scholarly journals Optimal Design of a Secondary Optical Element for a Noncoplanar Two-Reflector Solar Concentrator

2015 ◽  
Vol 2015 ◽  
pp. 1-8
Author(s):  
Yi-Cheng Chen ◽  
Chia-Chi You
Keyword(s):  
Design Process ◽  
Parametric Design ◽  
Optical Element ◽  
Solar Concentrator ◽  
Optical Performance ◽  
Parabolic Mirror ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Two Phases ◽  
Ray Tracing Simulation

This paper presents the results of a parametric design process used to achieve an optimal secondary optical element (SOE) in a noncoplanar solar concentrator composed of two reflectors. The noncoplanar solar concentrator comprises a primary parabolic mirror (M1) and a secondary hyperbolic mirror (M2). The optical performance (i.e., acceptance angle, optical efficiency, and irradiance distribution) of concentrators with various SOEs was compared using ray-tracing simulation. The parametric design process for the SOE was divided into two phases, and an optimal SOE was obtained. The sensitivity to assembly errors of the solar concentrator when using the optimal SOE was studied and the findings are discussed.

Design of Secondary Optical Element for a Two-Reflector Solar Concentrator

2013 ◽  
Vol 479-480 ◽  
pp. 161-165 ◽  
Author(s):  
Yi Cheng Chen ◽  
Chia Chi You
Keyword(s):  
Ray Tracing ◽  
Optimum Design ◽  
Optical Element ◽  
Solar Concentrator ◽  
Optical Performance ◽  
Parabolic Mirror ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Ray Tracing Simulation

This study explores the optimum design of secondary optical element (SOE) for a non-coplanar two-reflector solar concentrator. The non-coplanar solar concentrator comprises a primary parabolic mirror and a secondary hyperbolic mirror. Ray tracing simulation is adopted to investigate the optical performance, including the acceptance angle and the optical efficiency, of the solar concentrator with various designs of SOE. Finally, preliminary optimum designs of SOE are presented and discussed.

scholarly journals Design and Fabrication of Absorptive/Reflective Crossed CPC PV/T System

Designs ◽  
2018 ◽  
Vol 2 (3) ◽  
pp. 29
Author(s):  
Muhsin Aykapadathu ◽  
Mehdi Nazarinia ◽  
Nazmi Sellami
Keyword(s):  
Numerical Control ◽  
Solar Concentrator ◽  
Cnc Milling ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Compound Parabolic Concentrator ◽  
Building Integrated Photovoltaic ◽  
New Generation ◽  
Experimental Rig ◽  
T System

A crossed compound parabolic concentrator (CCPC) is a non-imaging concentrator which is a modified form of a circular 3D compound parabolic concentrator (CPC) obtained by orthogonal intersection of two 2D CPCs that have an optical efficiency in line with that of 3D CPC. The present work is about the design and fabrication of a new generation of solar concentrator: the hybrid photovoltaic (PV)/thermal absorptive/reflective CCPC module. The module has a 4× CCPC structure truncated to have a concentration of 3.6× with a half acceptance angle of 30°. Furthermore, an experimental rig was also fabricated to test the performance of the module and its feasibility in real applications such as building-integrated photovoltaic (BIPV). 3D printing and Computer Numerical Control (CNC) milling technologies were utilized to manufacture the absorber and reflective parts of the module.

Optical Analysis of a Heliostat Array With Linked Tracking

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
M. T. Dunham ◽  
R. Kasetty ◽  
A. Mathur ◽  
W. Lipiński
Keyword(s):  
Concentration Ratio ◽  
Tracking System ◽  
Average Concentration ◽  
Solar Concentrator ◽  
Optical Performance ◽  
Optical Analysis ◽  
Optical Efficiency ◽  
The North ◽  
The Individual ◽  
East West

The optical performance of a novel solar concentrator consisting of a 400 spherical heliostat array and a linked two-axis tracking system is analyzed using the Monte Carlo ray-tracing technique. The optical efficiency and concentration ratio are compared for four different heliostat linkage configurations, including linkages of 1 × 1, 1 × 2, 2 × 2, 4 × 4, and 5 × 5 heliostats for 7-hour operation and the selected months of June and December. The optical performance of the concentrator decreases with the increasing number of heliostats in the individual groups due to increasing optical inaccuracies. In June, the best-performing linked configuration, in which 1 heliostat in the east-west direction and 2 heliostats in the north-south direction are linked, provides a monthly-averaged 7-hour optical efficiency and average concentration ratio of 79% and 511 suns, respectively. In December, the optical efficiency and the average concentration ratio decreases to 61% and 315 suns, respectively.

