pH influence on selectivity and retention of heavy metals in some clay soils

1993 ◽  
Vol 30 (5) ◽  
pp. 821-833 ◽  
Author(s):  
Raymond N. Yong ◽  
Yuwaree Phadungchewit
Keyword(s):  
Heavy Metals ◽  
Soil Solution ◽  
Single Species ◽  
Retention Mechanism ◽  
Clay Soils ◽  
Individual Species ◽  
Solution Ph ◽  
Metal Retention ◽  
Ph Values ◽  
Retention Characteristics

The problem of varying species of heavy metals existing as individual species or in combination with each other in simulated contaminant leachates (solutions) is studied in relation to selectivity and retention in four different kinds of soil. The influence of pH on the retention characteristics is also examined. The results obtained from the heavy metals single-species and composite-species adsorption tests indicate that in evaluating the attenuation potential of the soil substrate (i.e., contaminant attenuation), account needs to be given to the sensitivity of the soil – heavy metals contaminant system to the pH of the leachate and the competitive effect between the heavy metals present in the leachate. A change in the soil solution pH results in a corresponding change of the dominant retention mechanism of heavy metals in the soils. At high pH values, precipitation mechanisms (e.g., precipitating as hydroxides and (or) as carbonates) dominate. As pH decreases, precipitation becomes less important, and cation exchange becomes dominant. High amounts of heavy metals are retained in the soils if the soil buffer capacity remains high enough to resist a change in pH. The selectivity order of heavy-metal retention in soils depends on the pH of soil solution. At soil solution pH values above 4 or 5, when precipitation prevails, the selectivity order obtained is given as Pb > Cu > Zn ≥ Cd, as demonstrated for the illite, montmorillonite, and natural clay soils. At lower soil solution pH values, the selectivity order obtained is given as Pb > Cd > Zn > Cu, as can be seen in the case of kaolinite and montmorillonite. Key words : heavy metals, retention, selectivity, preferential adsorption, precipitation.

Selective sequential extraction analysis of heavy-metal retention in soil

1993 ◽  
Vol 30 (5) ◽  
pp. 834-847 ◽  
Author(s):  
Raymond N. Yong ◽  
Rosa Galvez-Cloutier ◽  
Yuwaree Phadungchewit
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Sequential Extraction ◽  
Soil Solution ◽  
Solution Ph ◽  
Selective Sequential Extraction ◽  
Metal Retention ◽  
Ph Values ◽  
Sequential Extraction Method ◽  
Sequential Extraction Analysis

The selective sequential extraction method of analysis is used in this study to determine the distribution of heavy metals in some clay soils, to assist in evaluation of the role of the various clay soil solids (clay minerals, organics, amorphous materials, and carbonates) in heavy-metal retention capability as a function of acidity of the leachate. The chemical speciation model MINTEQ (metal speciation equilibrium model for surface and groundwater) is used to calculate the probable percent distribution of different species of heavy metals present in the leachate used. The selective sequential extraction method is based on the fact that different forms of heavy metals that are retained in soil (e.g., as oxides, hydroxides, carbonates, bound with organic matter) can be extracted selectively by using appropriate reagents. The results show that heavy metals can be retained in the four clay soils studied by several soil phases or mechanisms such as exchangeable, carbonate, hydroxide, and organic phases. The retention of heavy metals in any phase depends on soil solution pH, soil constituents, and the type of heavy metal. At high soil solution pH values, retention of heavy metal by precipitation mechanisms prevails, whereas at low soil solution pH, retention by cation exchange mechanisms becomes dominant. The results from the selective sequential extraction analysis support the conclusion of the significance of soil buffer capacity with regard to heavy-metal retention. The capacity of the soils to retain high amounts of heavy metals as they receive increasing amounts of acid (i.e., as the pH is reduced) depends directly on the soil initial pH values and on their buffer capacities. Key words : selective sequential analysis, exchangeable cations, heavy metals, equilibrium models, oxides.

scholarly journals Theoretical Modelling of Immobilization of Cadmium and Nickel in Soil Using Iron Nanoparticles

2017 ◽  
Vol 9 (4) ◽  
pp. 381-386
Author(s):  
Vaidotas Danila ◽  
Saulius Vasarevičius
Keyword(s):  
Heavy Metals ◽  
Soil Solution ◽  
Metal Ion ◽  
Iron Nanoparticles ◽  
Theoretical Modelling ◽  
Solution Ph ◽  
Soil Solutions ◽  
Insoluble Compounds ◽  
Zero Valent Iron Nanoparticles ◽  
Complexation Reactions

