scholarly journals Histological Comparison in Rats between Carbonate Apatite Fabricated from Gypsum and Sintered Hydroxyapatite on Bone Remodeling

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yasunori Ayukawa ◽  
Yumiko Suzuki ◽  
Kanji Tsuru ◽  
Kiyoshi Koyano ◽  
Kunio Ishikawa
Keyword(s):  
Bone Remodeling ◽  
Cellular Response ◽  
Bone Matrix ◽  
Fibrous Tissue ◽  
Bone Defects ◽  
Histological Evaluation ◽  
Precipitation Reaction ◽  
Carbonate Apatite ◽  
Osteoclastic Resorption ◽  
Low Crystalline

Carbonate apatite (CO3Ap), the form of apatite found in bone, has recently attracted attention. The purpose of the present study was to histologically evaluate the tissue/cellular response toward the low-crystalline CO3Ap fabricated using a dissolution-precipitation reaction with set gypsum as a precursor. When set gypsum was immersed in a 100°C 1 mol/L Na3PO4aqueous solution for 24 h, the set gypsum transformed into CO3Ap. Both CO3Ap and sintered hydroxyapatite (s-HAp), which was used as a control, were implanted into surgically created tibial bone defects of rats for histological evaluation. Two and 4 weeks after the implantation, histological sections were created and observed using light microscopy. The CO3Ap granules revealed both direct apposition of the bone matrix by osteoblasts and osteoclastic resorption. In contrast, the s-HAp granules maintained their contour even after 4 weeks following implantation which implied that there was a lack of replacement into the bone. The s-HAp granules were sometimes encapsulated with fibrous tissue, and macrophage polykaryon was occasionally observed directly apposed to the implanted granules. From the viewpoint of bone remodeling, the CO3Ap granules mimicked the bone matrix, suggesting that CO3Ap may be an appropriate bone substitute.

scholarly journals Fabrication and Histological Evaluation of Porous Carbonate Apatite Block from Gypsum Block Containing Spherical Phenol Resin as a Porogen

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3997
Author(s):  
Yuta Sakemi ◽  
Koichiro Hayashi ◽  
Akira Tsuchiya ◽  
Yasuharu Nakashima ◽  
Kunio Ishikawa
Keyword(s):  
Bone Substitute ◽  
Sodium Carbonate Solution ◽  
Bone Defects ◽  
Histological Evaluation ◽  
Precipitation Reaction ◽  
Carbonate Apatite ◽  
Macroporous Structure ◽  
Phenol Resin ◽  
Burn Out ◽  
Good Potential

The utility of carbonate apatite (CO3Ap) as a bone substitute has been demonstrated. The feasibility of fabricating macroporous CO3Ap was evaluated through a two-step dissolution–precipitation reaction using gypsum as the precursor and spherical phenol resin as the porogen. Porogen-containing gypsum was heated to burn out the porogen and to fabricate macroporous structures. Gypsum transformed into CaCO3 upon immersion in a sodium carbonate solution, while maintaining its macroporous structure. Next, CaCO3 transformed into CO3Ap upon immersion in a Na2HPO4 solution while maintaining its macroporous structure. The utility of the macroporous CO3Ap for histologically reconstructing bone defects was evaluated in rabbit femurs. After 4 weeks, a much larger bone was formed inside the macroporous CO3Ap than that inside non-macroporous CO3Ap and macroporous hydroxyapatite (HAp). A larger amount of bone was observed inside non-macroporous CO3Ap than inside macroporous HAp. The bone defects were completely reconstructed within 12 weeks using macroporous CO3Ap. In conclusion, macroporous CO3Ap has good potential as an ideal bone substitute.

scholarly journals Staged Sinus Floor Elevation Using Novel Low-Crystalline Carbonate Apatite Granules: Prospective Results after 3-Year Functional Loading

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5760
Author(s):  
Yoichiro Ogino ◽  
Yasunori Ayukawa ◽  
Noriko Tachikawa ◽  
Masahiro Shimogishi ◽  
Youji Miyamoto ◽  
...  
Keyword(s):  
Histological Evaluation ◽  
Carbonate Apatite ◽  
Success Rates ◽  
Sinus Floor Elevation ◽  
Implant Placement ◽  
Sinus Floor ◽  
Height Increase ◽  
Low Crystalline ◽  
Bone Height ◽  
Functional Loading

