Flexible Photoanode for Dye-Sensitized Solar Cells with Outstanding Short-Circuit Current Based on Magnesium Oxide-Coated Tin Dioxide Films

2013 ◽  
Vol 161 (1) ◽  
pp. H6-H10 ◽  
Author(s):  
Shengjun Li ◽  
Zeng Chen ◽  
Yanyan Wang ◽  
Tao Li ◽  
Binghua Xu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Magnesium Oxide ◽  
Tin Dioxide ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Effects of Activated Carbon Counter Electrode on Bifacial Dye Sensitized Solar Cells (DSSCs)

2021 ◽  
Vol 1016 ◽  
pp. 863-868
Author(s):  
Tika Erna Putri ◽  
Yuan Hao ◽  
Fadzai Lesley Chawarambwa ◽  
Hyunwoong Seo ◽  
Min Kyu Son ◽  
...  
Keyword(s):  
Solar Cells ◽  
Activated Carbon ◽  
Counter Electrode ◽  
Low Cost ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Optical Losses ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

The losses of solar cells are consisted of electrical losses and optical losses. Optical losses chiefly reduce the short-circuit current. Here we apply bifacial cell approach to increase light absorption and the short-circuit current of dye sensitized solar cells (DSSCs). We have employed activated carbon (AC) as a very low cost counter electrode, an alternative to Pt counter electrode. Addition of dimethyl sulfoxide (DMSO) and titanium carbonitride (TiCN) to AC increase the efficiency of bifacial DSSC at a mirror angle of from 5.10% to and , respectively. These results indicate that AC has the potential to replace Pt as a very low cost counter electrode of bifacial DSSCs. The bifacial DSSC system using double plane mirrors improve PCE to for Pt counter electrode at a mirror angle of , and for AC counter electrode at a mirror angle of , respectively.

scholarly journals Toward Current Matching in Tandem Dye-Sensitized Solar Cells

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2936
Author(s):  
Junfeng Wei ◽  
Zhipeng Shao ◽  
Bin Pan ◽  
Shuanghong Chen ◽  
Linhua Hu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Dye Sensitized ◽  
Current Matching ◽  
Current Densities ◽  
Experimental Findings ◽  
Photovoltaic Technologies ◽  
Sensitized Solar Cells

The tandem pn-type dye-sensitized solar cells (pn-DSCs) have received much attention in the field of photovoltaic technologies because of their great potential to overcome the Shockley-Queisser efficiency limitation that applies to single junction photovoltaic devices. However, factors governing the short-circuit current densities (Jsc) of pn-DSC remain unclear. It is typically believed that Jsc of the pn-DSC is limited to the highest one that the two independent photoelectrodes can achieve. In this paper, however, we found that the available Jsc of pn-DSC is always determined by the larger Jsc that the photoanode can achieve but not by the smaller one in the photocathode. Such experimental findings were verified by a simplified series circuit model, which shows that a breakdown will occur on the photocathode when the photocurrent goes considerably beyond its threshold voltage, thus leading to an abrupt increase in Jsc of the circuit. The simulation results also suggest that a higher photoconversion efficiency of the pn-DSCs can be only achieved when an almost equivalent photocurrent is achieved for the two photoelectrodes.

scholarly journals Prunus domestica dye extraction for fabrication of zinc oxide based dye-sensitized solar cells

BIBECHANA ◽  
2015 ◽  
Vol 13 ◽  
pp. 23-28
Author(s):  
Leela Pradhan Joshi
Keyword(s):  
Zinc Oxide ◽  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Zinc Nitrate ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Dye Extraction ◽  
Sensitized Solar Cells

Aluminium doped Zinc Oxide (AZO) seed layers were deposited on Fluorine doped Tin Oxide (FTO) substrates using a spin coating technique. These were then immersed in growth solutions of zinc nitrate, hexamethylenetetramine and distilled water to develop nanoplates of Zinc Oxide (ZnO). The nanostructures of ZnO grown on FTO were studied using x-ray diffraction techniques. Dye-sensitized solar cells (DSSC) were fabricated using two prepared electrodes, one of dye-loaded zinc oxide and another that was platinum coated. The electrolyte used was potassium iodide iodine solution. The performance of the assembled DSCCs was tested by drawing an IV curve. The results showed that the short circuit current and open circuit voltages were about 10 microamperes and 270 millivolts respectively.BIBECHANA 13 (2016) 23-28

scholarly journals Dye-sensitized solar cells with natural dyes extracted from plant seeds

