scholarly journals Analysis of DC Electrical Conductivity Models of Carbon Nanotube-Polymer Composites with Potential Application to Nanometric Electronic Devices

2013 ◽  
Vol 2013 ◽  
pp. 1-14 ◽  
Author(s):  
Rafael Vargas-Bernal ◽  
Gabriel Herrera-Pérez ◽  
Ma. Elena Calixto-Olalde ◽  
Margarita Tecpoyotl-Torres
Keyword(s):  
Electrical Conductivity ◽  
Carbon Nanotube ◽  
Electrical Properties ◽  
Polymer Composites ◽  
Electronic Devices ◽  
Electrical Performance ◽  
Design Parameters ◽  
Main Design ◽  
Dc Electrical Conductivity ◽  
Conductivity Models

The design of nanometric electronic devices requires novel materials for improving their electrical performance from stages of design until their fabrication. Until now, several DC electrical conductivity models for composite materials have been proposed. However, these models must be valued to identify main design parameters that more efficiently control the electrical properties of the materials to be developed. In this paper, four different models used for modeling DC electrical conductivity of carbon nanotube-polymer composites are studied with the aim of obtaining a complete list of design parameters that allow guarantying to the designer an increase in electrical properties of the composite by means of carbon nanotubes.

scholarly journals Parametric Analysis of Electrical Conductivity of Polymer-Composites

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1250 ◽  
Author(s):  
Oladipo Folorunso ◽  
Yskandar Hamam ◽  
Rotimi Sadiku ◽  
Suprakas Sinha Ray ◽  
Adekoya Gbolahan Joseph
Keyword(s):  
Electrical Conductivity ◽  
Polymer Composites ◽  
Parametric Analysis ◽  
Electronic Device ◽  
Design Parameters ◽  
Mechanical Degradation ◽  
Manufacturing Cost ◽  
Fuel Cell Electrodes ◽  
Electrical Conductivities ◽  
Conductivity Models

The problem associated with mixtures of fillers and polymers is that they result in mechanical degradation of the material (polymer) as the filler content increases. This problem will increase the weight of the material and manufacturing cost. For this reason, experimentation on the electrical conductivities of the polymer-composites (PCs) is not enough to research their electrical properties; models have to be adopted to solve the encountered challenges. Hitherto, several models by previous researchers have been developed and proposed, with each utilizing different design parameters. It is imperative to carry out analysis on these models so that the suitable one is identified. This paper indeed carried out a comprehensive parametric analysis on the existing electrical conductivity models for polymer composites. The analysis involves identification of the parameters that best predict the electrical conductivity of polymer composites for energy storage, viz: (batteries and capacitor), sensors, electronic device components, fuel cell electrodes, automotive, medical instrumentation, cathode scanners, solar cell, and military surveillance gadgets applications. The analysis showed that the existing models lack sufficient parametric ability to determine accurately the electrical conductivity of polymer-composites.

Effect of Gamma Radiation on Structural, Optical and Electrical Properties of nanostructured CdHgTe Thin Films

2018 ◽  
Vol 1 (1) ◽  
pp. 26-31 ◽  
Author(s):  
B Babu ◽  
K Mohanraj ◽  
S Chandrasekar ◽  
N Senthil Kumar ◽  
B Mohanbabu
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Electrical Properties ◽  
Gamma Radiation ◽  
Glass Substrate ◽  
Gamma Ray ◽  
Optical And Electrical Properties ◽  
Deposition Technique ◽  
Polycrystalline Structure ◽  
Dc Electrical Conductivity

CdHgTe thin films were grown onto glass substrate via the Chemical bath deposition technique. XRD results indicate that a CdHgTe formed with a cubic polycrystalline structure. The crystallinity of CdHgTe thin films is gradually deteriorate with increasing the gamma irradiation. EDS spectrums confirms the presence of Cd, Hg and Te elements. DC electrical conductivity results depicted the conductivity of CdHgTe increase with increasing a gamma ray dosage