Optical Performance Comparison of Six ACPCs for Concentrating Radiation on All-Glass Evacuated Solar Tubes

2015 ◽  
Vol 1092-1093 ◽  
pp. 52-58 ◽  
Author(s):  
Rui Hua Xu ◽  
Qi Chao Zhang ◽  
Run Sheng Tang
Keyword(s):  
Ray Tracing ◽  
Concentration Factor ◽  
Performance Comparison ◽  
Optical Performance ◽  
Acceptance Angle ◽  
Direct Sunlight ◽  
Optical Efficiency ◽  
The One ◽  
East West ◽  
Tracing Method

In this work, six asymmetric compound parabolic concentrators (ACPC) were designed for concentrating radiation on all-glass evacuated solar tubes (EST). The ACPCs are required to be horizontally oriented in the east-west direction and to collect direct sunlight for at least 6 hrs in any day of a year. The angular dependence of optical efficiency of six ACPCs, identical in the height of both reflectors after the higher reflector being truncated, was investigated by ray-tracing method, and the annual radiation on EST concentrated by ACPCs was estimated based on solar geometry and monthly horizontally radiation. Results shows that the ACPC designed based on “hat shaped” virtual absorber with a V-groove at the bottom of reflectors is the best in terms of the optical efficiency averaged over the acceptance angle, followed by the one designed based on “hat-shaped” absorber without a V-groove at the bottom, and the one designed based on the cover tube of EST is the worst. However, from the point of annual radiation on EST, the ACPC designed based on the cover tube is the best solution, followed by the one designed based on “ice-cream shaped” absorber and the one designed based on “hat shaped” absorber is the worst due to the smallest geometric concentration factor.

scholarly journals Design and Evaluation of Polygonal Trough Solar Concentrator

2021 ◽  
Vol 34 (4) ◽  
pp. 10-16
Author(s):  
Yasser Yassin Khudair ◽  
Alaa Badr Hasan
Keyword(s):  
Concentration Ratio ◽  
Angle Of Incidence ◽  
Solar Concentrator ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Cylindrical Mirror ◽  
Design For All ◽  
Reflecting Surfaces ◽  
Reflecting Surface ◽  
To Receive

     In this paper, a solar concentrator is designed in the form of a concave half-cylindrical mirror consisting of polygonal reflective surface plates. The plates are arranged to give a hemispherical shape to the design. These surfaces work to receive solar radiation and focusing by reflecting it to the receiver that is placed in front of the reflecting surfaces. The results are compared with a system consisting of a concave reflecting surface of the same dimensions to obtain a good criterion for evaluating the design performance. The results showed a low acceptance angle for the design for all the samples used due to the geometrical design nature. The optical efficiency affected by the angle of incidence greatly by all the samples used, which differ in the concentration ratio, width and location of the receiver.

scholarly journals High Concentration Photovoltaics (HCPV) with Diffractive Secondary Optical Elements

Photonics ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 68 ◽  
Author(s):  
Furkan Sahin ◽  
Musa Yılmaz
Keyword(s):  
Low Cost ◽  
Optical Design ◽  
Chromatic Aberration ◽  
High Energy ◽  
Solar Concentrator ◽  
High Concentration ◽  
Acceptance Angle ◽  
Optical Elements ◽  
Optical Efficiency ◽  
Single Material

Multi-junction solar cells can be economically viable for terrestrial applications when operated under concentrated illuminations. The optimal design of concentrator optics in high concentration photovoltaics (HCPV) systems is crucial for achieving high energy conversion. At a high geometric concentration, chromatic aberration of the primary lens can restrict the optical efficiency and acceptance angle. In order to correct chromatic aberration, multi-material, multi-element refractive elements, hybrid refractive/diffractive elements, or multi-element refractive and diffractive systems can be designed. In this paper, the effect of introducing a diffractive surface in the optical path is analyzed. An example two-stage refractive and diffractive optical system is shown to have an optical efficiency of up to 0.87, and an acceptance angle of up to ±0.55° with a 1600× geometric concentration ratio, which is a significant improvement compared to a single-stage concentrator system with a single material. This optical design can be mass-produced with conventional fabrication methods, thus providing a low-cost alternative to other approaches, and the design approach can be generalized to many other solar concentrator systems with different cell sizes and geometric concentration ratios.

scholarly journals Optical Simulation and Experimental Verification of a Fresnel Solar Concentrator with a New Hybrid Second Optical Element

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Guiqiang Li ◽  
Yi Jin
Keyword(s):  
Optical Properties ◽  
Concentration Ratio ◽  
Flux Distribution ◽  
Deflection Angle ◽  
Optical Element ◽  
Fresnel Lens ◽  
Optical Simulation ◽  
Solar Concentrator ◽  
Optical Efficiency ◽  
Solar Concentrators

Fresnel solar concentrator is one of the most common solar concentrators in solar applications. For high Fresnel concentrating PV or PV/T systems, the second optical element (SOE) is the key component for the high optical efficiency at a wider deflection angle, which is important for overcoming unavoidable errors from the tacking system, the Fresnel lens processing and installment technology, and so forth. In this paper, a new hybrid SOE was designed to match the Fresnel solar concentrator with the concentration ratio of 1090x. The ray-tracing technology was employed to indicate the optical properties. The simulation outcome showed that the Fresnel solar concentrator with the new hybrid SOE has a wider deflection angle scope with the high optical efficiency. Furthermore, the flux distribution with different deviation angles was also analyzed. In addition, the experiment of the Fresnel solar concentrator with the hybrid SOE under outdoor condition was carried out. The verifications from the electrical and thermal outputs were all made to analyze the optical efficiency comprehensively. The optical efficiency resulting from the experiment is found to be consistent with that from the simulation.

