Determination of aerobic work and power on a rope-braked cycle ergometer by direct measurement

2006 ◽  
Vol 31 (4) ◽  
pp. 392-397 ◽  
Author(s):  
Rae S. Gordon ◽  
Kathryn L. Franklin ◽  
Julien S. Baker ◽  
Bruce Davies
Keyword(s):  
Direct Measurement ◽  
Power Estimation ◽  
Cycle Ergometer ◽  
Mean Power ◽  
Physiological Assessment ◽  
Brake Force ◽  
The Mean ◽  
The Difference ◽  
Work Done

The purpose of this study was to compare the power and work outputs of a cycle ergometer using the manufacturer’s guidelines, with calculations using direct flywheel velocity and brake torque. A further aim was to compare the values obtained with those supplied by the manufacturer. A group of 10 male participants were asked to pedal a Monark 824E ergometer at a constant cadence of 60 r/min for a period of 3 min against a resistive mass of 3 kg. The flywheel velocity was measured using a tachometer. The brake force was determined by measuring the tension in the rope on either side of the flywheel. The calculated mean power was 147.45 ± 6.5 W compared with the Monark value of 183 ± 3.7 W. The difference between the methods for power estimation was 18% and was statistically significant (p < 0.01). The mean work done by the participants during the 3 min period was found to be 26 460 ± 1145 J compared with the Monark value of 33 067 ± 648 J (p < 0.01). The Monark formulae currently used to determine the power and work done by a participant overestimates the actual values required to overcome the resistance. There findings have far-reaching implications in the physiological assessment of athletic, sedentary, and diseased populations.

Comparison of two noninvasive techniques for estimating cardiac output during exercise

1986 ◽  
Vol 61 (1) ◽  
pp. 155-159 ◽  
Author(s):  
D. D. Hatcher ◽  
O. D. Srb
Keyword(s):  
Cardiac Output ◽  
Large Range ◽  
Impedance Plethysmography ◽  
Cycle Ergometer ◽  
O2 Consumption ◽  
Noninvasive Techniques ◽  
Transthoracic Impedance ◽  
The Mean ◽  
The Difference ◽  
Male Subjects

This study presents the comparison of two different noninvasive techniques for the estimation of cardiac output (Q). The two techniques used were transthoracic impedance plethysmography (Z) and the indirect Fick CO2 rebreathing (RB) method. Paired estimates of Q were made on 60 different male subjects at rest and during graded increments of work on a cycle ergometer. The mean resting Q as measured by the Z technique (COZ) was 7.46 +/- 0.35 and 5.96 +/- 0.43 l/min using the RB (CORB) technique. At 200 W the mean COZ was 18.67 +/- 0.72 l/min and the CORB was 23.73 +/- 0.84 l/min. Both the techniques were linearly correlated (R) with O2 consumption; i.e., RZ = 0.752, RRB = 0.855. The difference between these two R values is statistically significant (P less than 0.001). A linear relationship was found between the Z and RB techniques at all work loads (R = 0.75). This study suggests that both techniques are equally as reliable over a large range of work loads, with the Z technique being the simplest and most efficient to implement. It was also found that lung volume had no effect on the calculated COZ.

scholarly journals Acute ibuprofen ingestion does not attenuate fatigue during maximal intermittent knee extensor or all-out cycling exercise

2019 ◽  
Vol 44 (2) ◽  
pp. 208-215 ◽  
Author(s):  
Paul T. Morgan ◽  
Anni Vanhatalo ◽  
Joanna L. Bowtell ◽  
Andrew M. Jones ◽  
Stephen J. Bailey
Keyword(s):  
Exercise Performance ◽  
Power Output ◽  
Knee Extensor ◽  
Cycling Performance ◽  
Similar Rate ◽  
Cycle Ergometer ◽  
Knee Extensors ◽  
Mean Power ◽  
Healthy Humans ◽  
The Mean

