(Invited) Novel Processing for Si-Nanocrystal Based Photonic Materials

2019 ◽  
Vol 28 (3) ◽  
pp. 3-13
Author(s):  
Matthew P. Halsall ◽  
Iain Forbes Crowe ◽  
Nicholas Hylton ◽  
Oksana Hulko ◽  
Andrew Knights ◽  
...  
2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jie Liu ◽  
Wenzhe Liu ◽  
Bo Guan ◽  
Bo Wang ◽  
Lei Shi ◽  
...  

AbstractIn a narrow temperature window in going from the isotropic to highly chiral orders, cholesteric liquid crystals exhibit so-called blue phases, consisting of different morphologies of long, space-filling double twisted cylinders. Those of cubic spatial symmetry have attracted considerable attention in recent years as templates for soft photonic materials. The latter often requires the creation of monodomains of predefined orientation and size, but their engineering is complicated by a lack of comprehensive understanding of how blue phases nucleate and transform into each other at a submicrometer length scale. In this work, we accomplish this by intercepting nucleation processes at intermediate stages with fast cross-linking of a stabilizing polymer matrix. We reveal using transmission electron microscopy, synchrotron small-angle X-ray diffraction, and angle-resolved microspectroscopy that the grid of double-twisted cylinders undergoes highly coordinated, diffusionless transformations. In light of our findings, the implementation of several applications is discussed, such as temperature-switchable QR codes, micro-area lasing, and fabrication of blue phase liquid crystals with large domain sizes.


2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Peter J. Wellmann

AbstractThroughout human history, most further developments or new achievements were accompanied by new materials or new processes that enabled the technologic progress. With concrete devices and applications in mind, synthesis and subsequent treatment of materials naturally went along with the progress. The aim of the underlying article is to spot the role of optimization, of discovery, of trial-and-error approaches, of fundamentals and curiosity driven design and development. In a consecutive examination, five missions addressing the challenges facing our world (identified by the European Council) will be cross linked with seven topical areas from materials science defined by the European Materials Research Society. The scope of this examination is to identify approaches and methods to further develop and innovate materials which form the basis of the anticipated solutions.


Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1022
Author(s):  
Rashid G. Bikbaev ◽  
Ivan V. Timofeev ◽  
Vasiliy F. Shabanov

Optical sensing is one of many promising applications for all-dielectric photonic materials. Herein, we present an analytical and numerical study on the strain-responsive spectral properties of a bioinspired sensor. The sensor structure contains a two-dimensional periodic array of dielectric nanodisks to mimic the optical behavior of grana lamellae inside chloroplasts. To accumulate a noticeable response, we exploit the collective optical mode in grana ensemble. In higher plants, such a mode appears as Wood’s anomaly near the chlorophyll absorption line to control the photosynthesis rate. The resonance is shown persistent against moderate biological disorder and deformation. Under the stretching or compression of a symmetric structure, the mode splits into a couple of polarized modes. The frequency difference is accurately detected. It depends on the stretch coefficient almost linearly providing easy calibration of the strain-sensing device. The sensitivity of the considered structure remains at 5 nm/% in a wide range of strain. The influence of the stretching coefficient on the length of the reciprocal lattice vectors, as well as on the angle between them, is taken into account. This adaptive phenomenon is suggested for sensing applications in biomimetic optical nanomaterials.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiyu Sun ◽  
Wei Wu ◽  
Limei Tian ◽  
Wei Li ◽  
Fang Zhang ◽  
...  

AbstractNot only does the Dynastes tityus beetle display a reversible color change controlled by differences in humidity, but also, the elytron scale can change color from yellow-green to deep-brown in specified shapes. The results obtained by focused ion beam-scanning electron microscopy (FIB-SEM), show that the epicuticle (EPI) is a permeable layer, and the exocuticle (EXO) is a three-dimensional photonic crystal. To investigate the mechanism of the reversible color change, experiments were conducted to determine the water contact angle, surface chemical composition, and optical reflectance, and the reflective spectrum was simulated. The water on the surface began to permeate into the elytron via the surface elemental composition and channels in the EPI. A structural unit (SU) in the EXO allows local color changes in varied shapes. The reflectance of both yellow-green and deep-brown elytra increases as the incidence angle increases from 0° to 60°. The microstructure and changes in the refractive index are the main factors that influence the process of reversible color change. According to the simulation, the lower reflectance causing the color change to deep-brown results from water infiltration, which increases light absorption. Meanwhile, the waxy layer has no effect on the reflection of light. This study lays the foundation to manufacture engineered photonic materials that undergo controllable changes in iridescent color.


2021 ◽  
Vol 127 (2) ◽  
Author(s):  
J. R. Chen ◽  
D. C. Wang ◽  
D. S. Ren ◽  
M. Lu ◽  
M. J. Peng

1992 ◽  
Vol 287 ◽  
Author(s):  
R. V. Raman ◽  
S. V. Rele

ABSTRACTCurrent hot isostatic consolidation methodology used for the fabrication of complex-shaped Si3N4-based components requires the use of an expensive glass encapsulation technique and extended thermal exposure (in hours) of the specimen. An alternative consolidation approach involving the use of solid pressure transmitting media under high pressure, has enabled the consolidation of Si3N4 alloys without the need for glass encapsulation.Characterization of microstructures and mechanical properties of this (MOR, fracture toughness) material has been carried out and will be presented. It has been noted that in Si 3N4/8%Y2O3-4%Al2O3 composition, consolidated using this approach, a significantly larger volume fraction of α phase has been retained compared with typically observed conversion in α⇒ β in hot isostatically pressed material or sintered material.Key issues for addressing densification and microstructure control using this process are presented. This rapid consolidation approach appears to be a promising alternative to hot isostatic pressing for the fabrication of complex-shaped Si3N4 components.


Sign in / Sign up

Export Citation Format

Share Document