scholarly journals Fabrication and Spectral Properties of Wood-Based Luminescent Nanocomposites

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Xianjun Li ◽  
Yun Li ◽  
Yongfeng Luo ◽  
Qunying Mou ◽  
Xingong Li ◽  
...  
Keyword(s):  
Blue Light ◽  
Conventional Method ◽  
Spectral Properties ◽  
Urea Formaldehyde ◽  
Broad Band ◽  
Green Emission ◽  
Formaldehyde Resin ◽  
Luminescent Materials ◽  
Bluish Green ◽  
Modified Wood

Pressure impregnation pretreatment is a conventional method to fabricate wood-based nanocomposites. In this paper, the wood-based luminescent nanocomposites were fabricated with the method and its spectral properties were investigated. The results show that it is feasible to fabricate wood-based luminescent nanocomposites using microwave modified wood and nanophosphor powders. The luminescent strength is in positive correlation with the amount of phosphor powders dispersed in urea-formaldehyde resin. Phosphors absorb UV and blue light efficiently in the range of 400–470 nm and show a broad band of bluish-green emission centered at 500 nm, which makes them good candidates for potential blue-green luminescent materials.

scholarly journals Effects of Three Biomass Fillers on the Properties of Melamine Modified Urea-Formaldehyde Resin

2020 ◽  
Vol 782 ◽  
pp. 022077
Author(s):  
Shanfeng Xu ◽  
Sanshan Xia ◽  
Yuzhu Chen ◽  
Hui Xiao ◽  
Maoyu Yi ◽  
...  
Keyword(s):  
Urea Formaldehyde ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Modified Urea

scholarly journals Calcium carbonate modified urea–formaldehyde resin adhesive for strength enhanced medium density fiberboard production

RSC Advances ◽  
2021 ◽  
Vol 11 (40) ◽  
pp. 25010-25017
Author(s):  
Li Lu ◽  
Yan Wang ◽  
Tianhua Li ◽  
Supeng Wang ◽  
Shoulu Yang ◽  
...  
Keyword(s):  
Calcium Carbonate ◽  
Urea Formaldehyde ◽  
Medium Density Fiberboard ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Medium Density ◽  
Ionic Bond ◽  
Resin Adhesive ◽  
Uf Resin ◽  
Modified Urea

Reactions between CaCO3 and CH2O2 during polycondensation of UF resin produce Ca2+. Ionic bond complexation binds Ca2+ with UF resin. The UF resin crystalline percentage decreases from 26.86% to 22.71%. IB strength of resin bonded fiberboard increases from 0.75 to 0.94 MPa.

scholarly journals Fabrication of microcapsule extinguishing agent with core-shell structure for lithium-ions battery fire safety

2021 ◽  
Author(s):  
Weixin Zhang ◽  
Lin Wu ◽  
Dujin Qiao ◽  
Jie Tian ◽  
Yan Li ◽  
...  
Keyword(s):  
Large Scale ◽  
Urea Formaldehyde ◽  
Lithium Ion ◽  
Formaldehyde Resin ◽  
Shell Material ◽  
Lithium Ions ◽  
Safety Issues ◽  
Fire Extinguishing ◽  
New Type ◽  
Core Shell Structure

Safety issues limit the large-scale application of lithium-ion batteries. In this work, a new type of N-H-microcapsule fire extinguishing agent is prepared by using melamine-urea-formaldehyde resin as shell material, perfluoro(2-methyl-3-pentanone)...

Effect of spent sulfite liquor on urea-formaldehyde resin performance

2018 ◽  
Vol 136 (17) ◽  
pp. 47389 ◽  
Author(s):  
Ana Maria Ferreira ◽  
João Pereira ◽  
Margarida Almeida ◽  
João Ferra ◽  
Nádia Paiva ◽  
...  
Keyword(s):  
Urea Formaldehyde ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Spent Sulfite Liquor

Preparation and Characterization of Hexadecane Microcapsule Phase Change Materials by In Situ Polymerization

2013 ◽  
Vol 815 ◽  
pp. 367-370 ◽  
Author(s):  
Xiao Qiu Song ◽  
Yue Xia Li ◽  
Jing Wen Wang
Keyword(s):  
Particle Size ◽  
Phase Change ◽  
Phase Change Materials ◽  
In Situ Polymerization ◽  
Urea Formaldehyde ◽  
Agitation Speed ◽  
Urea Formaldehyde Resin ◽  
Formaldehyde Resin ◽  
Mass Ratio

Hexadecane microcapsule phase change materials were prepared by the in-situ polymerization method using hexadecane as core materials, urea-formaldehyde resin and urea-formaldehyde resin modified with melamine as shell materials respectively. Effect of melamine on the properties of microcapsules was studied by FTIR, biomicroscopy (UBM), TGA and HPLC. The influences of system concentration, agitation speed and mass ratio of wall to core were also investigated. The results indicated that hexadecane was successfully coated by the two types of shell materials. The addition of melamine into the urea-formaldehyde resin microcapsule reduced microcapsule particle size and microencapsulation efficiency. The influences of factors such as system concentration, agitation speed and mass ratio of wall to core to different wall materials microcapsules presented different variety trends of the microcapsule particle size.

Manufacture of thin rice straw particleboards bonded with various polymeric methane diphenyl diisocyanate/ urea formaldehyde resin mixtures

BioResources ◽  
2019 ◽  
Vol 15 (1) ◽  
pp. 935-944
Author(s):  
Peng Luo ◽  
Chuanmin Yang ◽  
Mengyao Li ◽  
Yueqi Wang
Keyword(s):  
Mechanical Properties ◽  
Rice Straw ◽  
Water Resistance ◽  
Urea Formaldehyde ◽  
Single Layer ◽  
Formaldehyde Resin ◽  
Manufacturing Cost ◽  
Board Density ◽  
Layer Medium ◽  
Resin Formulation

Reducing particleboard thickness is one of the major approaches to decrease consumption volume of particleboard for furniture manufacture. This study employed an adhesive mixture of polymeric methane diphenyl diisocyanate (PMDI) and urea formaldehyde (UF) to produce single-layer medium density thin rice straw particleboard. The effects of various PMDI/UF formulations as well as board density on mechanical properties and water resistance of rice straw particleboard were studied. The results indicated that the mechanical properties and water resistance of the thin rice straw particleboard were appreciably affected by resin formulation. The panels bonded with PMDI/UF adhesive mixtures had mechanical properties and water resistance far superior to those bonded with UF. Higher PMDI content levels in resin mixtures led to improved mechanical properties and water resistance. Density influenced mechanical properties and water resistance of the thin rice straw particleboard. Increasing the density of the panel could upgrade the mechanical properties of the thin rice straw particleboard. The experimental outcomes showed that PMDI/UF resin systems had potential to substitute for pure PMDI resin in producing thin rice straw particleboard, which could effectively lower manufacturing cost and bring economic efficiencies due to reduced amount of pricey PMDI.

Sign in / Sign up

Export Citation Format

Share Document