scholarly journals An Electrochemical Sensor Based On Graphite Electrode Modified With Silica Containing 1-N-Propyl-3-Methylimidazolium Species For Determination Of Ascorbic Acid

2019 ◽  
Vol Vol. 14, No.1 ◽  
pp. 5-14 ◽  
Author(s):  
Anastasiya Tkachenko ◽  
Mykyta Onizhuk ◽  
Oleg Tkachenko ◽  
Leliz T. Arenas ◽  
Edilson V. Benvenutt ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Cyclic Voltammetry ◽  
Electrochemical Sensor ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Differential Pulse ◽  
Long Term Stability ◽  
Diffusion Limited

In the present study, an electrochemical sensor based on the electrode (SiMImCl/C) consisting of graphite and silica, grafted with 1-n-propyl-3-methylimidazolium chloride was used for ascorbic acid (AA) quantification in pharmaceuticals and food formulations. Cyclic voltammetry and electrochemical impedance spectroscopy were applied for electrochemical characterization of the SiMImCl/C electrode. The cyclic voltammetry study revealed that the oxidation of AA on this electrode is an irreversible process, realized by adsorption and diffusion limited step. The differential pulse voltammetry was applied to develop a procedure for the AA determination. The linear range was found to be 0.3–170 μmol L-1 and the limit of detection – 0.1 μmol L-1. The proposed SiMImCl/C electrode has long term stability and does not show electrochemical activity towards the analytes, which commonly coexist with AA. The sensor was successfully used for quantification of AA in food and pharmaceutical formulations.

scholarly journals A new electrochemical sensor based on carbon paste electrode/Ru(III) complex for determination of nitrite: Electrochemical impedance and cyclic voltammetry measurements

Measurement ◽  
2016 ◽  
Vol 92 ◽  
pp. 524-533 ◽  
Author(s):  
Achour Terbouche ◽  
Siham Lameche ◽  
Chafia Ait-Ramdane-Terbouche ◽  
Djamila Guerniche ◽  
Djahida Lerari ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Electrochemical Sensor ◽  
Carbon Paste Electrode ◽  
Electrochemical Impedance ◽  
Carbon Paste ◽  
Paste Electrode

A Facile In-Situ Development of L-Valine Film onto the Surface of Carbon Paste Electrode Towards the Detection of Environmentally Hazardous 4-Amino Phenol

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
T. Venu Gopal ◽  
Tukiakula Madhusudana Reddy ◽  
P. Shaikshavali ◽  
G. Venkataprasad ◽  
P. Gopal
Keyword(s):  
Cyclic Voltammetry ◽  
Carbon Paste Electrode ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Small Scale ◽  
Carbon Paste ◽  
Relative Standard ◽  
Paste Electrode

Abstract A small scale of environmentally hazardous 4-aminophenol can show significant impact on human health. Hence, in the present work, we have designed L-Valine film (Vf) modified carbon paste electrode (Vf/CPE) for the determination of 4-aminophenol. Herein, a facile in-situ L-Valine film was developed by electrochemical polymerization method onto the surface of bare carbon paste electrode (BCPE) with the help of cyclic voltammetry (CV) technique. A two-folds of electrochemical peak current enhancement was achieved at Vf/CPE in comparison with BCPE towards the determination of 4-aminophenol in optimum pH 7.0 of phosphate buffer solution (PBS). This was achieved due to the large surface area and conductive nature of Vf/CPE, which was concluded through the techniques of cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The effect of pH of buffer and scan rate studies were successfully studied. Morphological changes of BCPE and Vf/CPE was studied with the help of scanning electron microscopy (SEM). The formation of Vf on CPE was also analyzed by Fourier transform infrared (FTIR) spectra. Under the optimized conditions, the limit of detection (LOD) and limit of quantification (LOQ) values of 4-aminophenol were estimated with the aid of chronoamperometry (CA) technique and was found to be 9.8 μM and 32 μM, respectively. Finally the proposed method was found to have satisfactory repeatability, reproducibility and stability results with low relative standard deviation (RSD) values.

scholarly journals Novel Electrochemical Sensor Fabricated for Individual and Simultaneous Ultrasensitive Determination of Olaquindox and Carbadox Based on MWCNT-OH/CMK-8 Hybrid Nanocomposite Film

