scholarly journals High Concentration Photovoltaics (HCPV) with Diffractive Secondary Optical Elements

Photonics ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 68 ◽  
Author(s):  
Furkan Sahin ◽  
Musa Yılmaz
Keyword(s):  
Low Cost ◽  
Optical Design ◽  
Chromatic Aberration ◽  
High Energy ◽  
Solar Concentrator ◽  
High Concentration ◽  
Acceptance Angle ◽  
Optical Elements ◽  
Optical Efficiency ◽  
Single Material

Multi-junction solar cells can be economically viable for terrestrial applications when operated under concentrated illuminations. The optimal design of concentrator optics in high concentration photovoltaics (HCPV) systems is crucial for achieving high energy conversion. At a high geometric concentration, chromatic aberration of the primary lens can restrict the optical efficiency and acceptance angle. In order to correct chromatic aberration, multi-material, multi-element refractive elements, hybrid refractive/diffractive elements, or multi-element refractive and diffractive systems can be designed. In this paper, the effect of introducing a diffractive surface in the optical path is analyzed. An example two-stage refractive and diffractive optical system is shown to have an optical efficiency of up to 0.87, and an acceptance angle of up to ±0.55° with a 1600× geometric concentration ratio, which is a significant improvement compared to a single-stage concentrator system with a single material. This optical design can be mass-produced with conventional fabrication methods, thus providing a low-cost alternative to other approaches, and the design approach can be generalized to many other solar concentrator systems with different cell sizes and geometric concentration ratios.

scholarly journals Design and Fabrication of Absorptive/Reflective Crossed CPC PV/T System

Designs ◽  
2018 ◽  
Vol 2 (3) ◽  
pp. 29
Author(s):  
Muhsin Aykapadathu ◽  
Mehdi Nazarinia ◽  
Nazmi Sellami
Keyword(s):  
Numerical Control ◽  
Solar Concentrator ◽  
Cnc Milling ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Compound Parabolic Concentrator ◽  
Building Integrated Photovoltaic ◽  
New Generation ◽  
Experimental Rig ◽  
T System

A crossed compound parabolic concentrator (CCPC) is a non-imaging concentrator which is a modified form of a circular 3D compound parabolic concentrator (CPC) obtained by orthogonal intersection of two 2D CPCs that have an optical efficiency in line with that of 3D CPC. The present work is about the design and fabrication of a new generation of solar concentrator: the hybrid photovoltaic (PV)/thermal absorptive/reflective CCPC module. The module has a 4× CCPC structure truncated to have a concentration of 3.6× with a half acceptance angle of 30°. Furthermore, an experimental rig was also fabricated to test the performance of the module and its feasibility in real applications such as building-integrated photovoltaic (BIPV). 3D printing and Computer Numerical Control (CNC) milling technologies were utilized to manufacture the absorber and reflective parts of the module.

scholarly journals Ray Tracing Study of Optical Characteristics of the Solar Image in the Receiver for a Thermal Solar Parabolic Dish Collector

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Saša R. Pavlovic ◽  
Velimir P. Stefanovic
Keyword(s):  
Ray Tracing ◽  
Low Cost ◽  
Optical Design ◽  
Solar Concentrator ◽  
Solar Collectors ◽  
Focal Distance ◽  
Medium Temperature ◽  
Parabolic Dish ◽  
Parabolic Dish Concentrator ◽  
Temperature Levels

This study presents the geometric aspects of the focal image for a solar parabolic concentrator (SPC) using the ray tracing technique to establish parameters that allow the designation of the most suitable geometry for coupling the SPC to absorber-receiver. The efficient conversion of solar radiation into heat at these temperature levels requires a use of concentrating solar collectors. In this paper detailed optical design of the solar parabolic dish concentrator is presented. The system has diameter D=3800 mm and focal distance f=2260 mm. The parabolic dish of the solar system consists of 11 curvilinear trapezoidal reflective petals. For the construction of the solar collectors, mild steel-sheet and square pipe were used as the shell support for the reflecting surfaces. This paper presents optical simulations of the parabolic solar concentrator unit using the ray tracing software TracePro. The total flux on the receiver and the distribution of irradiance for absorbing flux on center and periphery receiver are given. The goal of this paper is to present the optical design of a low-tech solar concentrator that can be used as a potentially low cost tool for laboratory scale research on the medium-temperature thermal processes, cooling, industrial processes, polygeneration systems, and so forth.