Effect of the structure of cellulose acetate membranes on their permeability, electrical conductivity and rejection

1990 ◽  
Vol 55 (12) ◽  
pp. 2933-2939 ◽  
Author(s):  
Hans-Hartmut Schwarz ◽  
Vlastimil Kůdela ◽  
Klaus Richau
Keyword(s):  
Electrical Conductivity ◽  
Electrical Properties ◽  
Cellulose Acetate ◽  
Reverse Osmosis ◽  
Water Flux ◽  
Cellulose Acetate Membrane ◽  
Structure Parameters ◽  
Dc Electrical Conductivity ◽  
Cellulose Acetate Membranes

Ultrafiltration cellulose acetate membrane can be transformed by annealing into reverse osmosis membranes (RO type). Annealing brings about changes in structural properties of the membranes, accompanied by changes in their permeability behaviour and electrical properties. Correlations between structure parameters and electrochemical properties are shown for the temperature range 20-90 °C. Relations have been derived which explain the role played by the dc electrical conductivity in the characterization of rejection ability of the membranes in the reverse osmosis, i.e. rRO = (1 + exp (A-B))-1, where exp A and exp B are statistically significant correlation functions of electrical conductivity and salt permeation, or of electrical conductivity and water flux through the membrane, respectively.

Studies on Polyaniline: Polyethyleneterephthalate Films

2006 ◽  
Vol 111 ◽  
pp. 99-102 ◽  
Author(s):  
A.A. Ahmed ◽  
Faiz Mohammad
Keyword(s):  
Electrical Conductivity ◽  
Electrical Properties ◽  
Arrhenius Equation ◽  
Great Increase ◽  
Thermooxidative Stability ◽  
Ambient Conditions ◽  
Dc Electrical Conductivity ◽  
The Stability ◽  
Almost All ◽  
Conductivity Retention

The films of polyaniline:polyethyleneterephthalate films were prepared by polymerizing aniline soaked in polyethyleneterephthalate films of different thicknesses. The films were characterized by FTIR as well as for their electrical properties. The electrical properties of the films were observed to be of good quality as almost all the films showed a great increase in their electrical conductivity from insulator to semiconductor region after doping with hydrochloric acid. All the films in their doped state follow the Arrhenius equation for the temperature dependence of electrical conductivity from 35 to 115oC. The thermooxidative stability was studied by thermogravimetry and differential thermal analysis. The stability in terms of dc electrical conductivity retention was also studied under ambient conditions by two slightly different techniques viz. isothermal and cyclic techniques. The dc electrical conductivity of the films was found to be stable below 90oC for all the films under ambient conditions.

Mechanical and Electrical Properties of Carbon Nanotube / Polydimethylsiloxane Composites Yarn

2016 ◽  
Vol 11 (4) ◽  
pp. 155892501601100 ◽  
Author(s):  
Wei Liu ◽  
Fujun Xu ◽  
Nianhua Zhu ◽  
Shuang Wang
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Carbon Nanotube ◽  
Electrical Properties ◽  
Strain Sensors ◽  
Electromechanical Properties ◽  
Average Strength ◽  
Mechanical And Electrical Properties ◽  
Carbon Nano Tube ◽  
Droplet Infiltration

Carbon nano tube (CNT) yarn is an axially aligned CNT assembly. It has great potential many applications. In this study, the mechanical and electrical properties of the aerogel-spun CNT yarns and CNT/Polydimethylsiloxane (PDMS) composite yarns were investigated. The CNT/PDMS yarn was fabricated by droplet infiltration of PDMS solution into the aerogel-spun CNT yarn. The mechanical properties of the CNT/PDMS yarns were significantly improved with an average strength of 837.29 MPa and modulus of 3.66 GPa, over 100% improvement compared to the original CNT yarns. The electrical conductivity of the CNT/PDMS yarn increased from 1636 S/cm to 3555 S/cm. The electromechanical properties of CNT/PDMS yarns demonstrated that such CNT yarn could be suitable for strain sensors.

Sign in / Sign up

Export Citation Format

Share Document