Recent research suggests that acute consumption of pharmacological analgesics can improve exercise performance, but the ergogenic potential of ibuprofen (IBP) administration is poorly understood. This study tested the hypothesis that IBP administration would enhance maximal exercise performance. In one study, 13 physically active males completed 60 × 3-s maximal voluntary contractions (MVCs) of the knee extensors interspersed with 2-s passive recovery periods, on 2 occasions, with the critical torque (CT) estimated as the mean torque over the last 12 contractions (part A). In another study, 16 active males completed two 3-min all-out tests against a fixed resistance on an electronically braked cycle ergometer, with the critical power estimated from the mean power output over the final 30 s of the test (part B). All tests were completed 60 min after ingestion of maltodextrin (placebo, PL) or 400 mg of IBP. Peripheral nerve stimulation was administered at regular intervals and electromyography was measured throughout. For part A, mean torque (IBP: 60% ± 13% of pre-exercise MVC; PL: 58% ± 14% of pre-exercise MVC) and CT (IBP: 41% ± 16% of pre-exercise MVC; PL: 40% ± 15% of pre-exercise MVC) were not different between conditions (P > 0.05). For part B, end-test power output (IBP: 292 ± 28 W; PL: 288 ± 31 W) and work done (IBP: 65.9 ± 5.9 kJ; PL: 65.4 ± 6.4 kJ) during the 3-min all-out cycling tests were not different between conditions (all P > 0.05). For both studies, neuromuscular fatigue declined at a similar rate in both conditions (P > 0.05). In conclusion, acute ingestion of 400 mg of IBP does not improve single-leg or maximal cycling performance in healthy humans.

scholarly journals Acetaminophen ingestion improves muscle activation and performance during a 3-min all-out cycling test

2019 ◽  
Vol 44 (4) ◽  
pp. 434-442 ◽  
Author(s):  
Paul T. Morgan ◽  
Anni Vanhatalo ◽  
Joanna L. Bowtell ◽  
Andrew M. Jones ◽  
Stephen J. Bailey
Keyword(s):  
Muscle Activation ◽  
Femoral Nerve ◽  
Time Trial ◽  
Cycle Ergometer ◽  
Membrane Excitability ◽  
Mean Power ◽  
Cycling Exercise ◽  
M Wave ◽  
Cycling Test ◽  
Work Done

Acute acetaminophen (ACT) ingestion has been shown to enhance cycling time-trial performance. The purpose of this study was to assess whether ACT ingestion enhances muscle activation and critical power (CP) during maximal cycling exercise. Sixteen active male participants completed two 3-min all-out tests against a fixed resistance on an electronically braked cycle ergometer 60 min after ingestion of 1 g of ACT or placebo (maltodextrin, PL). CP was estimated as the mean power output over the final 30 s of the test and W′ (the curvature constant of the power–duration relationship) was estimated as the work done above CP. The femoral nerve was stimulated every 30 s to measure membrane excitability (M-wave) and surface electromyography (EMGRMS) was recorded continuously to infer muscle activation. Compared with PL, ACT ingestion increased CP (ACT: 297 ± 32 W vs. PL: 288 ± 31 W, P < 0.001) and total work done (ACT: 66.4 ± 6.5 kJ vs. PL: 65.4 ± 6.4 kJ, P = 0.03) without impacting W′ (ACT: 13.1 ± 2.9 kJ vs. PL: 13.6 ± 2.4 kJ, P = 0.19) or the M-wave amplitude (P = 0.66) during the 3-min all-out cycling test. Normalised EMGRMS amplitude declined throughout the 3-min protocol in both PL and ACT conditions; however, the decline in EMGRMS amplitude was attenuated in the ACT condition, such that the EMGRMS amplitude was greater in ACT compared with PL over the last 60 s of the test (P = 0.04). These findings indicate that acute ACT ingestion might increase performance and CP during maximal cycling exercise by enhancing muscle activation.