Design of Diffractive Optical Elements for Chromatic Aberration Correction in High-Energy Petawatt Laser System

2010 ◽  
Vol 30 (1) ◽  
pp. 142-146
Author(s):  
谢旭东 Xie Xudong ◽  
朱启华 Zhu Qihua ◽  
周凯南 Zhou Kainan ◽  
张颖 Zhang Ying ◽  
黄小军 Huang Xiaojun
Keyword(s):  
Laser System ◽  
Chromatic Aberration ◽  
High Energy ◽  
Aberration Correction ◽  
Diffractive Optical Elements ◽  
Optical Elements

scholarly journals Study on the Optical Properties of Triangular Cavity Absorber for Parabolic Trough Solar Concentrator

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Fei Chen ◽  
Ming Li ◽  
Reda Hassanien Emam Hassanien ◽  
Xi Luo ◽  
Yongrui Hong ◽  
...  
Keyword(s):  
Optical Properties ◽  
Orthogonal Experiment ◽  
Optical Design ◽  
Width Ratio ◽  
Solar Concentrator ◽  
Parabolic Trough ◽  
Optical Efficiency ◽  
Offset Distance ◽  
Aperture Width ◽  
Design Software

A theoretical analytical method for optical properties of cavity absorber was proposed in this paper and the optical design software TracePro was used to analyze the optical properties of triangular cavity absorber. It was found that the optimal optical properties could be achieved with appropriate aperture width, depth-to-width ratio, and offset distance from focus of triangular cavity absorber. Based on the results of orthogonal experiment, the optimized triangular cavity absorber was designed. Results showed that the standard deviation of irradiance and optical efficiency of optimized designed cavity absorber were 30528 W/m2and 89.23%, respectively. Therefore, this study could offer some valuable references for designing the parabolic trough solar concentrator in the future.

scholarly journals Optimal Design of a Secondary Optical Element for a Noncoplanar Two-Reflector Solar Concentrator

2015 ◽  
Vol 2015 ◽  
pp. 1-8
Author(s):  
Yi-Cheng Chen ◽  
Chia-Chi You
Keyword(s):  
Design Process ◽  
Parametric Design ◽  
Optical Element ◽  
Solar Concentrator ◽  
Optical Performance ◽  
Parabolic Mirror ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Two Phases ◽  
Ray Tracing Simulation

This paper presents the results of a parametric design process used to achieve an optimal secondary optical element (SOE) in a noncoplanar solar concentrator composed of two reflectors. The noncoplanar solar concentrator comprises a primary parabolic mirror (M1) and a secondary hyperbolic mirror (M2). The optical performance (i.e., acceptance angle, optical efficiency, and irradiance distribution) of concentrators with various SOEs was compared using ray-tracing simulation. The parametric design process for the SOE was divided into two phases, and an optimal SOE was obtained. The sensitivity to assembly errors of the solar concentrator when using the optimal SOE was studied and the findings are discussed.

Laser Power Characterization Method for Fabrication of Centrosymmetric CR-DOEs Mask

2008 ◽  
Vol 53-54 ◽  
pp. 337-342
Author(s):  
Duo Shu Wang ◽  
Chong Tai Luo ◽  
Tao Chen ◽  
Yu Qing Xiong ◽  
Hong Kai Liu ◽  
...  
Keyword(s):  
Laser Power ◽  
Low Cost ◽  
Chromatic Aberration ◽  
Diffractive Optical Elements ◽  
Direct Writing ◽  
Laser Direct Writing ◽  
Optical Elements ◽  
Short Period ◽  
Diffractive Efficiency ◽  
Mask Fabrication

With high diffractive efficiency, Continuous Relief Diffractive Optical Elements (CR-DOE) can be used to eliminate chromatic aberration, partial aberration and simplify optical system. The technology for CR-DOE with Laser Direct Writing method has advantages of simple process, short period and low cost. The paper studied on the characterization method of laser power for the technology. The principle of mask fabrication of CR-DOE by Laser Direct Writing is described in the paper. The relations between microstructure depth and laser power, exposing position radius and laser power were studied. The results showed that microstructure depth changes in direct ratio to laser power and laser power should change in direct to exposing position radius while several same depth microstructures were fabricated at different radius. At the end, the paper gave the charactering method and also fabricated the mask of a kind of centrosymmetric continuous relief diffractive focus lens with the method.

scholarly journals Design and Evaluation of Polygonal Trough Solar Concentrator

2021 ◽  
Vol 34 (4) ◽  
pp. 10-16
Author(s):  
Yasser Yassin Khudair ◽  
Alaa Badr Hasan
Keyword(s):  
Concentration Ratio ◽  
Angle Of Incidence ◽  
Solar Concentrator ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Cylindrical Mirror ◽  
Design For All ◽  
Reflecting Surfaces ◽  
Reflecting Surface ◽  
To Receive

     In this paper, a solar concentrator is designed in the form of a concave half-cylindrical mirror consisting of polygonal reflective surface plates. The plates are arranged to give a hemispherical shape to the design. These surfaces work to receive solar radiation and focusing by reflecting it to the receiver that is placed in front of the reflecting surfaces. The results are compared with a system consisting of a concave reflecting surface of the same dimensions to obtain a good criterion for evaluating the design performance. The results showed a low acceptance angle for the design for all the samples used due to the geometrical design nature. The optical efficiency affected by the angle of incidence greatly by all the samples used, which differ in the concentration ratio, width and location of the receiver.

