scholarly journals Low Voltage Floating Gate MOS Transistor Based Differential Voltage Squarer

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Maneesha Gupta ◽  
Richa Srivastava ◽  
Urvashi Singh
Keyword(s):  
Low Voltage ◽  
Supply Voltage ◽  
Order Effect ◽  
Floating Gate ◽  
Current Output ◽  
Mos Transistor ◽  
Differential Voltage ◽  
Saturation Region ◽  
Linear Differential ◽  
Low Supply Voltage

This paper presents novel floating gate MOSFET (FGMOS) based differential voltage squarer using FGMOS characteristics in saturation region. The proposed squarer is constructed by a simple FGMOS based squarer and linear differential voltage attenuator. The squarer part of the proposed circuit uses one of the inputs of two-input FGMOS transistor for threshold voltage cancellation so as to implement a perfect squarer function, and the differential voltage attenuator part acts as input stage so as to generate the differential signals. The proposed circuit provides a current output proportional to the square of the difference of two input voltages. The second order effect caused by parasitic capacitance and mobility degradation is discussed. The circuit has advantages such as low supply voltage, low power consumption, and low transistor count. Performance of the circuit is verified at ±0.75 V in TSMC 0.18 μm CMOS, BSIM3, and Level 49 technology by using Cadence Spectre simulator.

ULTRA-LOW VOLTAGE TUNABLE TRANSCONDUCTOR BASED ON BULK-DRIVEN QUASI-FLOATING-GATE TECHNIQUE

2013 ◽  
Vol 22 (08) ◽  
pp. 1350073 ◽  
Author(s):  
FABIAN KHATEB ◽  
NABHAN KHATIB ◽  
PIPAT PROMMEE ◽  
WINAI JAIKLA ◽  
LUKAS FUJCIK
Keyword(s):  
Power Consumption ◽  
Low Voltage ◽  
Supply Voltage ◽  
Floating Gate ◽  
Low Power Consumption ◽  
Mos Transistor ◽  
External Resistor ◽  
Multifunction Filter ◽  
Simulation Results ◽  
Low Supply Voltage

This paper presents ultra-low voltage transconductor using a new bulk-driven quasi-floating-gate technique (BD-QFG). This technique leads to significant increase in the transconductance and the bandwidth values of the MOS transistor (MOST) under ultra-low voltage condition. The proposed CMOS structure of the transconductor is capable to work with ultra-low supply voltage of ±300 mV and low power consumption of 18 μW. The transconductance value of the transconductor is tunable by external resistor with wide linear range. To prove the validation of the new described technique a second-order Gm-C multifunction filter is presented as one of the possible applications. The simulation results using 0.18 μm CMOS N-Well process from TSMC show the attractive features of the proposed circuit.

NEGATIVE RESISTANCE ACTIVE RESISTOR WITH IMPROVED LINEARITY AND FREQUENCY RESPONSE

2009 ◽  
Vol 18 (01) ◽  
pp. 1-10 ◽  
Author(s):  
COSMIN POPA
Keyword(s):  
Frequency Response ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Negative Resistance ◽  
Original Method ◽  
Order Effects ◽  
Mos Transistors ◽  
Mos Transistor ◽  
Saturation Region ◽  
Linear Differential

An original active resistor circuit will be presented. The main advantages of the new proposed implementations are the improved linearity, small area consumption and improved frequency response. An original technique for linearizing the I(V) characteristic of the active resistor will be proposed, based on the utilization of a new linear differential amplifier, and on a current-pass circuit. The linearization of the original differential structure is achieved by compensating the quadratic characteristic of the MOS transistor operating in the saturation region by an original square-root circuit. The errors introduced by the second-order effects will be strongly reduced, while the circuit frequency response of the circuit is very good as a result of operating all MOS transistors in the saturation region. In order to design a circuit having a negative equivalent resistance, an original method specific to the proposed implementation of the active resistor circuit will be presented. The circuit is implemented in 0.35 μm CMOS technology, the SPICE simulation confirming the theoretical estimated results and showing a linearity error under a percent for an extended input range (± 500 mV) and a small value of the supply voltage (± 3 V).

