’s disease (AD). The platform is based on highly conductive dual-layer of graphene and electrochemically reduced graphene oxide (rGO). The modification of dual-layer with 1-pyrenebutyric acid N-hydroxysuccinimide ester (Pyr-NHS) is achieved to facilitate immobilization of H31L21 antibody. The effect of these modifications were studied with morphological, spectral and electrochemical techniques. The response of the biosensor was evaluated using differential pulse voltammetry (DPV). The data was acquired at a working potential of ~ 180 mV and a scan rate of 50 mV s−1. A low limit of detection (LOD) of 2.398 pM is achieved over a wide linear range from 11 pM to 55 nM. The biosensor exhibits excellent specificity over Aβ1–40 and ApoE ε4 interfering species. Thus, it provides a viable tool for electrochemical determination of Aβ1–42. Spiked human and mice plasmas were used for the successful validation of the sensing platform in bio-fluidic samples. The results obtained from mice plasma analysis concurred with the immunohistochemistry (IHC) and magnetic resonance imaging (MRI) data obtained from brain analysis.

A Facile In-Situ Development of L-Valine Film onto the Surface of Carbon Paste Electrode Towards the Detection of Environmentally Hazardous 4-Amino Phenol

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
T. Venu Gopal ◽  
Tukiakula Madhusudana Reddy ◽  
P. Shaikshavali ◽  
G. Venkataprasad ◽  
P. Gopal
Keyword(s):  
Cyclic Voltammetry ◽  
Carbon Paste Electrode ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Small Scale ◽  
Carbon Paste ◽  
Relative Standard ◽  
Paste Electrode

Abstract A small scale of environmentally hazardous 4-aminophenol can show significant impact on human health. Hence, in the present work, we have designed L-Valine film (Vf) modified carbon paste electrode (Vf/CPE) for the determination of 4-aminophenol. Herein, a facile in-situ L-Valine film was developed by electrochemical polymerization method onto the surface of bare carbon paste electrode (BCPE) with the help of cyclic voltammetry (CV) technique. A two-folds of electrochemical peak current enhancement was achieved at Vf/CPE in comparison with BCPE towards the determination of 4-aminophenol in optimum pH 7.0 of phosphate buffer solution (PBS). This was achieved due to the large surface area and conductive nature of Vf/CPE, which was concluded through the techniques of cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The effect of pH of buffer and scan rate studies were successfully studied. Morphological changes of BCPE and Vf/CPE was studied with the help of scanning electron microscopy (SEM). The formation of Vf on CPE was also analyzed by Fourier transform infrared (FTIR) spectra. Under the optimized conditions, the limit of detection (LOD) and limit of quantification (LOQ) values of 4-aminophenol were estimated with the aid of chronoamperometry (CA) technique and was found to be 9.8 μM and 32 μM, respectively. Finally the proposed method was found to have satisfactory repeatability, reproducibility and stability results with low relative standard deviation (RSD) values.

Sign in / Sign up

Export Citation Format

Share Document