scholarly journals Novel Design of Primary Optical Elements Based on a Linear Fresnel Lens for Concentrator Photovoltaic Technology

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1209 ◽  
Author(s):  
Thanh Pham ◽  
Ngoc Vu ◽  
Seoyong Shin
Keyword(s):  
Concentration Ratio ◽  
Optical Element ◽  
Optical Path Length ◽  
Fresnel Lens ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Optical Simulation ◽  
High Concentration ◽  
Optical Elements ◽  
Optical Efficiency

In this paper, we present a design and optical simulation of a novel linear Fresnel lens. The lens can be applied to a concentrator photovoltaic (CPV) system as a primary optical element (POE) to increase the concentration ratio and improve the uniformity of irradiance distribution over the receiver. In addition, the CPV system can use the proposed lens as a concentrator without involving a secondary optical element (SOE). The designed lens, which is a combination of two linear Fresnel lenses placed perpendicular to each other, can collect and distribute the direct sunlight on two dimensions. The lens is first designed in the MATLAB program, based on the edge ray theorem, Snell’s law, and the conservation of the optical path length, and then drawn in three dimensions (3D) by using LightToolsTM. Furthermore, in order to optimize the structure and investigate the performance of the lens, the ray tracing and the simulation are also performed in LightToolsTM. The results show that the newly designed lens can achieve a high concentration ratio of 576 times, a high optical efficiency of 82.4%, an acceptable tolerance of 0.84°, and high uniform irradiance of around 77% for both horizontal and vertical investigation lines over the receiver.

Proposal for a photoelectron spectroscopy and microscopy beamline (0.5–11 keV) at the High Energy Photon Source

2019 ◽  
Vol 26 (2) ◽  
pp. 559-564
Author(s):  
Kun Tang ◽  
Lei Zheng ◽  
Jia-Ou Wang ◽  
Yi-Dong Zhao
Keyword(s):  
Energy Range ◽  
Photoelectron Spectroscopy ◽  
Optical Design ◽  
High Energy ◽  
High Energy Photon ◽  
Energy Photon ◽  
Optical Efficiency ◽  
X Ray ◽  
Entire Energy Range ◽  
Photon Source

An optical design study of a beamline proposed for the new 6 GeV synchrotron, the High Energy Photon Source (HEPS), to be built in Beijing, China, is described. The beamline is designed to cover an energy range from 0.5 to 11 keV with two experimental stations, one for X-ray photoelectron spectroscopy (PES) experiments and the other for photoelectron emission microscopy (XPEEM) experiments. A 5 m APPLE II-type undulator with a relatively long magnetic period (55 mm) is used as the only radiation source. To optimize the optical efficiency for the full energy range, the beamline is split into a soft X-ray branch that is based on a variable-line-spacing plane-grating monochromator and a tender X-ray branch that uses a four-bounce monochromator with three Si channel-cut pairs. To allow both PES and XPEEM to be performed over the entire energy range, two toroidal mirrors and a bendable KB mirror pair are employed to deliver the soft and tender beams, respectively, to either of two experimental stations.

scholarly journals Miniature planar telescopes for efficient, wide-angle, high-precision beam steering

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Ziqian He ◽  
Kun Yin ◽  
Shin-Tson Wu
Keyword(s):  
Liquid Crystal ◽  
Optical Tweezers ◽  
High Precision ◽  
High Efficiency ◽  
Low Cost ◽  
Beam Steering ◽  
Large Angle ◽  
High Quality ◽  
Optical Elements ◽  
Optical Efficiency

AbstractNon-mechanical beam steerers with lightweight, compact, high-efficiency, high-precision, and/or large-angle are pivotal for light detection and ranging (LiDAR) of autonomous vehicles, eye-tracking for near-eye displays, microscopy, optical tweezers, and high-precision three-dimensional (3D) printing. However, even the most matured optical phased array can only provide quasi-continuous, efficient beam steering within a small angle range. A telescope module with an angle magnification function can be coupled to enlarge the steering range or precision. But obtaining a compact, low-cost, lightweight, high-quality telescope module with conventional optics remains challenging. Patterned liquid crystal-based planar optical elements offer great design freedom for manipulating the phase profile of light in 2D space. Owing to the advantages of high efficiency, thinness, low cost, easy processing, flexibility, and response to environmental stimuli, a plethora of high-quality optical devices have been demonstrated. Here, a miniature planar telescope mediated by liquid crystal polymers is proposed to offer angle magnification independent of incident spatial location. It consists of two cascaded liquid crystal planar optical elements, each performing a predefined mathematical transformation. By this concept, planar optical elements are fabricated using a new exposure method and assembled into planar telescopes with different magnification factors. Within the incident field range, over 84.6% optical efficiency is achieved with small wavefront distortion. Such a miniature planar telescope shows the potential of cascaded liquid crystal planar optical elements for realizing functionalities that cannot be fulfilled by single optical elements, and enables lightweight, low loss, passive optical transmitters for widespread applications.

Sign in / Sign up

Export Citation Format

Share Document