scholarly journals Exploiting the Potential in Water Cleanup from Metals and Nutrients of Desmodesmus sp. and Ampelodesmos mauritanicus

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1461
Author(s):  
Roberto Braglia ◽  
Lorenza Rugnini ◽  
Sara Malizia ◽  
Francesco Scuderi ◽  
Enrico Luigi Redi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Cost Effective ◽  
Single Species ◽  
Nitrogen And Phosphorus ◽  
Removal Rates ◽  
Sequential Approach ◽  
Removal Capacity ◽  
Green Microalga

Increasing levels of freshwater contaminants, mainly due to anthropogenic activities, have resulted in a great deal of interest in finding new eco-friendly, cost-effective and efficient methods for remediating polluted waters. The aim of this work was to assess the feasibility of using a green microalga Desmodesmus sp., a cyanobacterium Nostoc sp. and a hemicryptophyte Ampelodesmos mauritanicus to bioremediate a water polluted with an excess of nutrients (nitrogen and phosphorus) and heavy metals (copper and nickel). We immediately determined that Nostoc sp. was sensitive to metal toxicity, and thus Desmodesmus sp. was chosen for sequential tests with A. mauritanicus. First, A. mauritanicus plants were grown in the ‘polluted’ culture medium for seven days and were, then, substituted by Desmodesmus sp. for a further seven days (14 days in total). Heavy metals were shown to negatively affect both the growth rates and nutrient removal capacity. The sequential approach resulted in high metal removal rates in the single metal solutions up to 74% for Cu and 85% for Ni, while, in the bi-metal solutions, the removal rates were lower and showed a bias for Cu uptake. Single species controls showed better outcomes; however, further studies are necessary to investigate the behavior of new species.

Adsorption of Heavy Metals Using γ-PGA Produced by Bacillus pumilus

2018 ◽  
Vol 932 ◽  
pp. 124-128
Author(s):  
Wei Feng Liu ◽  
Xue Wei Li ◽  
Wen Bo Dong ◽  
Le Bo ◽  
Yi Min Zhu ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Exhaust Gas ◽  
Removal Rates ◽  
Gas Cleaning ◽  
Exhaust Gas Cleaning ◽  
Nacl Concentration ◽  
Addition Amount

Poly-γ-glutamic acid (γ-PGA) produced by Bacillus pumilus C2 was employed to remove heavy metals from sewage of magnesium - based exhaust gas cleaning system (Mg-EGCS). The components of heavy metals in the sewage were detailed analyzed. On the base of the analytical results, the effects of addition amount of γ-PGA, adsorption time, temperature and NaCl concentration on the removal efficiency of typical heavy metals were further investigated. The optimal removal rates of heavy metals were obtained at the γ-PGA dosage of 9 g/L and adsorption duration of 30 min. The γ-PGA had excellent tolerance for high temperatures up to 80°C and exhibited steady heavy metal removal efficiency in NaCl concentrations of 0 – 24%. Under the optimal conditions, the removal rates of Zn, Cr, V, Cd, Pb and Ni by γ-PGA in a real sewage of Mg-EGCS achieved 53.6%, 100%, 49.2%, 72.7%, 33.7% and 39.9% respectively.

scholarly journals Biosorption of Heavy Metals by the Bacterial Exopolysaccharide FucoPol

2020 ◽  
Vol 10 (19) ◽  
pp. 6708
Author(s):  
Patrícia Concórdio-Reis ◽  
Maria A. M. Reis ◽  
Filomena Freitas
Keyword(s):  
Heavy Metals ◽  
Binding Sites ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Chemical Methods ◽  
Ph Values ◽  
Bacterial Exopolysaccharide ◽  
Physical And Chemical ◽  
Specific Metal ◽  
Significant Health