scholarly journals Enhancing the Optical Efficiency of Near-Eye Displays with Liquid Crystal Optics

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 107
Author(s):  
Tao Zhan ◽  
En-Lin Hsiang ◽  
Kun Li ◽  
Shin-Tson Wu
Keyword(s):  
Virtual Reality ◽  
Liquid Crystal ◽  
High Efficiency ◽  
Berry Phase ◽  
Optical Element ◽  
Liquid Crystal Polymer ◽  
Proof Of Concept ◽  
Optical Efficiency ◽  
Crystal Polymer ◽  
Light Efficiency

We demonstrate a light efficient virtual reality (VR) near-eye display (NED) design based on a directional display panel and a diffractive deflection film (DDF). The DDF was essentially a high-efficiency Pancharatnam-Berry phase optical element made of liquid crystal polymer. The essence of this design is directing most of the display light into the eyebox. The proposed method is applicable for both catadioptric and dioptric VR lenses. A proof-of-concept experiment was conducted with off-the-shelf optical parts, where the light efficiency was enhanced by more than 2 times.

scholarly journals Design space exploration for flexibility assessment and decision making support in integrated industrial building design

2021 ◽  
Author(s):  
Julia Reisinger ◽  
Maximilian Knoll ◽  
Iva Kovacic
Keyword(s):  
Decision Making ◽  
Design Process ◽  
Design Space Exploration ◽  
Design Space ◽  
Parametric Design ◽  
Space Exploration ◽  
Building Design ◽  
Assessment Tools ◽  
Industrial Building ◽  
Industrial Buildings

AbstractIndustrial buildings play a major role in sustainable development, producing and expending a significant amount of resources, energy and waste. Due to product individualization and accelerating technological advances in manufacturing, industrial buildings strive for highly flexible building structures to accommodate constantly evolving production processes. However, common sustainability assessment tools do not respect flexibility metrics and manufacturing and building design processes run sequentially, neglecting discipline-specific interaction, leading to inflexible solutions. In integrated industrial building design (IIBD), incorporating manufacturing and building disciplines simultaneously, design teams are faced with the choice of multiple conflicting criteria and complex design decisions, opening up a huge design space. To address these issues, this paper presents a parametric design process for efficient design space exploration in IIBD. A state-of-the-art survey and multiple case study are conducted to define four novel flexibility metrics and to develop a unified design space, respecting both building and manufacturing requirements. Based on these results, a parametric design process for automated structural optimization and quantitative flexibility assessment is developed, guiding the decision-making process towards increased sustainability. The proposed framework is tested on a pilot-project of a food and hygiene production, evaluating the design space representation and validating the flexibility metrics. Results confirmed the efficiency of the process that an evolutionary multi-objective optimization algorithm can be implemented in future research to enable multidisciplinary design optimization for flexible industrial building solutions.

scholarly journals Optical Performance of Single Point-Focus Fresnel Lens Concentrator System for Multiple Multi-Junction Solar Cells—A Numerical Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4301
Author(s):  
Yassir A. Alamri ◽  
Saad Mahmoud ◽  
Raya Al-Dadah ◽  
Shivangi Sharma ◽  
J. N. Roy ◽  
...  
Keyword(s):  
Solar Cells ◽  
Numerical Study ◽  
Single Point ◽  
Optical Element ◽  
Fresnel Lens ◽  
Electrical Performance ◽  
High Concentration ◽  
Three Dimensional Model ◽  
Optical Efficiency ◽  
Concave Lens

This paper investigates the potential of a new integrated solar concentrated photovoltaic (CPV) system that uses a solo point focus Fresnel lens for multiple multi-junction solar cells (MJSCs). The proposed system comprises of an FL concentrator as the primary optical element, a multi-leg homogeniser as the secondary optical element (SOE), a plano-concave lens, and four MJSCs. A three-dimensional model of this system was developed using the ray tracing method to predict the influence of aperture width, height, and position with respect to MJSCs of different reflective and refractive SOE on the overall optical efficiency of the system and the irradiance uniformity achieved on the MJSCs’ surfaces. The results show that the refractive homogeniser using N-BK7 glass can achieve higher optical efficiency (79%) compared to the reflective homogeniser (57.5%). In addition, the peak to average ratio of illumination at MJSCs for the reflective homogeniser ranges from 1.07 to 1.14, while for the refractive homogeniser, it ranges from 1.06 to 1.34, causing minimum effects on the electrical performance of the MJSCs. The novelty of this paper is the development of a high concentration CPV system that integrates multiple MJSCs with a uniform distribution of rays, unlike the conventional CPV systems that utilise a single concentrator onto a single MJSC. The optical efficiency of the CPV system was also examined using both the types of homogeniser (reflective and refractive).

Sign in / Sign up

Export Citation Format

Share Document