Differential pressure in shunt therapy: investigation of position-dependent intraperitoneal pressure in a porcine model

2013 ◽  
Vol 12 (6) ◽  
pp. 575-581 ◽  
Author(s):  
Florian Baptist Freimann ◽  
Jens Ötvös ◽  
Sascha Santosh Chopra ◽  
Peter Vajkoczy ◽  
Stefan Wolf ◽  
...  
Keyword(s):  
Body Position ◽  
Pressure Sensors ◽  
Differential Pressure ◽  
Intraperitoneal Pressure ◽  
Vertical Distance ◽  
Ventriculoperitoneal Shunting ◽  
Hydrostatic Force ◽  
The Mean ◽  
The Difference

Object The differential pressure between the intracranial and intraperitoneal cavities is essential for ventriculoperitoneal shunting. A determination of the pressure in both cavities is decisive for selecting the appropriate valve type and opening pressure. The intraperitoneal pressure (IPP)—in contrast to the intracranial pressure—still remains controversial with regard to its normal level and position dependency. Methods The authors used 6 female pigs for the experiments. Two transdermal telemetric pressure sensors (cranial and caudal) were implanted intraperitoneally with a craniocaudal distance of 30 cm. Direct IPP measurements were supplemented with noninvasive IPP measurements (intragastral and intravesical). The IPP was measured with the pigs in the supine (0°), 30°, 60°, and vertical (90°) body positions. After the pigs were euthanized, CT was used to determine the intraperitoneal probe position. Results With pigs in the supine position, the mean (± SD) IPP was 10.0 ± 3.5 cm H2O in a mean vertical distance of 4.5 ± 2.8 cm to the highest level of the peritoneum. The difference between the mean IPP of the cranially and the caudally implanted probes (Δ IPP) increased according to position, from 5.5 cm H2O in the 0° position to 11.5 cm H2O in the 30° position, 18.3 cm H2O in the 60° position, and 25.6 cm H2O in the vertical body position. The vertical distance between the probe tips (cranially implanted over caudally implanted) increased 3.4, 11.2, 19.3, and 22.3 cm for each of the 4 body positions, respectively. The mean difference between the Δ IPP and the vertical distance between both probe tips over all body positions was 1.7 cm H2O. Conclusions The IPP is subject to the position-dependent hydrostatic force. Normal IPP is able to reduce the differential pressure in patients with ventriculoperitoneal shunts.

scholarly journals Determination of LC and LB

1995 ◽  
Vol 10 ◽  
pp. 205-205
Author(s):  
T. Fukushima
Keyword(s):  
Time Scales ◽  
Full Paper ◽  
Numerical Integrations ◽  
Best Estimate ◽  
Analytical Formulas ◽  
The Mean ◽  
The Difference ◽  
Scale Difference ◽  
Astronomical Constants

The location-independent part of TCB-TCG, the difference between the two new time scales adopted by the IAU (1992), was integrated numerically for three JPL planetary/lunar ephemerides; DE102, DE200, and DE245. The differences among these three integrations were mostly explained by the difference in the adopted constants of the ephemerides. It was shown that the post-Newtonian correction and the perturbation by asteroids are negligible except for the mean rate, LC. The comparison of these numerical integrations with the analytical formulas of Hirayama et al. (1987) and Fairhead and Bretagnon (1990) as well as their extended versions lead to the best estimate of LC asCombining this with the recent value of the geoid potential in Bursa et al. (1992), we estimated the value of LB, the scale difference between TCB and TT, asTable I summarizes these conclusions. These estimates of LC and LB are more reliable than the former values we gave (Fukushima et al. 1986). The new estimate of LB will be useful in converting the numerical values of some precisely determined astronomical constants such as AU measured in meter from those in TDB to those in TCB. Also the numerically integrated TCB-TCG, which are to be called Time Ephemeris, will be useful when converting between TCB and TDB, i.e. the time scales themselves. The full paper will be appeared in A & A with the title of Time Ephemeris.

scholarly journals Komposisi Jenis Gastropoda di Mangrove Desa Kaliwlingi dan Sawojajar, Jawa Tengah

2020 ◽  
Vol 9 (2) ◽  
pp. 167-174
Author(s):  
Erik Wijaya Kusuma ◽  
Ria Azizah Tri Nuraini ◽  
Retno Hartati
Keyword(s):  
Mangrove Forest ◽  
Diversity Index ◽  
Gastropod Species ◽  
Mangrove Area ◽  
Central Java ◽  
Mangrove Ecosystems ◽  
The Mean ◽  
The Difference ◽  
Different Characteristics

