The Buried Oxide Properties in Oxygen Plasma-Enhanced Low-Temperature Wafer Bonding

2000 ◽  
Vol 147 (7) ◽  
pp. 2754 ◽  
Author(s):  
Y. H. Wu ◽  
C. H. Huang ◽  
W. J. Chen ◽  
C. N. Lin ◽  
Albert Chin
2006 ◽  
Vol 153 (12) ◽  
pp. G1099 ◽  
Author(s):  
Xuanxiong Zhang ◽  
Benoit Olbrechts ◽  
Jean-Pierre Raskin

2016 ◽  
Vol 75 (9) ◽  
pp. 345-353 ◽  
Author(s):  
F. Kurz ◽  
T. Plach ◽  
J. Suss ◽  
T. Wagenleitner ◽  
D. Zinner ◽  
...  

2000 ◽  
Vol 36 (7) ◽  
pp. 677 ◽  
Author(s):  
M. Alexe ◽  
V. Dragoi ◽  
M. Reiche ◽  
U. Gösele

1991 ◽  
Vol 235 ◽  
Author(s):  
K. T. Sung ◽  
S. W. Pang

ABSTRACTSilicon was oxidized at low temperature with an oxygen plasma generated by an electron cyclotron resonance (ECR) source. The ECR source utilized a multicusp magnetic field formed by permanent magnets. Microwave power at 2.45 GHz was applied to the source and if power at 13.56 MHz was applied to the sample stage. Si oxidation was studied as a function of source distance, pressure, microwave power, and rf power. The oxide thickness increases with microwave and rf power but decreases with source distance. The oxidation rate increases with pressure up to 12 mTorr, men decreases at higher pressure. The relative emission intensities in the plasma monitored using optical emission spectroscopy showed similar dependence on the source distance and microwave power. Oxidation temperature was estimated to be <100°C. Using ellipsometry and X-ray photoelectron spectroscopy, the oxidized films were found to be close to that of thermal oxide with refractive index at 1.45 and oxygen to silicon ratio of 2. From the current-voltage and capacitance-voltage measurements, the breakdown fields of these oxide films were 6.3 MV/cm and the fixed charge densities were 7×1010 cm−2.


2015 ◽  
Vol 107 (26) ◽  
pp. 261107 ◽  
Author(s):  
Zihao Wang ◽  
Ruizhe Yao ◽  
Stefan F. Preble ◽  
Chi-Sen Lee ◽  
Luke F. Lester ◽  
...  

2019 ◽  
Vol 16 (8) ◽  
pp. 499-506 ◽  
Author(s):  
Martin Rabold ◽  
Holger Kuster ◽  
Peter Woias ◽  
Frank Goldschmidtboeing

1997 ◽  
Vol 36 (Part 2, No. 5A) ◽  
pp. L527-L528 ◽  
Author(s):  
Robert W. Bower ◽  
Frank Y.-J. Chin

Author(s):  
J. Wei ◽  
S. S. Deng ◽  
C. M. Tan

Silicon-to-silicon wafer bonding by sol-gel intermediate layer has been performed using acid-catalyzed tetraethylthosilicate-ethanol-water sol solution. High bond strength near to the fracture strength of bulk silicon is obtained at low temperature, for example 100°C. However, The bond efficiency and bond strength of this intermediate layer bonding sharply decrease when the bonding temperature increases to elevated temperature, such as 300 °C. The degradation of bond quality is found to be related to the decomposition of residual organic species at elevated bonding temperature. The bubble generation and the mechanism of the high bond strength at low temperature are exploited.


Sign in / Sign up

Export Citation Format

Share Document