The aim of this study was to evaluate clinical outcomes of staged sinus floor elevation (SFE) using novel low-crystalline carbonate apatite (CO3Ap) granules. Patients who needed SFE for implant placement were recruited into this clinical trial. A staged procedure (lateral window technique using CO3Ap granules, followed by implant placement after 7 ± 2 months) was employed in 13 patients. Bone-height increase and insertion torque values (ITVs) were assessed along with histological evaluation. The survival and success rates of 3-year functioning implants were also evaluated. Mean of bone-height increase after SFE using CO3Ap granules was 7.2 ± 2.5 mm and this increase allowed implant placement in all cases (17 implants). Mean of ITV was 25.1 ± 13.2 Ncm and primary stability was achieved successfully in all cases. Histological analyses revealed mature new bone formation (36.8 ± 17.3%) and residual CO3Ap granules (16.2 ± 10.1%) in the compartment after SFE. The survival and success rates after 3-year functional loading were 100% and no complications were found. These results clearly indicate the clinical usefulness of CO3Ap granules for SFE.

scholarly journals Effect of Systemic Zoledronic Acid Dosing Regimens on Bone Regeneration in Osteoporotic Rats

2021 ◽  
Vol 11 (4) ◽  
pp. 1906
Author(s):  
Marwa Y. Shaheen ◽  
Amani M. Basudan ◽  
Abdurahman A. Niazy ◽  
Jeroen J. J. P. van den Beucken ◽  
John A. Jansen ◽  
...  
Keyword(s):  
Bone Graft ◽  
Bone Grafting ◽  
Femoral Condyle ◽  
Bone Defects ◽  
Histological Evaluation ◽  
Favorable Effect ◽  
Osteoporotic Bone ◽  
Bovine Bone ◽  
Graft Placement ◽  
Regeneration Of Bone

The aim of this study was to evaluate the regeneration of bone defects created in the femoral condyle of osteoporotic rats, following intravenous (IV) zoledronate (ZA) treatment in three settings: pre-bone grafting (ZA-Pre), post-bone grafting (ZA-Post), and pre- plus post-bone grafting (ZA-Pre+Post). Twenty-four female Wistar rats were ovariectomized (OVX). After 12 weeks, bone defects were created in the left femoral condyle. All defects were grafted with a particulate inorganic cancellous bovine bone substitute. ZA (0.04 mg/kg, weekly) was administered to six rats 4 weeks pre-bone graft placement. To another six rats, ZA was given post-bone graft placement creation and continued for 6 weeks. Additional six rats received ZA treatment pre- and post-bone graft placement. Control animals received weekly saline intravenous injections. At 6 weeks post-bone graft placement, samples were retrieved for histological evaluation of the bone area percentage (BA%) and remaining bone graft percentage (RBG%). BA% for ZA-Pre (50.1 ± 3.5%) and ZA-Post (49.2 ± 8.2%) rats was significantly increased compared to that of the controls (35.4 ± 5.4%, p-value 0.031 and 0.043, respectively). In contrast, ZA-Pre+Post rats (40.7 ± 16.0%) showed similar BA% compared to saline controls (p = 0.663). For RBG%, all experimental groups showed similar results ranging from 36.3 to 47.1%. Our data indicate that pre- or post-surgical systemic IV administration of ZA improves the regeneration of bone defects grafted with inorganic cancellous bovine-bone particles in osteoporotic bone conditions. However, no favorable effect on bone repair was seen for continued pre- plus post-surgical ZA treatment.

scholarly journals Defect structures of sodium and chloride co-substituted hydroxyapatite and its osseointegration capacity

2021 ◽  
Vol 56 (9) ◽  
pp. 5493-5508
Author(s):  
Dong Su Yoo ◽  
Jung Sang Cho ◽  
Yong-Chae Chung ◽  
Sang-Hoon Rhee
Keyword(s):  
Binding Energies ◽  
Dissolution Behavior ◽  
Total System ◽  
Carbonate Apatite ◽  
In Vivo Test ◽  
Co Substitution ◽  
Constituent Elements ◽  
Low Crystalline ◽  
Charged Point