Immobilization using zero valent using iron nanoparticles is a soil remediation technology that reduces concentrations of dissolved contaminants in soil solution. Immobilization of heavy metals in soil can be achieved through heavy metals adsorption and surface complexation reactions. These processes result in adsorption of heavy metals from solution phase and thus reducing their mobility in soil. Theoretical modelling of heavy metals, namely, cadmium and nickel, adsorption using zero valent iron nanoparticles was conducted using Visual MINTEQ. Adsorption of cadmium and nickel from soil solutions were modelled separately and when these metals were dissolved together. Results have showed that iron nanoparticles can be successfully applied as an effective adsorbent for cadmium and nickel removal from soil solution by producing insoluble compounds. After conducting the modelling of dependences of Cd+2 and Ni+2 ions adsorption on soil solution pH using iron nanoparticles, it was found that increasing pH of solution results in the increase of these ions adsorption. Adsorption of cadmium reached approximately 100% when pH ≥ 8.0, and adsorption of nickel reached approximately 100% when pH ≥ 7.0. During the modelling, it was found that adsorption of heavy metals Cd and Ni mostly occur, when one heavy metal ion is chemically adsorbed on two sorption sites. During the adsorption modelling, when Cd+2 and Ni+2 ions were dissolved together in acidic phase, it was found that adsorption is slightly lower than modelling adsorption of these metals separately. It was influenced by the competition of Cd+2 and Ni+2 ions for sorption sites on the surface of iron nanoparticles.

Applications of Bentonite to Soil Decontamination

2018 ◽  
Vol 69 (7) ◽  
pp. 1695-1698
Author(s):  
Marin Rusanescu ◽  
Carmen Otilia Rusanescu ◽  
Gheorghe Voicu ◽  
Mihaela Begea
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Laboratory Experiments ◽  
Experimental Studies ◽  
Heavy Metal Concentration ◽  
Polluted Soil ◽  
Raw Material ◽  
Soil Decontamination ◽  
Metal Retention ◽  
Removal Of Heavy Metals

A calcium bentonite from Orasu Nou deposit (Satu Mare Romania) was used as raw material. We have conducted laboratory experiments to determine the influence of bentonite on the degree of heavy metal retention. It has been observed that the rate of retention increases as the heavy metal concentration decreases. Experimental studies have been carried out on metal retention ( Zn) in bentonite. In this paper, we realized laboratory experiments for determining the influence of metal (Zn) on the growth and development of two types of plants (Pelargonium domesticum and Kalanchoe) and the effect of bentonite on the absorption of pollutants. These flowers were planted in unpolluted soil, in heavy metal polluted soil and in heavy metal polluted soil to which bentonite was added to observe the positive effect of bentonite. It has been noticed that the flowers planted in unpolluted soil and polluted with heavy metals to which bentonite has been added, the flowers have flourished, the leaves are still green and the plants whose soils have been polluted with heavy metals began to dry after 6 days, three weeks have yellowish leaves and flowers have dried. Experiments have demonstrated the essential role of bentonite for the removal of heavy metals polluted soil.

Mercury Removal from Wastewater by Steamed Hoof Powder

1999 ◽  
Vol 40 (7) ◽  
pp. 109-116 ◽  
Author(s):  
M. H. Ansari ◽  
A. M. Deshkar ◽  
P. S. Kelkar ◽  
D. M. Dharmadhikari ◽  
M. Z. Hasan ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Light Metal ◽  
Mercury Removal ◽  
High Adsorption ◽  
Surface Sites ◽  
Ph Values ◽  
High Adsorption Capacity

Steamed Hoof Powder (SHP), size < 53μ, was observed to have high adsorption capacity for Hg(II) with >95% removal from a solution containing 100 mg/L of Hg(II) with only 0.1% (W/V) concentration of SHP. The SHP has good settling properties and gives clear and odour free effluent. Studies indicate that pH values between 2 and 10 have no effect on the adsorption of Hg(II) on SHP. Light metal ions like Na+, K+, Ca2+ and Mg2+ up to concentrations of 500 mg/L and heavy metals like Cu2+, Zn2+, Cd2+, Co2+, Pb2+, Ni2+, Mn2+, Cr3+, Cr6+, Fe2+ and Fe3+ up to concentrations of 100 mg/L do not interfere with the adsorption process. Anions like sulphate, acetate and phosphate up to concentrations of 200 mg/L do not interfere. Chloride interferes in the adsorption process when Hg(II) concentration is above 9.7 mg/L. The adsorption equilibrium was established within two hours. Studies indicate that adsorption occurs on the surface sites of the adsorbent.

scholarly journals Exploiting the Potential in Water Cleanup from Metals and Nutrients of Desmodesmus sp. and Ampelodesmos mauritanicus