Molecules ◽  
2019 ◽  
Vol 24 (17) ◽  
pp. 3041 ◽  
Author(s):  
Yanqing Liu ◽  
Gengxin Hu ◽  
Hongwu Wang ◽  
Su Yao ◽  
Yinjian Ye
Keyword(s):  
Electrochemical Sensor ◽  
Simultaneous Determination ◽  
Modified Electrode ◽  
Electrochemical Impedance ◽  
Modified Electrodes ◽  
Differential Pulse ◽  
Hybrid Nanocomposite ◽  
Experimental Conditions ◽  
Linear Relationships

A hybrid nanocomposite consisting of hydroxylated multi-walled carbon nanotubes (MWCNTs−OH) and cube mesoporous carbon (CMK−8) was applied in this study to construct an MWCNT−OH/CMK−8/gold electrode (GE) electrochemical sensor and simultaneously perform the electro-reduction of olaquindox (OLA) and carbadox (CBX). The respective peak currents of CBX and OLA on the modified electrode increased by 720- and 595-fold relative to the peak current of GE. The performances of the modified electrode were investigated with electrochemical impedance spectroscopy, cyclic voltammetry, and differential pulse voltammetry. Then, the modified electrodes were used for the individual and simultaneous determination of OLA and CBX. The fabricated sensor demonstrated a linear response at 0.2–500 nmol/L in optimum experimental conditions, and the detection limits were 104.1 and 62.9 pmol/L for the simultaneous determination of OLA and CBX, respectively. As for individual determination, wide linear relationships were obtained for the detected OLA with levels of 0.05–500 nmol/L with LOD of 20.7 pmol/L and the detected CBX with levels of 0.10–500 nmol/L with LOD of 50.2 pmol/L. The fabricated sensor was successfully used in the independent and simultaneous determination of OLA and CBX in spiked pork samples.

Sensitive Determination of Epinephrine in the Presence of Ascorbic Acid at Poly(diphenylamine sulfonic acid) Modified Sensor

2020 ◽  
Vol 18 (4) ◽  
pp. 253-258
Author(s):  
Gamze Erdoğdu
Keyword(s):  
Ascorbic Acid ◽  
Sulfonic Acid ◽  
Limit Of Detection ◽  
Phosphate Buffer Solution ◽  
Differential Pulse ◽  
Buffer Solution ◽  
Sensitive Determination ◽  
Pulse Voltammetry ◽  
Modified Sensor

A sensitive and simple modified sensor was prepared by electrodeposition of diphenylamine sulfonic acid (DPSA) to the glassy carbon electrode surface by cyclic voltammetry (CV) technique. The electrooxidation of epinephrine (EP) was accomplished by CV and differential pulse voltammetry at poly(DPSA) modified sensor. As a result of the findings, the current values were enhanced and both substances were separated at the modified sensor compared to the bare electrode. There was linearly between the oxidation current and concentration of EP from 0.2 to 100 μM in phosphate buffer solution at pH 7.0. The limit of detection was 5.0 nM and the sensitivity was 0.4205 μA/μM. The determination of EP was successfully and satisfactorily carried out in real samples such as human blood serum and urine at the poly(DPSA) sensor. To the best knowledge of this work, this is the first study that detect the EP in the presence of ascorbic acid at poly(DPSA) sensor in the literature.

scholarly journals Voltammetric Determination of Ascorbic Acid in Pharmaceutical Formulations Using Modified Iodine-Coated Platinum Electrode

Revista Vitae ◽  
2021 ◽  
Vol 28 (2) ◽  
Author(s):  
Mohammad Amayreh ◽  
Wafa Hourani ◽  
Mohammed Khair Hourani
Keyword(s):  
Ascorbic Acid ◽  
Platinum Electrode ◽  
Limit Of Detection ◽  
Statistical Tests ◽  
Supporting Electrolyte ◽  
Pharmaceutical Formulations ◽  
Cyclic Voltammograms ◽  
Limit Of Quantitation ◽  
Significant Difference

