Seismic evaluation of single-storey steel buildings

1999 ◽  
Vol 26 (4) ◽  
pp. 379-394 ◽  
Author(s):  
M S Medhekar ◽  
DJL Kennedy
Keyword(s):  
Seismic Performance ◽  
Response Spectrum ◽  
Time History ◽  
Analytical Models ◽  
Steel Buildings ◽  
Concentrically Braced Frames ◽  
Braced Frame ◽  
Seismic Zones ◽  
Concentrically Braced Frame ◽  
Concentrically Braced

The seismic performance of single-storey steel buildings, with concentrically braced frames and a roof diaphragm that acts structurally, is evaluated. The buildings are designed in accordance with the National Building Code of Canada 1995 and CSA Standard S16.1-94 for five seismic zones in western Canada with seismicities ranging from low to high. Only frames designed with a force modification factor of 1.5 are considered. Analytical models of the building are developed, which consider the nonlinear seismic behaviour of the concentrically braced frame, the strength and stiffness contributions of the cladding, and the flexibility, strength, and distributed mass of the roof diaphragm. The seismic response of the models is assessed by means of a linear static analysis, a response spectrum analysis, a nonlinear static or "pushover" analysis, and nonlinear dynamic time history analyses. The results indicate that current design procedures provide a reasonable estimate of the drift and brace ductility demand, but do not ensure that yielding is restricted to the braces. Moreover, in moderate and high seismic zones, the roof diaphragm responds inelastically and brace connections are overloaded. Recommendations are made to improve the seismic performance of such buildings.Key words: analyses, concentrically braced frame, dynamic, earthquake, flexible diaphragm, low-rise, nonlinear, seismic design, steel.

Seismic response of two-storey buildings with concentrically braced steel frames

1999 ◽  
Vol 26 (4) ◽  
pp. 497-509 ◽  
Author(s):  
M S Medhekar ◽  
DJL Kennedy
Keyword(s):  
Seismic Response ◽  
Response Spectrum ◽  
Time History ◽  
Steel Buildings ◽  
Capacity Design ◽  
Concentrically Braced Frames ◽  
Braced Frame ◽  
Seismic Zones ◽  
Concentrically Braced Frame ◽  
Concentrically Braced

The seismic performance of two-storey steel buildings with concentrically braced frames as the lateral load resisting system is evaluated. The buildings are designed in accordance with the National Building Code of Canada (1995) and CSA Standard S16.1-94 for five seismic zones in western Canada. Only frames designed with a force modification factor of 1.5 are considered. Analytical models of the buildings are developed, which consider the nonlinear seismic behaviour of the concentrically braced frame, the shear strength of the roof diaphragm, and the stiffness and strength contributions of the nonstructural partitions. The seismic response is estimated with nonlinear static and dynamic time history analyses. Roof diaphragm flexibility does not influence the dynamic behaviour significantly. The distribution of lateral forces from response spectrum analysis agrees well with that specified. Current design procedures provide reasonable estimates of the lateral drift in low and moderate seismic zones. Brace ductility demands are reasonable and may be limited due to the contributions of nonstructural partitions. However, in moderate and high seismic zones, the connections, beams, columns, and roof diaphragm are overloaded. The capacity design procedure is recommended to provide adequate resistance to the overloaded components.Key words: analyses, capacity design, concentrically braced frame, diaphragm, dynamic, earthquake, low-rise, nonlinear, seismic design, steel.

scholarly journals Evaluation of Seismic Performance of Improved Rocking Concentrically Braced-frames with Zipper Columns

2020 ◽  
Author(s):  
Nasim Irani Sarand ◽  
Abdolrahim Jalali
Keyword(s):  
Time History ◽  
Nonlinear Time History Analysis ◽  
Braced Frames ◽  
Concentrically Braced Frames ◽  
Restoring Force ◽  
Braced Frame ◽  
Concentrically Braced Frame ◽  
Concentrically Braced ◽  
Rocking Behavior ◽  
Post Tensioned