2014 ◽  
Vol 32 (4) ◽  
pp. 547-554 ◽  
Author(s):  
Hatem El-Ghamri ◽  
Taher El-Agez ◽  
Sofyan Taya ◽  
Monzir Abdel-Latif ◽  
Amal Batniji
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Tio2 Film ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Natural Dyes ◽  
Plant Seeds ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

AbstractThe application of natural dyes extracted from plant seeds in the fabrication of dye-sensitized solar cells (DSSCs) has been explored. Ten dyes were extracted from different plant seeds and used as sensitizers for DSSCs. The dyes were characterized using UV-Vis spectrophotometry. DSSCs were prepared using TiO2 and ZnO nanostructured mesoporous films. The highest conversion efficiency of 0.875 % was obtained with an allium cepa (onion) extract-sensitized TiO2 solar cell. The process of TiO2-film sintering was studied and it was found that the sintering procedure significantly affects the response of the cell. The short circuit current of the DSSC was found to be considerably enhanced when the TiO2 semiconducting layer was sintered gradually.

scholarly journals There Is a Future for N-Heterocyclic Carbene Iron(II) Dyes in Dye-Sensitized Solar Cells: Improving Performance through Changes in the Electrolyte

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4181 ◽  
Author(s):  
Mariia Karpacheva ◽  
Vanessa Wyss ◽  
Catherine E. Housecroft ◽  
Edwin C. Constable
Keyword(s):  
Solar Cells ◽  
Alkyl Chain ◽  
Electrochemical Impedance ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Open Circuit ◽  
Ion Concentration ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

By systematic tuning of the components of the electrolyte, the performances of dye-sensitized solar cells (DSCs) with an N-heterocyclic carbene iron(II) dye have been significantly improved. The beneficial effects of an increased Li+ ion concentration in the electrolyte lead to photoconversion efficiencies (PCEs) up to 0.66% for fully masked cells (representing 11.8% relative to 100% set for N719) and an external quantum efficiency maximum (EQEmax) up to approximately 25% due to an increased short-circuit current density (JSC). A study of the effects of varying the length of the alkyl chain in 1-alkyl-3-methylimidazolium iodide ionic liquids (ILs) shows that a longer chain results in an increase in JSC with an overall efficiency up to 0.61% (10.9% relative to N719 set at 100%) on going from n-methyl to n-butyl chain, although an n-hexyl chain leads to no further gain in PCE. The results of electrochemical impedance spectroscopy (EIS) support the trends in JSC and open-circuit voltage (VOC) parameters. A change in the counterion from I− to [BF4]− for 1-propyl-3-methylimidazolium iodide ionic liquid leads to DSCs with a remarkably high JSC value for an N-heterocyclic carbene iron(II) dye of 4.90 mA cm−2, but a low VOC of 244 mV. Our investigations have shown that an increased concentration of Li+ in combination with an optimized alkyl chain length in the 1-alkyl-3-methylimidazolium iodide IL in the electrolyte leads to iron(II)-sensitized DSC performances comparable with those of containing some copper(I)-based dyes.

scholarly journals Performance of natural-dye-sensitized solar cells by ZnO nanorod and nanowall enhanced photoelectrodes

2017 ◽  
Vol 8 ◽  
pp. 287-295 ◽  
Author(s):  
Saif Saadaoui ◽  
Mohamed Aziz Ben Youssef ◽  
Moufida Ben Karoui ◽  
Rached Gharbi ◽  
Emanuele Smecca ◽  
...  
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Growth Time ◽  
Dye Sensitized ◽  
Different Temperatures ◽  
Photovoltaic Parameters ◽  
Anchoring Groups ◽  
Sensitized Solar Cells