Background: Despite the high reactivity of the platinum electrode, the iodine-coated platinum electrode shows obvious inertness toward adsorption and surface processes. For that, iodine-coated platinum electrodes accommodate themselves to interesting voltammetric applications. Objectives: This study reports using the modified iodine-coated polycrystalline platinum electrode as a voltammetric sensor for ascorbic acid determination in pharmaceutical formulations. Methods: The developed voltammetric method based on recording cyclic voltammograms of ascorbic acid at iodine-coated electrode The optimized experimental parameters for the determination of ascorbic acid were using 0.1 M KCl as a supporting electrolyte with a scan rate of 50mV/s. Results: The anodic peak related to ascorbic acid oxidation was centered at nearly 0.28V. An excellent and extended linear dependence of the oxidative peak current on the concentration of ascorbic acid was observed in the range 2.84x10-3 - 5.68 mM. The limit of detection (LOD) and limit of quantitation (LOQ) were 1.0 µM and 3.01 µM, respectively, attesting to the method’s sensitivity. The investigation for the effect of potential interference from multivitamin tablet ingredients (vitamins B1, B6, B12, folic acid, citric acid, sucrose, glucose, and zinc) indicated specific selectivity toward ascorbic acid and the absence of any electrochemical response toward these components. Recovery results in the range 98.93±2.78 - 99.98±5.20 for spiked standard ascorbic acid in pharmaceutical formulations further confirmed the potential applicability of the developed method for the determination of ascorbic acid in real samples. Conclusions: The developed method was successfully applied to the analysis of ascorbic acid (vitamin C), and the obtained results were in good agreement with the labeled values; besides, the statistical tests indicated no significant difference at p=0.05 with a 95% confidence level.

Indirect Differential Pulse Voltammetric Determination of Fluoride Ions at Carbon Paste Electrode Modified with Porous and Electroactive Fe3+/Fe2+ Based-Metal Organic Frameworks Type MIL-101(Fe)

2021 ◽  
Author(s):  
Ashraf Mahmoud ◽  
Mater Mahnashi ◽  
Samer Abu-Alrub ◽  
Saad Kahatani ◽  
Mohamed El-Wekil
Keyword(s):  
Carbon Paste Electrode ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Metal Organic Frameworks ◽  
Differential Pulse ◽  
Carbon Paste ◽  
X Ray ◽  
Metal Organic ◽  
Paste Electrode

Abstract An innovative and reliable electrochemical sensor was proposed for simple, sensitive and selective determination of F- ions. The sensor is based on the fabrication of porous and electroactive Fe-based metal organic frameworks [MIL-101(Fe)]. It was blended with graphite powder and liquid paraffin oil to from carbon paste electrode (CPE). The MIL-101(Fe)@CPE was characterized using different techniques such as scanning electron microscope, powder X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray, cyclic voltammetry, electrochemical impedance spectroscopy, differential pulse voltammetry. The MIL-101(Fe)@CPE exhibited two redox peaks (anodic and cathodic) corresponding to Fe3+ and Fe2+, respectively. The determination of F- ions based on the formation of a stable fluoroferric complex with Fe3+/ Fe2+, decreasing the currents of redox species. It was found that the anodic peak current (Ipa) is linearly proportional to the concentration of F- in the range of 0.67-130 µM with a limit of detection (S/N=3) of 0.201 µM. The electrode exhibited good selectivity towards F- detection with no significant interferences from common anions. The as-fabricated sensor was applied for the determination of F- in environmental water samples with recoveries % and RSDs % in the range of 98.1-102.4 % and 2.4-3.7 %, respectively.

scholarly journals A Simple and Cost-Effective TLC-Densitometric Method for the Quantitative Determination of Acetylsalicylic Acid and Ascorbic Acid in Combined Effervescent Tablets

Molecules ◽  
2018 ◽  
Vol 23 (12) ◽  
pp. 3115 ◽  
Author(s):  
Alina Pyka-Pająk ◽  
Małgorzata Dołowy ◽  
Wioletta Parys ◽  
Katarzyna Bober ◽  
Grażyna Janikowska
Keyword(s):  
Ascorbic Acid ◽  
Quantitative Determination ◽  
Acetylsalicylic Acid ◽  
High Performance ◽  
Limit Of Detection ◽  
Volume Ratio ◽  
Cost Effective ◽  
Pharmaceutical Formulations ◽  
Limit Of Quantification