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1461
Author(s):  
Roberto Braglia ◽  
Lorenza Rugnini ◽  
Sara Malizia ◽  
Francesco Scuderi ◽  
Enrico Luigi Redi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Cost Effective ◽  
Single Species ◽  
Nitrogen And Phosphorus ◽  
Removal Rates ◽  
Sequential Approach ◽  
Removal Capacity ◽  
Green Microalga

Increasing levels of freshwater contaminants, mainly due to anthropogenic activities, have resulted in a great deal of interest in finding new eco-friendly, cost-effective and efficient methods for remediating polluted waters. The aim of this work was to assess the feasibility of using a green microalga Desmodesmus sp., a cyanobacterium Nostoc sp. and a hemicryptophyte Ampelodesmos mauritanicus to bioremediate a water polluted with an excess of nutrients (nitrogen and phosphorus) and heavy metals (copper and nickel). We immediately determined that Nostoc sp. was sensitive to metal toxicity, and thus Desmodesmus sp. was chosen for sequential tests with A. mauritanicus. First, A. mauritanicus plants were grown in the ‘polluted’ culture medium for seven days and were, then, substituted by Desmodesmus sp. for a further seven days (14 days in total). Heavy metals were shown to negatively affect both the growth rates and nutrient removal capacity. The sequential approach resulted in high metal removal rates in the single metal solutions up to 74% for Cu and 85% for Ni, while, in the bi-metal solutions, the removal rates were lower and showed a bias for Cu uptake. Single species controls showed better outcomes; however, further studies are necessary to investigate the behavior of new species.

scholarly journals Remaining phosphorus and sodium fluoride pH in soils with different clay contents and clay mineralogies

2004 ◽  
Vol 39 (3) ◽  
pp. 241-246 ◽  
Author(s):  
Marcelo Eduardo Alves ◽  
Arquimedes Lavorenti
Keyword(s):  
Buffer Capacity ◽  
Ammonium Oxalate ◽  
Clay Mineralogy ◽  
Clay Content ◽  
Response Curves ◽  
Solution Ph ◽  
Ph Values ◽  
Soil Clay ◽  
Soil Clay Content ◽  
Discriminatory Capacity

The remaining phosphorus (Prem) has been used for estimating the phosphorus buffer capacity (PBC) of soils of some Brazilian regions. Furthermore, the remaining phosphorus can also be used for estimating P, S and Zn soil critical levels determined with PBC-sensible extractants and for defining P and S levels to be used not only in P and S adsorption studies but also for the establishment of P and S response curves. The objective of this work was to evaluate the effects of soil clay content and clay mineralogy on Prem and its relationship with pH values measured in saturated NaF solution (pH NaF). Ammonium-oxalate-extractable aluminum exerts the major impacts on both Prem and pH NaF, which, in turn, are less dependent on soil clay content. Although Prem and pH NaF have consistent correlation, the former has a soil-PBC discriminatory capacity much greater than pH NaF.

scholarly journals Optimization of process parameters for heavy metals biosorption onto mustard waste biomass

2016 ◽  
Vol 14 (1) ◽  
pp. 175-187 ◽  
Author(s):  
Lăcrămioara (Negrilă) Nemeş ◽  
Laura Bulgariu
Keyword(s):  
Heavy Metals ◽  
Aqueous Media ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Solution Ph ◽  
Biosorption Process ◽  
Optimization Of Process Parameters ◽  
Removal Of Heavy Metals ◽  
Equilibrium Data ◽  
Order Kinetic Model

AbstractMustard waste biomass was tested as a biosorbent for the removal of Pb(II), Zn(II) and Cd(II) from aqueous solution. This strategy may be a sustainable option for the utilization of such wastes. The influence of the most important operating parameters of the biosorption process was analyzed in batch experiments, and optimal conditions were found to include initial solution pH 5.5, 5.0 g biosorbent/L, 2 hours of contact time and high temperature. Kinetics analyses show that the maximum of biosorption was quickly reached and could be described by a pseudo-second order kinetic model. The equilibrium data were well fitted by the Langmuir model, and the highest values of maximum biosorption capacity were obtained with Pb(II), followed by Zn(II) and Cd(II). The thermodynamic parameters of the biosorption process (ΔG, ΔH and ΔS) were also evaluated from isotherms. The results of this study suggest that mustard waste biomass can be used for the removal of heavy metals from aqueous media.

scholarly journals Adsorption of Heavy Metals on Soil Collected from Lixisol of Typical Karst Areas in the Presence of CaCO3 and Soil Clay and Their Competition Behavior

2020 ◽  
Vol 12 (18) ◽  
pp. 7315
Author(s):  
Guandi He ◽  
Zhenming Zhang ◽  
Xianliang Wu ◽  
Mingyang Cui ◽  
Jiachun Zhang ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Soil Sample ◽  
Soil Ph ◽  
Clay Content ◽  
Guizhou Province ◽  
Metal Exposure ◽  
Risk Area ◽  
High Risk Area ◽  
Ph Values ◽  
Pseudo Second Order