A New Low Voltage Analog Circuit Model for Hodgkin–Huxley Neuron Employing FGMOS Transistors

2018 ◽  
Vol 27 (09) ◽  
pp. 1850141
Author(s):  
Ava Salmanpour ◽  
Ebrahim Farshidi ◽  
Karim Ansari Asl
Keyword(s):  
Analog Circuit ◽  
Low Voltage ◽  
Supply Voltage ◽  
Circuit Complexity ◽  
Circuit Model ◽  
Weak Inversion ◽  
Combined Action ◽  
Low Costs ◽  
Low Supply Voltage ◽  
Channel Currents

A low voltage analog VLSI circuit model for Hodgkin–Huxley (HH) neuron cell equations (HH neuron model) is presented. Floating gate MOSFET (FGMOS) transistors in weak inversion region have been used to model HH equations such as gating variables, [Formula: see text] and [Formula: see text] functions and combined action of [Formula: see text], [Formula: see text] and [Formula: see text]. The combination of [Formula: see text], [Formula: see text] and [Formula: see text] controls the Na[Formula: see text] and K[Formula: see text] channel currents. The superiorities of the proposed circuits are low supply voltage, low power consumption, less circuit complexity and as a result, low costs are compared to the previous works. The proposed circuit which uses 24 transistors is simulated in Hspice software using 0.18[Formula: see text] technology and consumes 119[Formula: see text][Formula: see text]W.

Performance of a Simple Highly-Linear MOS Analog Mixer

1997 ◽  
Vol 07 (05) ◽  
pp. 495-504 ◽  
Author(s):  
Kin Chung Mak ◽  
Howard Cam Luong
Keyword(s):  
Power Supply ◽  
Low Voltage ◽  
Mos Transistor ◽  
The Core ◽  
Saturation Region ◽  
Input Range ◽  
Region Theory

A low-voltage MOS analog mixer using a cross-coupled pair as the core is described. The mixing operation is based on the square-law characteristic of MOS transistor operating in the saturation region. Theory, simulation and measurement show that the mixing characteristic is superior and not sensitive to device mismatches. The realized mixer achieved a DC nonlinearity of less than 0.7% experimentally within an input range of 0.6 Vp-p. The measured IM3 and IMFDR3 are 22.5 dBm and -46.7 dB respectively. It consumes 2 mW power from a single 3.3 V power supply. The active die area is 200 μm × 150 μm.

scholarly journals A design of low voltage OPAMP using split-length transistors

2014 ◽  
Vol 17 (1) ◽  
pp. 62-70
Author(s):  
Khanh Trung Le ◽  
Tu Trong Bui ◽  
Hung Duc Le ◽  
Kha Cong Pham
Keyword(s):  
High Performance ◽  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Feedback Systems ◽  
Advanced Technique ◽  
Low Voltage Operation ◽  
Feedback Compensation ◽  
Indirect Feedback ◽  
Low Supply Voltage

In the paper, we present a design of a low voltage Operation Amplifier (OPAMP) circuit using split-length transistors. Indirect feedback compensation is an advanced technique used to stabilize the operation of an OPAMP. Cascode transistors are usually implemented for indirect feedback systems. However, these transistors are not suitable for low voltage design. In this study, we have taken advantage of split-length transistors and indirect feedback compensation technique to design a high performance OPAMP. As a result, the OPAMP operates not only at low supply voltage but also at high frequency. The OPAMP has been designed and fabricated in a 0.18um CMOS technology. This OPAMP achieves 100 dB gain, 90 MHz unity gain frequency and 60 degrees phase margin at 2 V supply voltage.