In this work, two natural dyes extracted from henna and mallow plants with a maximum absorbance at 665 nm were studied and used as sensitizers in the fabrication of dye-sensitized solar cells (DSSCs). Fourier transform infrared (FTIR) spectra of the extract revealed the presence of anchoring groups and coloring constituents. Two different structures were prepared by chemical bath deposition (CBD) using zinc oxide (ZnO) layers to obtain ZnO nanowall (NW) or nanorod (NR) layers employed as a thin film at the photoanode side of the DSSC. The ZnO layers were annealed at different temperatures under various gas sources. Indeed, the forming gas (FG) (N2/H2 95:5) was found to enhance the conductivity by a factor of 103 compared to nitrogen (N2) or oxygen (O2) annealing gas. The NR width varied between 40 and 100 nm and the length from 500 to 1000 nm, depending on the growth time. The obtained NWs had a length of 850 nm. The properties of the developed ZnO NW and NR layers with different thicknesses and their effect on the photovoltaic parameters were studied. An internal coverage of the ZnO NWs was also applied by the deposition of a thin TiO2 layer by reactive sputtering to improve the cell performance. The application of this layer increased the overall short circuit current J sc by seven times from 2.45 × 10−3 mA/cm2 to 1.70 × 10−2 mA /cm2.

Fabrication of Core-Shell Structured TiO2/MgO Electrodes for Dye-Sensitized Solar Cells

2015 ◽  
Vol 787 ◽  
pp. 3-7 ◽  
Author(s):  
S. Karuppuchamy ◽  
C. Brundha
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Open Circuit ◽  
Core Shell ◽  
Dye Sensitized ◽  
The Core ◽  
Sensitized Solar Cells

We demonstrated the construction and performance of dye-sensitized solar cells (DSCs) based on nanoparticles of TiO2coated with thin shells of MgO by simple solution growth technique. The XRD patterns confirm the presence of both TiO2and MgO in the core-shell structure. The effect of varied shell thickness on the photovoltaic performance of the core-shell structured electrode is also investigated. We found that MgO shells of all thicknesses perform as barriers that improve open-circuit voltage (Voc) of the DSCs only at the expense of a larger decrease in short-circuit current density (Jsc). The energy conversion efficiency was greatly dependent on the thickness of MgO on TiO2film, and the highest efficiency of 4.1% was achieved at the optimum MgO shell layer.

scholarly journals Model Dye-Sensitized Solar Cell dan Aplikasinya Berdasarkan Data Temperatur Harian: Studi Kasus Pangkalpinang

2021 ◽  
Vol 6 (2) ◽  
Author(s):  
Aliefia Noor ◽  
Meri Hamdini ◽  
Salsabila Ramadina ◽  
Yuant Tiandho
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Open Circuit ◽  
Effect Of Temperature ◽  
Synthesis Process ◽  
Dye Sensitized ◽  
Proposed Model ◽  
Sensitized Solar Cells

<p>Dye-Sensitized Solar Cells (DSSC) is photovoltaic with a dye that functions as an acceptor of sunlight. The great potential of using DSSC lies in the ease of the synthesis process, and the dyes used can come from plants. However, like most other solar cells, increasing the operating temperature can degrade the DSSC performance and thus decrease the efficiency. This article presents a model of the relationship between the effect of temperature on DSSC performance. The model proposed is derived from the DSSC equivalence with a diode circuit. By confirming the experimental research results, it is known that the model presented in this study has excellent accuracy on various DSSC performance parameters (R2&gt; 0.99). The performance studied includes the I-V curve's shape, the value of the short-circuit current, the diode leakage current, and the open-circuit voltage. Based on daily temperature data in Pangkalpinang City, the potential performance of the DSSC could also be determined when it was developed in Kep. Bangka Belitung. The short-circuit current value obtained is in the range of 14 A with a voltage of 0.6 V. It is hoped that this proposed model can be information for the development of DSSC because of its enormous potential application in Indonesia.</p>

Sign in / Sign up

Export Citation Format

Share Document