The content of heavy metals in the soil in Guizhou Province, which is a high-risk area for heavy metal exposure, is significantly higher than that in other areas in China. Therefore, the objective of this study was to evaluate the ability of CaCO3 and clay to accumulate heavy metals in topsoil sample collected from Lixisol using the method of indoor simulation. The results showed that the contents of Cu, Zn, Cd, Cr, Pb, Hg and As in the soil sample were 10.8 mg/kg, 125 mg/kg, 0.489 mg/kg, 23.5 mg/kg, 22.7 mg/kg, 58.3 mg/kg and 45.4 mg/kg, respectively. The soil pH values increased with the CaCO3 concentration in the soil, and the fluctuation of the soil pH values was weak after the CaCO3 concentrations reached 100 g/kg. The adsorption capacity of lime soil increased by approximately 10 mg/kg on average, and the desorption capacity decreased by approximately 300 mg/kg on average. The desorption of all heavy metals in this study did not change with increasing clay content. Pseudo-second-order kinetics were more suitable for describing the adsorption kinetics of heavy metals on the soil material, as evidenced by the higher R2 value. The Freundlich model can better describe the adsorption process of As on lime soil. The process of As, Cr, Cd and Hg adsorption on the soil sample was spontaneous and entropy-driven. Additionally, the process of Cu and Pb adsorption on the soil materials was spontaneous and enthalpy-driven. Generally, the adsorption and desorption of heavy metals in polluted soil increased and decreased, respectively, with increasing CaCO3 content. The effect of calcium carbonate on the accumulation of heavy metals in soil was greater than that of clay. In summary, CaCO3 and pH values in soil can be appropriately added in several areas polluted by heavy metals to enhance the crop yield and reduce the adsorption of heavy metals in soils.

scholarly journals Study on Adsorption of Cu and Ba from Aqueous Solutions Using Nanoparticles of Origanum (OR) and Lavandula (LV)

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Ghadah M. Al-Senani ◽  
Foziah F. Al-Fawzan
Keyword(s):  
Heavy Metals ◽  
Particle Size ◽  
Free Energy ◽  
Aqueous Solutions ◽  
Thermodynamic Parameters ◽  
Solution Ph ◽  
Environment Friendly ◽  
Removal Of Heavy Metals ◽  
Equilibrium Data ◽  
Langmuir And Freundlich Models

Wild herbs (Origanum (OR) and Lavandula (LV)) were used as environment-friendly adsorbents in this study. The adsorbents were used for adsorption of Cu and Ba from water. The adsorption of heavy metals onto OR and LV was dependent on particle size, dose, and solution pH. The diameter of adsorbent particles was less than 282.8 nm. The adsorption follows second-order kinetics. Langmuir and Freundlich models have been applied to describe the equilibrium data, and the thermodynamic parameters, the Gibbs free energy, ∆G°, enthalpy, ∆H°, and entropy, ∆S°, have been determined. The positive value of ∆H° suggests that the adsorption of heavy metals by the wild herbs is endothermic. The negative values of ∆G° at all the studied temperatures indicate that the adsorption is a spontaneous process. It can be concluded that OR and LV are promising adsorbents for the removal of heavy metals from aqueous solutions over a range of concentrations.

scholarly journals Study of photocatalytic activity of TiO2 fluorinated by thermal shock method for the degradation of different dyes

2015 ◽  
Vol 18 (2) ◽  
pp. 121-131
Author(s):  
Khoa Tien Le ◽  
Ngoc Chau Hoang ◽  
Tien Thuy Thai ◽  
Anh Trung Le ◽  
Thinh Nguyen Huu Pham ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Thermal Shock ◽  
Photocatalytic Oxidation ◽  
Organic Dyes ◽  
Cationic Dye ◽  
Solution Ph ◽  
Ph Values ◽  
Methylene Blue Cationic Dye

TiO2 P25 was fluorinated by thermal shock method in order to study the influence of thermal shock fluorination on the surface properties and the photocatalytic activity for the degradation of cationic and anionic organic dyes at different pH values. The surface charge of catalysts was characterized by the pHPZC measurement. The photocatalytic activity of catalysts was evaluated via the degradation of methylene blue (cationic dye) and methyl orange (anionic dye). The results showed that the thermal shock fluorination and the rise of solution pH can increase the surface negative charge of TiO2, which enhanced the adsorption of methylene blue and then improved the photocatalytic degradation of this cationic dye under UV and visible light. On the other hand, after the fluorination, the adsorption of methyl orange on TiO2 was strongly reduced, which limited the photocatalytic oxidation of this anion dye.

Sign in / Sign up

Export Citation Format

Share Document