130 nm CMOS Bulk-Driven Variable Gain Amplifier for Low-Voltage Applications

2017 ◽  
Vol 26 (08) ◽  
pp. 1740003 ◽  
Author(s):  
Daniel Arbet ◽  
Viera Stopjaková ◽  
Martin Kováč ◽  
Lukáš Nagy ◽  
Matej Rakús ◽  
...  
Keyword(s):  
Low Voltage ◽  
Supply Voltage ◽  
Input Voltage ◽  
Cmos Technology ◽  
Variable Gain Amplifier ◽  
Voltage Range ◽  
Variable Gain ◽  
Wide Scale ◽  
Simulation Results ◽  
Low Supply Voltage

In this paper, a variable gain amplifier (VGA) designed in 130 nm CMOS technology is presented. The proposed amplifier is based on the bulk-driven (BD) design approach, which brings a possibility to operate with low supply voltage. Since the supply voltage of only 0.6 V is used for the amplifier to operate, there is no risk of latch-up event that usually represents the main drawback of the BD circuit systems. BD transistors are employed in the input differential stage, which makes it possible to operate in rail-to-rail input voltage range. Achieved simulation results indicate that gain of the proposed VGA can be varied in a wide scale, which together with the low supply voltage feature make the proposed amplifier useful for low-voltage and low-power applications. An additional circuit responsible for maintaining the linear-in-decibel gain dependency of the VGA is also addressed. The proposed circuit block avails arbitrary shaping of the curve characterizing the gain versus the controlling voltage dependency.

LOW VOLTAGE, LOW POWER CHEBYSHEV FILTER IN 0.18 μm CMOS TECHNOLOGY

2013 ◽  
Vol 22 (07) ◽  
pp. 1350053 ◽  
Author(s):  
S. REKHA ◽  
T. LAXMINIDHI
Keyword(s):  
Low Power ◽  
Dynamic Range ◽  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Transconductance Amplifier ◽  
Low Pass ◽  
Unity Gain ◽  
Design Centering ◽  
Low Supply Voltage

This paper presents an active-RC continuous time filter in 0.18 μm standard CMOS technology intended to operate on a very low supply voltage of 0.5 V. The filter designed, has a 5th order Chebyshev low pass response with a bandwidth of 477 kHz and 1-dB passband ripple. A low-power operational transconductance amplifier (OTA) is designed which makes the filter realizable. The OTA uses bulk-driven input transistors and feed-forward compensation in order to increase the Dynamic Range and Unity Gain Bandwidth, respectively. The paper also presents an equivalent circuit of the OTA and explains how the filter can be modeled using descriptor state-space equations which will be used for design centering the filter in the presence of parasitics. The designed filter offers a dynamic range of 51.3 dB while consuming a power of 237 μW.

scholarly journals 1.5-V CMOS Current Multiplier/Divider

2018 ◽  
Vol 8 (3) ◽  
pp. 1478 ◽  
Author(s):  
Jetsdaporn Satansup ◽  
Worapong Tangsrirat
Keyword(s):  
Low Voltage ◽  
Supply Voltage ◽  
Current Mode ◽  
Cmos Technology ◽  
Signal Frequency ◽  
Total Power ◽  
Total Power Consumption ◽  
Linearity Error ◽  
Low Supply Voltage ◽  
Circuit Technique

A circuit technique for designing a compact low-voltage current-mode multiplier/divider circuit in CMOS technology is presented.  It is based on the use of a compact current quadratic cell able to operate at low supply voltage.  The proposed circuit is designed and simulated for implementing in TSMC 0.25-m CMOS technology with a single supply voltage of 1.5 V.  Simulation results using PSPICE, accurately agreement with theoretical ones, have been provided, and also demonstrate a maximum linearity error of 1.5%, a THD less than 2% at 100 MHz, a total power consumption of 508 W, and -3dB small-signal frequency of about 245 MHz.

Sign in / Sign up

Export Citation Format

Share Document