ABSTRAK : Desa Kaliwlingi dan Sawojajar mempunyai kawasan hutan mangrove dengan karakteristik berbeda. Kawasan hutan mangrove Kaliwlingi menjadi ekowisata mangrove sejak tahun 2016, sedangkan di Sawojajar merupakan kawasan mangrove alami. Perbedaan fungsi tersebut diduga dapat mempengaruhi keanekaragaman hayati yaitu salah satunya adalah gastropoda. Tujuan dari penelitian ini adalah untuk mengetahui struktur komunitas Gastropoda di ekosistem mangrove Desa Kaliwlingi dan Sawojajar, Kab.Brebes, Jawa Tengah. Pengambilan sampel dilakukan pada bulan Juni sampai Juli 2018. Penentuan titik sampling menggunakan metode purposive pada 3 stasiun dengan tiga kali pengulangan. Hasil penelitian menunjukan terdapat 2 subkelas yaitu Pulmonata dan Prosobranchiata, dengan 3 famili dan  9 spesies gastropoda dari 3 famili, yaitu Elliobidae; Cassidula aurisfelis (Elliobidae), C. nucleus (Elliobidae), Littoraria articulate (Littorinidae), L. carinifera (Littorinidae), L. melanostoma (Littorinidae), L. scabra (Littorinidae), Telescopium telescopium (Potamididae), Terebralia obtuse (Potamididae), T. palustris (Potaminidae).  Nilai kelimpahan rata-rata gastropoda Desa Kaliwlingi dan Desa Sawojajar masing-masing 20,28 dan 16,36 Ind/m². Indeks Keanekaragaman (H’) gastropoda di kawasan mangrove Desa Kaliwlingi dan Desa Sawojajar termasuk ke dalam kategori rendah ke tinggi, sedangkan indeks keseragamannya  berkategori rendah.  Tidak ada jenis gastropod yang mendominasi di kawasan mangrove Kaliwlingi dan Sawojajar, dengan pola sebaran gastropoda mengelompok.ABSTRACT: Kaliwlingi and Sawojajar villages have mangrove forest areas with different characteristics. The Kaliwlingi mangrove forest area has been established as mangrove ecotourism since 2016, while in Sawojajar it is a natural mangrove area. The difference in function is thought to affect biodiversity, one of which is gastropods. The purpose of this study was to determine the structure of the Gastropoda community in the mangrove ecosystems of Kaliwlingi and Sawojajar Villages, Kab. Brebes, Central Java. Sampling was conducted in June to July 2018. Determination of the sampling points using purposive methods at 3 stations with three repetitions. The results showed that there were 2 subclasses, namely Pulmonata and Prosobranchiata, with 3 families and 9 gastropod species from 3 families, namely Elliobidae; Cassidula aurisfelis (Elliobidae), C. nucleus (Elliobidae), Littoraria articulate (Littorinidae), L. carinifera (Littorinidae), L. melanostoma (Littorinidae), L. scabra (Littorinidae), Telescopium telescopium (Potamebidide) ), T. palustris (Potaminidae). The mean abundance of gastropods in Kaliwlingi Village and Sawojajar Village were 20.28 and 16.36 Ind / m² respectively. Diversity Index (H ') of gastropods in the mangrove areas of Kaliwlingi Village and Sawojajar Village are in the low to high category, while the uniformity index is categorized as low. There is no type of gastropod that dominates in the Kaliwlingi and Sawojajar mangrove areas, and gastropod distributed as a grouped.  

THE MAINTENANCE OF A STANDARD OF ELECTROMOTIVE FORCE: NOTES ON STANDARD WESTON CELLS

1930 ◽  
Vol 3 (5) ◽  
pp. 473-489
Author(s):  
A. Norman Shaw ◽  
H. E. Reilley
Keyword(s):  
Electromotive Force ◽  
Essential Feature ◽  
Mean Deviation ◽  
Entire Group ◽  
Standard Cells ◽  
Characteristics Analysis ◽  
A Cell ◽  
The Mean ◽  
The Difference