Despite the efforts for minimizing the usage of heavy metals, anthropogenic activities still generate high amounts of wastewater containing these contaminants that cause significant health and environmental problems. Given the drawbacks of the conventional physical and chemical methods currently used, natural biosorbents (microbial cells or their products) arise as promising environmentally friendly alternatives. In this study, the binding efficiency of the polysaccharide secreted by Enterobacter A47, FucoPol, towards lead (Pb2+), cobalt (Co2+), copper (Cu2+) and zinc (Zn2+) cations was demonstrated. FucoPol revealed a higher performance for the biosorption of Pb2+, with a maximum overall metal removal of 93.9 ± 5.3% and a specific metal uptake of 41.1 ± 2.3 mg/gEPS, from a Pb2+ solution with an initial concentration of 10 mg/L, by a 5 g/L FucoPol solution. The overall metal removal decreased considerably (≤31.3 ± 1.6%) for higher Pb2+ concentrations (48 and 100 mg/L) probably due to the saturation of FucoPol’s binding sites. Pb2+ removal was also less efficient (66.0 ± 8.2%) when a higher FucoPol concentration (10 g/L) was tested. Pb2+ removal efficiency of FucoPol was maximized at pH 4.3, however, it was affected by lower pH values (2.5–3.3). Moreover, the FucoPol’s sorption performance was unaffected (overall metal removal: 91.6–93.9%) in the temperature range of 5–40 °C. These findings demonstrate FucoPol’s great potential for utilization as a biodegradable and safe biosorbent for treating waters and wastewaters contaminated with Pb2+.

scholarly journals Heavy metal removal from wastewater using various adsorbents: a review

2016 ◽  
Vol 7 (4) ◽  
pp. 387-419 ◽  
Author(s):  
Renu ◽  
Madhu Agarwal ◽  
K. Singh
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aquatic Ecosystems ◽  
Adsorption Process ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Review Article ◽  
Removal Capacity ◽  
Removal Of Heavy Metals

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both commercial adsorbents and bioadsorbents are used for the removal of heavy metals from wastewater, with high removal capacity. This review article aims to compile scattered information on the different adsorbents that are used for heavy metal removal and to provide information on the commercially available and natural bioadsorbents used for removal of chromium, cadmium and copper, in particular.

Potential Evaluation of Gray Clay as Adsorbent of Heavy Metals Zinc (II) and Lead (II)

2014 ◽  
Vol 798-799 ◽  
pp. 622-627
Author(s):  
Wellington Siqueira Lima ◽  
José Vanderley Nascimento Silva ◽  
Aline Cadigna Lima Patrício ◽  
Guilherme Costa Oliveira ◽  
Meiry Glaúcia Freire Rodrigues
Keyword(s):  
Heavy Metals ◽  
Factorial Design ◽  
Metal Removal ◽  
Physical Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Removal Capacity ◽  
Adsorption Of Nitrogen ◽  
Potential Evaluation ◽  
Good Percentage

The problems caused by contamination of heavy metals generate a growing need to implement technologies to reduce or eliminate them. This work aims to evaluate the potential of gray clay, the process of removal of zinc and lead from synthetic effluents in finite bath system. The clay was characterized by: X-ray diffraction, X-ray Spectroscopy Energy Dispersive and Physical Adsorption of Nitrogen. The tests were performed finite bath following a 22 factorial design, with the variables: pH and initial concentrations of metal. The clays were evaluated for their removal capacity and rate of metal removal. After the characterization and evaluation, it was found that the gray clay comprises clay of the groups of kaolinite and mica. The results of the factorial design shown that the adsorption of the metals zinc and lead can be developed with good percentage of removal.

An Overview of Fruit Waste as Sustainable Adsorbent for Heavy Metal Removal

2013 ◽  
Vol 389 ◽  
pp. 29-35 ◽  
Author(s):  
Norzila Othman ◽  
S. Mohd-Asharuddin ◽  
M.F.H. Azizul-Rahman
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Cost Effective ◽  
Good Efficiency ◽  
Recovery Method ◽  
High Metal Content ◽  
Fruit Waste

Biosorption is an environmental friendly method for metal removal as it can be used as a cost effective and efficient technique for heavy metal removal. A lot of biomass can be choosed as biosorbent such as waste material from food processing and agriculture.ent. This paper will review the potential used of local fruit rind as biosorbent for heavy metal removal in wastewater. Heavy metals have been in various industries and resulted to a toxic condition in aquatic ecosystem. Therefore, various techniques have been employed for the treatment of metal-bearing industrial wastewaters including biological treatment through biosorption. Biosorption offers the advantages of low cost, good efficiency and production of sludge with high metal content is possible to avoid by the existence of metal recovery method from metal loaded biosorbent. The successful application of local fruit waste in treating wastewater containing heavy metals requires a deeper understanding of how biosorbent material proceeds.