Concentrically braced frames (CBFs) as one of well-known stiff and common lateral force resisting systems often show limited ductility capacity under severe earthquakes. This study proposes rocking zipper braced frame (RZBF) to improve the drift capacity of CBFs which is based on combination of rocking behavior and zipper columns. In the RZBF system, rocking behavior permit the braced frame to uplift during the earthquake and then restoring force induced through post-tensioned bars self-center the frame to its initial state. Also, zipper columns can decrease the concentration of damage by distributing the unbalance force at the mid bay over the frame’s height. To assess the performance of RZBF, a comparison study is carried out considering CBF, rocking concentrically braced frame, zipper braced frame and RZBF. For this purpose, some frames structures are designed and nonlinear time history analysis conduct under a set of earthquake records. Seismic responses such as roof drift ratio, gap opening at the column-base interface, forces of top story braces and post-tensioned bars are taken into consideration. The results show that the proposed RZBF has better performance among the others and zipper columns can improve the behavior of rocking systems.

scholarly journals Seismic Performance Analysis of Self-Centering Concentrically Braced Steel Frame Structures

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Ergang Xiong ◽  
Kun Zu ◽  
Qian Zhang
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Repeated Loading ◽  
Base Shear ◽  
Cross Sectional ◽  
Braced Frame ◽  
Residual Drift ◽  
Concentrically Braced Frame ◽  
History Analysis ◽  
Concentrically Braced

To study the seismic performance of self-centering concentrically braced frame (SC-CBF) structure, the static elastoplastic analysis, low-cycle repeated loading analysis, and elastoplastic time-history analysis were conducted for a four-story SC-CBF structure, compared with the traditionally concentrically braced frame (CBF) structure. The influences of different GAP stiffnesses and cross-sectional areas of prestressed tendon were investigated on the self-centering and seismic performance of the SC-CBF structure. The results show that the SC-CBF structure has a strong lateral resistance, a small base shear under earthquake action, and a slight residual drift after unloading. The SC-CBF structure has a better ductility than the CBF structure. The displacement of the SC-CBF structure under the action of rare and extremely rare earthquakes is large, and the structure can dissipate more energy; the interstory drift is large, but the residual drift is small, exhibiting its ideal seismic and self-centering performance. However, the mechanical behavior of prestressed tendons is significantly affected by the stiffness of the GAP. The mechanical and seismic performances of the overall structure are slightly affected by the stiffness of the GAP, but the cross-sectional area of the prestressed tendons has a remarkable influence on the overall performance of the structure.

Floor Spectra Estimates for an Industrial Special Concentrically Braced Frame Structure

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Roberto Javier Merino Vela ◽  
Emanuele Brunesi ◽  
Roberto Nascimbene
Keyword(s):  
Time History ◽  
Response Spectra ◽  
Frame Structure ◽  
Eurocode 8 ◽  
Industrial Complex ◽  
Braced Frame ◽  
Nonstructural Components ◽  
Floor Response Spectra ◽  
Concentrically Braced Frame ◽  
Concentrically Braced

Nonstructural components play an important role in the correct functioning of industrial facilities, which may suffer greatly from earthquake-induced actions, as demonstrated by past seismic events. Therefore, the correct evaluation of seismic demands acting upon them is of utmost importance when assessing or designing an industrial complex exposed to seismic hazard. Among others, nonlinear time history analyses (NLTHA) of structural systems including nonstructural elements and floor response spectra are well-known methods for computing these actions, the former being more accurate and the latter being less onerous. This work focuses on deriving floor spectra for a steel special concentrically braced frame (SCBF), which is a common type of lateral-load resisting system for industrial frames. The results are used to compute the seismic actions on a small liquid storage tank mounted on the case study frame. Additionally, the results are compared to those obtained by modeling the structure and the tank together, that is, by modeling the tank explicitly and incorporating it within the model of the support structure. To this end, a simple model, consisting of two uncoupled single degree-of-freedom systems, is used for the tank. The floor spectra resulting from both approaches are compared to establish differences in the behavior of the structure and nonstructural element/component. Finally, the seismic demand on the tank—obtained by direct and indirect analyses—is compared to that obtained by applying ASCE 7-10 and Eurocode 8 prescriptions.

scholarly journals The Effect of Local Fuse on Behavior of Concentrically Braced Frame by a Numerical Study

2018 ◽  
Vol 4 (3) ◽  
pp. 655 ◽  
Author(s):  
Ali Kachooee ◽  
Mohammad Ali Kafi ◽  
Mohsen Gerami
Keyword(s):  
Seismic Response ◽  
Numerical Study ◽  
Numerical Models ◽  
Compressive Loading ◽  
Braced Frames ◽  
Concentrically Braced Frames ◽  
Reduced Cross Section ◽  
Braced Frame ◽  
Concentrically Braced Frame ◽  
Concentrically Braced