AbstractA defect structure and osseointegration capacity of sodium and chloride co-substituted hydroxyapatite (NaClAp) were newly studied. The NaClAp was prepared by reacting H3PO4 and Ca(OH)2 with NaNO3 and NH4Cl followed by sintering; pure hydroxyapatite (HAp) was synthesized as a control. After sintering, the co-substitution of Ca and OH with Na and Cl, respectively, produced charged point defects at Ca and PO4 sites. Also, OH molecules partially adopted a head-on structure. The calculated total system energy of NaClAp was higher, whereas the binding energies between each constituent elements and system were lower than those of HAp. These results suggest that NaClAp was less stable than HAp, due to the formation of various defects by co-substitution of Na and Cl. Indeed, NaClAp exhibited higher dissolution behavior in simulated body fluid (SBF) compared with HAp. Accordingly, this increased the capability to produce low crystalline hydroxyl carbonate apatite, likely due to the increasing degree of apatite supersaturation in SBF. Besides, the NaClAp granules showed noticeable improvements in osseointegration capacity four weeks after in vivo test compared with HAp. Collectively, these results imply that the defects made by multiple ion substitutions are useful to increase osseointegration capacity of hydroxyapatite.

scholarly journals Longitudinal in vivo evaluation of bone regeneration by combined measurement of multi-pinhole SPECT and micro-CT for tissue engineering

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Philipp S. Lienemann ◽  
Stéphanie Metzger ◽  
Anna-Sofia Kiveliö ◽  
Alain Blanc ◽  
Panagiota Papageorgiou ◽  
...  
Keyword(s):  
Computed Tomography ◽  
High Resolution ◽  
Bone Formation ◽  
Bone Regeneration ◽  
Bone Defects ◽  
Histological Evaluation ◽  
Biological Processes ◽  
Micro Ct ◽  
Pinhole Spect

Abstract Over the last decades, great strides were made in the development of novel implants for the treatment of bone defects. The increasing versatility and complexity of these implant designs request for concurrent advances in means to assess in vivo the course of induced bone formation in preclinical models. Since its discovery, micro-computed tomography (micro-CT) has excelled as powerful high-resolution technique for non-invasive assessment of newly formed bone tissue. However, micro-CT fails to provide spatiotemporal information on biological processes ongoing during bone regeneration. Conversely, due to the versatile applicability and cost-effectiveness, single photon emission computed tomography (SPECT) would be an ideal technique for assessing such biological processes with high sensitivity and for nuclear imaging comparably high resolution (<1 mm). Herein, we employ modular designed poly(ethylene glycol)-based hydrogels that release bone morphogenetic protein to guide the healing of critical sized calvarial bone defects. By combined in vivo longitudinal multi-pinhole SPECT and micro-CT evaluations we determine the spatiotemporal course of bone formation and remodeling within this synthetic hydrogel implant. End point evaluations by high resolution micro-CT and histological evaluation confirm the value of this approach to follow and optimize bone-inducing biomaterials.

Accelerated repair of cortical bone defects using a synthetic extracellular matrix to deliver human demineralized bone matrix

2006 ◽  
Vol 24 (7) ◽  
pp. 1454-1462 ◽  
Author(s):  
Yanchun Liu ◽  
Shama Ahmad ◽  
Xiao Zheng Shu ◽  
R. Kent Sanders ◽  
Sally Anne Kopesec ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Cortical Bone ◽  
Demineralized Bone Matrix ◽  
Bone Matrix ◽  
Bone Defects ◽  
Demineralized Bone

scholarly journals Physical and Histological Comparison of Hydroxyapatite, Carbonate Apatite, and β-Tricalcium Phosphate Bone Substitutes

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1993 ◽  
Author(s):  
Kunio Ishikawa ◽  
Youji Miyamoto ◽  
Akira Tsuchiya ◽  
Koichiro Hayashi ◽  
Kanji Tsuru ◽  
...  
Keyword(s):  
Bone Formation ◽  
Bone Defect ◽  
Tricalcium Phosphate ◽  
Bone Substitutes ◽  
Physiological Solution ◽  
Tissue Response ◽  
Histological Evaluation ◽  
Carbonate Apatite ◽  
Artificial Bone ◽  
New Bone Formation