Removal of Some Heavy Metals by Electrocoagulation

2012 ◽  
Vol 468-471 ◽  
pp. 2882-2890 ◽  
Author(s):  
R. H. Al Anbari ◽  
S. M. Alfatlawi ◽  
J. H. Albaidhani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Removal Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Efficient Treatment ◽  
Electrolytic Cells ◽  
Removal Capacity ◽  
Metals Removal ◽  
Working Parameters

Heavy metal removal by electrocoagulation using iron electrodes material was investigated in this paper. Several working parameters, such as pH, current density and heavy metal ions concentration were studied in an attempt to achieve a higher removal capacity. A simple and efficient treatment process for removal of heavy metals is essentially necessary. The performance of continuous flow electrocoagulation system, with reactor consists of a ladder series of twelve electrolytic cells, each cell containing stainless steel cathode and iron anode. The treatment of synthetic solutions containing Zn 2+,Cu 2+,Ni 2+,Cr 3+,Cd 2+ and Co 2+ ,has been investigated. Results showed that iron is very effective as sacrificial electrode material for heavy metals removal efficiency and cost points. Also it was concluded that the chromium has lower efficient removal as compared to zinc, copper and nickel. At the same time cadmium and cobalt have minimum removal efficiency.

scholarly journals Remediation of Heavy Metals from Soil by Eco Approaches

2019 ◽  
Vol 5 ◽  
pp. 1
Author(s):  
Manish Batham ◽  
Jot Sharma ◽  
◽  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Risk Factor ◽  
Plant Growth ◽  
Anthropogenic Activities ◽  
Cost Effective ◽  
Biodegradable Materials ◽  
The Earth ◽  
Heavy Metal Remediation ◽  
High Level

The contamination of soil by anthropogenic activities is of great concern in recent times. There is an urgent demand of reliable and eco-friendly approaches for remediation of this concern. The current techniques for heavy metal remediation from contaminated soil are costly, time consuming, and harmful for the environment. Toxicity of heavy metals can reduce plant growth, and a high level of presence of these heavy metals is a risk factor to human and plant health. Heavy metals neither biodegradable materials nor are created. They occur naturally in the earth crust, and they reach the environment by human activities. Organic compounds can be degraded, but metals cannot degrade, and therefore effective cleanup requires its immobilization to reduce or remove toxicity. Recently, research focuses on cost-effective technologies to clean polluted areas. Vermiremediation and phytoremediation are two such useful techniques. In these eco-friendly techniques of remediation, the target plants accumulate, volatilize the contaminants, or convert them into some nontoxic forms, thus remediating the soil.

COMPARATIVE STUDY USING RAW AND TREATED CASSAVA AND LEMON RESIDUES IN THE REMOVAL OF NICKEL (II)

Agrociencia ◽  
2021 ◽  
Vol 55 (2) ◽  
pp. 145-158
Author(s):  
Candelaria Tejada Tovar ◽  
Diofanor Acevedo ◽  
Angel Villabona Ortíz ◽  
Nórida Pájaro Gómez ◽  
María Otero
Keyword(s):  
Heavy Metals ◽  
Citric Acid ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Metal Removal ◽  
Anthropogenic Activities ◽  
Citrus Limon ◽  
Manihot Esculenta Crantz ◽  
High Concentrations ◽  
High Level

Increasing pollution of water bodies by heavy metals from different anthropogenic activities, mainly of industrial nature, generates a high level of danger due to accumulation. Within a given time, heavy metals reach high concentrations in living organisms, especially those around sites of discharge. The objective of this research was to evaluate the adsorption capacity of dried lemon (Citrus limon) and cassava (Manihot esculenta Crantz) peels, raw or treated with citric acid, to remove Ni (II) in synthetic aqueous solution with 100 mg L-1 of metal. To assess adaptation and characterize these bio-adsorbents, biomasses were washed with distilled water. They were dried at 90 °C for 24 h and then ground in a mill. The modification of the cassava and lemon peels was carried out with 0.6 M citric acid; followed by adsorption and kinetic tests that were carried out in a discontinuous system. The biomaterials were characterized by chemical, elemental and Fourier transform infrared spectroscopy (FTIR) analysis. We found that both biomasses are composed mostly of carbon and cellulose. The FTIR showed the presence of carboxyl, amino, carbonyl and hydroxyl functional groups, which intervene in the adsorption process. Lemon and cassava peels showed 95.8% adsorption capacity of Ni (II) ions, and 75.69% removal of the contaminants. The best adsorbent particle sizes were 0.5 mm for lemon, and 1 mm for cassava peel, the two biomasses at pH 6. The best fit of the experimental data was Freundlich’s model and the pseudo-second-order model best described adsorption kinetics in the Ni (II) removal process. Treatment of the biomasses with citric acid did not render a significant improvement in metal removal. The best conditions for an efficient adsorption process were achieved using a specific particle size for lemon, 0.5 mm, and 1 mm for cassava residues.