The concentrically braced frames (CBFs) are one of the most widely used lateral load-resisting systems. Seismic performance of these structures has a weakness that is due to the brace buckling at a lower loading than the ultimate compressive loading capacity. In this paper, attempt is made to enhance the seismic response of CBFs through utilizing a local fuse. For this purpose, first the formulation of fuse area and length are presented. Then based on this formulation, several numerical models have been built and analyzed to examine the effect of implementing this fuse on seismic response of CBFs. From the analyses results, it is found that if the reduced cross-section fuse (RCF) is properly designed and also the end of brace is fixed, the CBFs with equal energy dissipation capacity, that are equipped with this fuse exhibit a better ductility than the customary CBFs.

scholarly journals Seismic Performance Evaluation of Steel Buildings with Oil Dampers Using Capacity Spectrum Method

2021 ◽  
Vol 11 (6) ◽  
pp. 2687
Author(s):  
Ahmad Naqi ◽  
Taiki Saito
Keyword(s):  
Seismic Performance ◽  
Response Spectrum ◽  
Damping Ratio ◽  
Time History ◽  
Linearization Method ◽  
Equivalent Linearization ◽  
Steel Buildings ◽  
Capacity Spectrum Method ◽  
Spectrum Method ◽  
Capacity Spectrum

This study proposes a capacity spectrum Method (CSM)-based procedure to estimate the maximum seismic performance of steel buildings passively controlled with bilinear oil dampers. In the proposed CSM, the maximum seismic response of a building was estimated, in the acceleration-displacement response spectrum, as the intersection between the capacity curve and the damping-adjusted demand curves, using the equivalent linearization method. The building equivalent damping ratio was determined by the sum of the inherent damping, and the square root of sum of squares (SRSS) of the hysteretic damping and the viscous damping of the supplemental oil devices. The calculation steps of the proposed CSM are explained in detail based on the equivalent single degree of freedom (ESDOF) system, and its accuracy was examined by comparison with time history analysis (THA) results. Two model steel buildings of 4 and 10 stories, uniformly equipped with oil dampers along the height, were subjected to six selected earthquake ground motions scaled to be compatible with Level-2 earthquakes, as defined in the Japanese Building Standard Law. The seismic performance of the buildings was estimated by the proposed CSM procedure and compared with the results of nonlinear THA in terms of the maximum story displacements and the shear forces. It was observed that the proposed CSM scheme provided a satisfactory accuracy to assess the maximum nonlinear response of steel buildings passively controlled with oil dampers.

Rehabilitation of steel concentrically braced frames with rocking cores for improved performance under near-fault ground motions

2016 ◽  
Vol 20 (6) ◽  
pp. 940-952 ◽  
Author(s):  
Bing Qu ◽  
Francisco Sanchez-Zamora ◽  
Michael Pollino ◽  
Hetao Hou
Keyword(s):  
Ground Motions ◽  
Braced Frames ◽  
Concentrically Braced Frames ◽  
Braced Frame ◽  
Near Fault ◽  
Modal Properties ◽  
Concentrically Braced Frame ◽  
Core Technology ◽  
Concentrically Braced ◽  
Near Fault Earthquakes

This article focuses on evaluating the adequacy of a seismic rehabilitation technology which adds rocking cores to deficient steel concentrically braced frames in near-fault regions. Two demonstration buildings were rehabilitated with the technology. Seismic performance of the rehabilitated buildings was evaluated through numerical simulations. Analysis results suggest that the code-compliant concentrically braced frames may be vulnerable to collapse under the fault-normal components of the near-fault ground motions, approximately having a probability of exceedance of 10% in 50 years. It is found that the Rocking Core technology is effective in reducing the inter-story drift responses of the demonstration buildings under near-fault earthquakes. The rehabilitated systems can further benefit from the use of hysteretic energy dissipating links between the rocking cores and existing concentrically braced frames. This article also addresses the influence of the rocking cores on modal properties of the rehabilitated buildings. It is found that the rocking core with moderate stiffness does not significantly alter the modal properties of a rehabilitated concentrically braced frame.

Sign in / Sign up

Export Citation Format

Share Document