Surface Damage on GaAs Induced by Reactive Ion Etching and Sputter Etching

1986 ◽  
Vol 133 (4) ◽  
pp. 784-787 ◽  
Author(s):  
S. W. Pang
Keyword(s):  
Reactive Ion Etching ◽  
Surface Damage ◽  
Ion Etching ◽  
Sputter Etching

Reactive Ion Etching Induced Surface Damage of Silicon Carbide

2005 ◽  
Vol 483-485 ◽  
pp. 765-768 ◽  
Author(s):  
Jun Hai Xia ◽  
E. Rusli ◽  
R. Gopalakrishnan ◽  
S.F. Choy ◽  
Chin Che Tin ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Reactive Ion Etching ◽  
Surface Damage ◽  
Textured Surface ◽  
Rf Power ◽  
Power Devices ◽  
Ion Etching ◽  
Maximum Value ◽  
Wide Range ◽  
Coarse Surface

Reactive ion etching of SiC induced surface damage, e.g., micromasking effect induced coarse and textured surface, is one of the main concerns in the fabrication of SiC based power devices [1]. Based on CHF3 + O2 plasma, 4H-SiC was etched under a wide range of RF power. Extreme coarse and textured etched surfaces were observed under certain etching conditions. A super-linear relationship was found between the surface roughness and RF power when the latter was varied from 40 to 160 W. A further increase in the RF power to 200 W caused the surface roughness to drop abruptly from its maximum value of 182.4 nm to its minimum value of 1.3 nm. Auger electron spectroscopy (AES) results revealed that besides the Al micromasking effect, the carbon residue that formed a carbon-rich layer, could also play a significant role in affecting the surface roughness. Based on the AES results, an alternative explanation on the origin of the coarse surface is proposed.

Low Damage Magnetron Reactive Ion Etching of GaAs

1991 ◽  
Vol 240 ◽  
Author(s):  
G. Mclane ◽  
M. Meyyappan ◽  
M. W. Cole ◽  
H. S. Lee ◽  
R. Lareau ◽  
...  
Keyword(s):  
Minimal Surface ◽  
Reactive Ion Etching ◽  
Surface Region ◽  
Surface Damage ◽  
Silicon Tetrachloride ◽  
Attractive Alternative ◽  
Ion Etching

ABSTRACTMagnetron reactive ion etching is an attractive alternative to reactive ion etching since it has the potential for producing minimal surface damage while still retaining the advantages of reactive ion etching. We report here the results of a study of GaAs magnetron ion etching using Freon-12 and silicon tetrachloride etch gases. Differences are found in etch profiles and surface region characteristics of GaAs samples etched by the two gases. The relevant mechanisms are discussed.

scholarly journals A Comparative Study on the Effects of Passivation Methods on the Carrier Lifetime of RIE and MACE Silicon Micropillars

2019 ◽  
Vol 9 (9) ◽  
pp. 1804
Author(s):  
Amal Kabalan
Keyword(s):  
Comparative Study ◽  
Surface Treatment ◽  
Chemical Etching ◽  
Carrier Lifetime ◽  
Surface Passivation ◽  
Reactive Ion Etching ◽  
Surface Damage ◽  
Ion Etching ◽  
Metal Assisted Chemical Etching

Silicon micropillars have been suggested as one of the techniques for improving the efficiency of devices. Fabrication of micropillars has been done in several ways—Metal Assisted Chemical Etching (MACE) and Reactive Ion Etching (RIE) being the most popular techniques. These techniques include etching through the surface which results in surface damage that affects the carrier lifetime. This paper presents a study that compares the carrier lifetime of micropillars fabricated using RIE and MACE methods. It also looks at increasing carrier lifetime by surface treatment using three main approaches: surface passivation by depositing Al2O3, surface passivation by depositing SiO2/SiN, and surface passivation by etching using KOH and Hydrofluoric Nitric Acetic (HNA) solution. It was concluded that passivating with SiO2 and SiN results in the highest carrier lifetime on the MACE and RIE pillars.

Mechanism of Dry Etching of Silicon Dioxide: a Case of Direct Reactive Ion Etching

1984 ◽  
Vol 38 ◽  
Author(s):  
Ch. Steinbruchel ◽  
H. W. Lehmann ◽  
K. Frick
Keyword(s):  
Ion Beam ◽  
Reactive Ion Etching ◽  
Plasma Chemistry ◽  
Experimental Conditions ◽  
Ion Etching ◽  
Ion Density ◽  
Ion Beam Etching ◽  
Plasma Species ◽  
Parallel Plate Reactor ◽  
Sputter Etching

AbstractReactive sputter etching of SiO2 with CHF3-O2 plasmas has been investigated in a parallel plate reactor by combining etch rate measurements with concurrent determination of ion densities (using a Langmuir probe) and the composition of neutral plasma species (using a mass spectrometer). Etch rates are found to follow the ion density and to be fairly independent of the plasma chemistry under most experimental conditions. Moreover, a comparison of reactive sputter etching and reactive ion beam etching of SiO2 with CHF3 and CF4 shows that etch yields per incoming ion are essentially independent of the flux of neutral radicals to the substrate. This strongly suggests as the dominant etch mechanism for SiO2 direct reactive ion etching, where ions themselves are the main reactants in the etch reaction. Measured values of etch yields are consistent with this picture.

Enhanced etching of InP by cycling with sputter etching and reactive ion etching

1991 ◽  
Author(s):  
Alexandros T. Demos ◽  
H. S. Fogler ◽  
Stella W. Pang ◽  
Michael E. Elta
Keyword(s):  
Reactive Ion Etching ◽  
Ion Etching ◽  
Sputter Etching

Magnetron enhanced reactive ion etching of GaAs in CH4/H2/Ar: Surface damage study

1994 ◽  
Vol 12 (4) ◽  
pp. 1356-1359 ◽  
Author(s):  
G. F. McLane ◽  
W. R. Buchwald ◽  
L. Casas ◽  
M. W. Cole
Keyword(s):  
Reactive Ion Etching ◽  
Surface Damage ◽  
Ion Etching ◽  
Damage Study
Sign in / Sign up

Export Citation Format

Share Document