scholarly journals Alkyl Thiourea Functionalised Silica for the Effective Removal of Heavy Metals from Acanthopanax senticosus Extract

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Hong-Li Guo ◽  
Shuo Zhang ◽  
Christopher North ◽  
Min Zhang ◽  
Xiao-xia Meng ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Solid Content ◽  
Removal Rates ◽  
Acanthopanax Senticosus ◽  
Hplc Fingerprint ◽  
Static Adsorption ◽  
Before And After

Acanthopanax senticosus extract with excessive standard of Pb, Cd, Hg, and Cu was used as the research object, and the alkyl thiourea functionalised silica was used as a new heavy metal removal scavenger. The heavy metal removal process was optimised by orthogonal experiment with dynamic and static adsorption modes. Meanwhile, the content of Acanthopanax B and Acanthopanax E, the solid content, and the HPLC fingerprint similarity were used as quality monitoring indicators of Acanthopanax senticosus heavy metal removal before and after. Then, the technical adaptability of heavy metal removal by alkyl thiourea functionalised silica was evaluated. Under the optimal dynamic adsorption conditions, the average removal rates of Pb, Cd, Hg, and Cu were 91.64%, 93.04%, 81.77%, and 83.11%, respectively. Under the optimal static adsorption conditions, the average removal rates of Pb, Cd, Hg, and Cu were 82.22%, 89.95%, 81.26%, and 82.97%, respectively. During Acanthopanax senticosus extract heavy metal removal before and after, the change percentage of Acanthopanax B and Acanthopanax E was less than 2.00%, the solid content loss rate was only 0.18%, and the fingerprint similarity was over 99.9%. The method can be used to satisfy the high efficiency of selective removal of harmful elements in Acanthopanax senticosus extract and the effective composition of almost no effect; the method is simple and easy, so it can be recommended for pretreatment of heavy metals in Traditional Chinese Medicine extracts, and this way provides a new thought and research technique to decrease the contents of heavy metals.

scholarly journals Magnetic Graphene Oxide Composites are the Solutions for Sustainable Remediation of Ecosystems

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Lakshmi Prasanna Koduru
Keyword(s):  
Heavy Metals ◽  
Graphene Oxide ◽  
Membrane Separation ◽  
Anthropogenic Activities ◽  
Low Cost ◽  
Cost Effective ◽  
Hybrid Nanocomposites ◽  
Magnetic Graphene Oxide ◽  
Removal Of Heavy Metals ◽  
Potential Applications

Heavy metals are one of the primary contaminants in the environment [1]. Exposure to heavy metals, even at trace levels, is believed to be a high health risk for humans [2,3]. Heavy metals are naturally occurring throughout the earth’s crust [4]. But most of the environmental contamination results from the anthropogenic activities such as mining and smelting operations, industry, and domestic and agricultural use of metals and metalcontaining compounds. Migration of these contaminants into non-contaminated areas as dust or leachates through the soil and spreading of heavy metals containing sewage sludge are a few examples of events contributing towards contamination of the ecosystems [5]. Hence, water is the one of the major routes through which heavy metals and radionuclides may enter the human body [6,7]. The sources of water pollution are shown in Figure 1. The conventional wastewater purification techniques including chemical coagulation, photo degradation, precipitation, flocculation, activated sludge, membrane separation and ion exchange are limited to the removal of heavy metals at trace levels [7-9]. However, adsorption is one of the best methods for the purification of water, owing to its low cost and easy handling of materials [7,10-12]. Moreover, adsorption approaches using commercial activated carbon, micro-filtration and membrane techniques are effective, but their use is limited by the complicated installation process involved coupled with the high maintenance costs of the systems [7,13]. Hence, these drawbacks have necessitated the search for an alternative method which is inexpensive, renewable and cost-effective for the removal of heavy metals from aqueous solutions. Many scientific groups have prepared graphene or graphene oxide (GO) based hybrid nanocomposites for various potential applications [14-17]. The study of literature survey and stability of the GO-based nanocomposites prompted us to survey on graphene oxide and reduced graphene oxide-based inverse spinel nickel ferrite nanocomposites for the removal of heavy metals and radionuclides from water with the purpose of reducing their environmental impact

Sign in / Sign up

Export Citation Format

Share Document