Three commercially available artificial bone substitutes with different compositions, hydroxyapatite (HAp; Neobone®), carbonate apatite (CO3Ap; Cytrans®), and β-tricalcium phosphate (β-TCP; Cerasorb®), were compared with respect to their physical properties and tissue response to bone, using hybrid dogs. Both Neobone® (HAp) and Cerasorb® (β-TCP) were porous, whereas Cytrans® (CO3Ap) was dense. Crystallite size and specific surface area (SSA) of Neobone® (HAp), Cytrans® (CO3Ap), and Cerasorb® (β-TCP) were 75.4 ± 0.9 nm, 30.8 ± 0.8 nm, and 78.5 ± 7.5 nm, and 0.06 m2/g, 18.2 m2/g, and 1.0 m2/g, respectively. These values are consistent with the fact that both Neobone® (HAp) and Cerasorb® (β-TCP) are sintered ceramics, whereas Cytrans® (CO3Ap) is fabricated in aqueous solution. Dissolution in pH 5.3 solution mimicking Howship’s lacunae was fastest in CO3Ap (Cytrans®), whereas dissolution in pH 7.3 physiological solution was fastest in β-TCP (Cerasorb®). These results indicated that CO3Ap is stable under physiological conditions and is resorbed at Howship’s lacunae. Histological evaluation using hybrid dog mandible bone defect model revealed that new bone was formed from existing bone to the center of the bone defect when reconstructed with CO3Ap (Cytrans®) at week 4. The amount of bone increased at week 12, and resorption of the CO3Ap (Cytrans®) was confirmed. β-TCP (Cerasorb®) showed limited bone formation at week 4. However, a larger amount of bone was observed at week 12. Among these three bone substitutes, CO3Ap (Cytrans®) demonstrated the highest level of new bone formation. These results indicate the possibility that bone substitutes with compositions similar to that of bone may have properties similar to those of bone.

Enhancement of Bone Healing by Local Administration of Carbon Nanotubes Functionalized with Sodium Hyaluronate in Rat Tibiae

2017 ◽  
Vol 204 (3-4) ◽  
pp. 137-149 ◽  
Author(s):  
Vanessa B. Andrade ◽  
Marcos A. Sá ◽  
Renato M. Mendes ◽  
Paulo A. Martins-Júnior ◽  
Gerluza A.B. Silva ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Bone Repair ◽  
Bone Matrix ◽  
Sodium Hyaluronate ◽  
Repair Process ◽  
Bone Defects ◽  
Bone Morphogenetic Protein 2 ◽  
Morphogenetic Protein ◽  
Bone Trabeculae ◽  
Endothelial Growth Factor

It has been reported that carbon nanotubes (CNTs) serve as nucleation sites for the deposition of bone matrix and cell proliferation. Here, we evaluated the effects of multi-walled CNTs (MWCNTs) on bone repair of rat tibiae. Furthermore, because sodium hyaluronate (HY) accelerates bone restoration, we associated CNTs with HY (HY-MWCNTs) in an attempt to boost bone repair. The bone defect was created by a 1.6-mm-diameter drill. After 7 and 14 days, tibiae were processed for histological and morphometric analyses. Immunohistochemistry was used to evaluate the expression of vascular endothelial growth factor (VEGF) in bone defects. Expression of osteocalcin (OCN), bone morphogenetic protein-2 (BMP-2), and collagen I (Col I) was assessed by real-time PCR. Histomorphometric analysis showed a similar increase in the percentage of bone trabeculae in tibia bone defects treated with HY and HY-MWCNTs, and both groups presented more organized and thicker bone trabeculae than nontreated defects. Tibiae treated with MWCNTs or HY- MWCNTs showed a higher expression of VEGF. Treatment with MWCNTs or HY-MWCNTs increased the expression of molecules involved in the bone repair process, such as OCN and BMP-2. Also, HY- and MWCNT-treated tibiae had an increased expression of Col I. Thus, it is tempting to conclude that CNTs associated or not with other materials such as HY emerged as a promising biomaterial for bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document