A new, simple, and cost-effective TLC-densitometric method has been established for the simultaneous quantitative determination of acetylsalicylic acid and ascorbic acid in combined effervescent tablets. Separation was performed on aluminum silica gel 60F254 plates using chloroform-ethanol-glacial acid at a volume ratio of 5:4:0.03 as the mobile phase. UV densitometry was performed in absorbance mode at 200 nm and 268 nm for acetylsalicylic acid and ascorbic acid, respectively. The presented method was validated as per ICH guidelines by specificity, linearity, accuracy, precision, limit of detection, limit of quantification, and robustness. Method validations indicate a good sensitivity with a low value of LOD and LOQ of both examined active substances. The linearity range was found to be 1.50–9.00 μg/spot and 1.50–13.50 μg/spot for acetylsalicylic and ascorbic acid, respectively. A coefficient of variation that was less than 3% confirms the satisfactory accuracy and precision of the proposed method. The results of the assay of combined tablet formulation equal 97.1% and 101.6% in relation to the label claim that acetylsalicylic acid and ascorbic acid fulfill pharmacopoeial requirements. The developed TLC-densitometric method can be suitable for the routine simultaneous analysis of acetylsalicylic acid and ascorbic acid in combined pharmaceutical formulations. The proposed TLC-densitometry may be an alternative method to the modern high-performance liquid chromatography in the quality control of above-mentioned substances, and it can be applied when HPLC or GC is not affordable in the laboratory.

scholarly journals MODIFICATION OF CARBON PASTE ELECTRODE WITH CROWN ETHER (DIBENZO-18-CROWN-6) FOR ASCORBIC ACID ANALYSIS USING DIFFERENTIAL PULSE VOLTAMMETRY METHOD

2016 ◽  
Vol 11 (2) ◽  
pp. 175
Author(s):  
Irdhawati Irdhawati ◽  
Manuntun Manurung ◽  
Anisha Maulinasari
Keyword(s):  
Ascorbic Acid ◽  
Crown Ether ◽  
Carbon Paste Electrode ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Modified Carbon Paste Electrode ◽  
Range Limit ◽  
Carbon Paste ◽  
Paste Electrode

In this research, the modified carbon paste electrode with crown ether (dibenzo-18-crown-6) has been prepared, for determination of ascorbic acid. Some of parameters observed were optimization of crown ether composition in carbon paste, pH of solution, linear concentration range, limit of detection, reproducibility, and recovery. The optimum performance of the prepared electrode was applied for determination of commercialsampleswhich contain of ascorbic acid. The result of this research showsthat the optimum composition of crown ether in carbon paste is 0.6 % at pH 4. Linear range of concentration obtained is from 2 - 200 μM. The detection limit and percentage of recovery are 1.243 μM and 101.31 %, respectively. The modified electrode has HorRat value less than 2, it indicates a good reproducibility. Analysis of 4 commercial samples which contain of ascorbic acid were in agreement with the content listed in the label with the suitability of 94 - 100 %.

scholarly journals MODIFICATION OF CARBON PASTE ELECTRODE WITH CROWN ETHER (DIBENZO-18-CROWN-6) FOR ASCORBIC ACID ANALYSIS USING DIFFERENTIAL PULSE VOLTAMMETRY METHOD

2016 ◽  
Vol 11 (2) ◽  
pp. 175
Author(s):  
Irdhawati Irdhawati ◽  
Manuntun Manurung ◽  
Anisha Maulinasari
Keyword(s):  
Ascorbic Acid ◽  
Crown Ether ◽  
Carbon Paste Electrode ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Modified Carbon Paste Electrode ◽  
Range Limit ◽  
Carbon Paste ◽  
Paste Electrode

In this research, the modified carbon paste electrode with crown ether (dibenzo-18-crown-6) has been prepared, for determination of ascorbic acid. Some of parameters observed were optimization of crown ether composition in carbon paste, pH of solution, linear concentration range, limit of detection, reproducibility, and recovery. The optimum performance of the prepared electrode was applied for determination of commercialsampleswhich contain of ascorbic acid. The result of this research showsthat the optimum composition of crown ether in carbon paste is 0.6 % at pH 4. Linear range of concentration obtained is from 2 - 200 μM. The detection limit and percentage of recovery are 1.243 μM and 101.31 %, respectively. The modified electrode has HorRat value less than 2, it indicates a good reproducibility. Analysis of 4 commercial samples which contain of ascorbic acid were in agreement with the content listed in the label with the suitability of 94 - 100 %.

Sign in / Sign up

Export Citation Format

Share Document