A detailed procedure for the maintenance of a standard of voltage to within one or two parts in a million is described.In so far as these investigations have proceeded, neutral saturated cells have been found to be superior to acid cells as independent standards for a period of many years, though the latter are preferable for purposes of ordinary precision or shorter periods. The recommended code of procedure is briefly as follows: a number of cells should be constructed according to standard specifications with the new requirements of uniformity of container and speed of preparation, and observations made upon them every few days for a period of three months. The differences in electromotive force (at constant temperature) should be determined between each cell in the group and any one of them chosen arbitrarily as reference cell, and certain new selection and rejection rules applied. In accordance with these rules a cell should be rejected: (a) if its deviation from the mean electromotive force of the group has increased or decreased by 10 microvolts or more during the preceding two weeks; or (b) if it differs in electromotive force from the mean of the group by more than 10 +d microvolts where d is the mean deviation of the cells of the group. If d exceeds 20 microvolts the entire group should be considered untrustworthy. The selected cells should be observed for three additional months, the rejection rules again applied and if a specified proportion survive elimination, the initial reference mean of the laboratory may be established.At intervals of several months additional groups of cells, neutral and acid, should be constructed and exchanges made with laboratories possessing cells of known characteristics. Analysis of the resulting observations determines: (a) the constants in the aging* equation for the reference batch, and (b) the difference between the initial reference mean of the laboratory and the estimated value of the international reference mean.Examples of the analysis of cell observations are given, illustrating the establishment of the initial reference mean, the recapture of this value when the aging coefficients are known, and the preliminary determination of the aging equation for a given group of cells. The use of the aging equation is found to be the essential feature in the attainment of increased precision.A summary of data on standard cells is included.

scholarly journals Determination of Inulin in Foods

2000 ◽  
Vol 83 (3) ◽  
pp. 675-678 ◽  
Author(s):  
Breda Simonovska
Keyword(s):  
Standard Deviation ◽  
Oxalic Acid ◽  
Thin Layer ◽  
Degree Of Polymerization ◽  
Test Solution ◽  
Boiling Water Bath ◽  
Before And After ◽  
The Mean ◽  
The Difference

Abstract A method was developed for determining fructan inulin in various foods (yogurts, honey cakes, chocolates). Warm water was applied for extraction of samples, and mono- and dissacharides were determined by a thin-layer chromatographic densitometric method. A portion of the test solution was hydrolyzed 30 min with 1% oxalic acid in a boiling water bath. Fructose was determined in the hydrolysate. The amount of inulin in a sample was calculated as the difference between the amount of fructose in the sample before and after hydrolysis. The fructose from sucrose formed during the hydrolysis was also considered. The mean recovery from yogurt fortified with 4% inulin was 95.5 ± 4.5% (mean ± standard deviation); from honey cakes extract fortified with 10% inulin, 97.3 ± 5.5%; and from chocolate extract fortified with 30% inulin, 98.6 ± 6.6% (6 replicates in all cases). Determination of glucose is not necessary for analyzing fructans with the composition expressed shortened to GFn−1 (G, glucose; F, fructosyl) with the average degree of polymerization 8 ≤ n ≤ 15.

scholarly journals Establishment of a new relationship between posed smile width and lower facial height: A cross-sectional study

2015 ◽  
Vol 09 (03) ◽  
pp. 394-399 ◽  
Author(s):  
Aby Abraham ◽  
Jinu George ◽  
Elbe Peter ◽  
Koshi Philip ◽  
Rajesh Chankramath ◽  
...  
Keyword(s):  
Soft Tissue ◽  
Cross Sectional Study ◽  
Cross Sectional ◽  
Facial Height ◽  
The Face ◽  
Facial Proportions ◽  
Males And Females ◽  
The Mean ◽  
The Difference

ABSTRACT Objective: The present study is intended to add a new parameter that would be useful in orthodontic clinical evaluation, treatment planning, and determination of vertical dimension (at occlusion). Materials and Methods: Standardized videographic recording of 79 subjects during posed smile was captured. Each video was then cut into 30 photos using the free studio software. The widest commissure-to-commissure posed smile frame (posed smile width [SW]) was selected as one of 10 or more frames showing an identical smile. Lower third of the face is measured from subnasale to soft tissue menton using a digital vernier caliper. Two values were then compared. Ratio between lower facial height and posed SW was calculated. Results: The co-relation between smiling width and lower facial height was found to be statistically significant (P < 0.01). The ratio of lower facial height and smiling width was calculated as 1.0016 with a standard deviation (SD) = 0.04 in males and 1.0301 with an SD = 0.07 in females. The difference between the mean lower facial height in males and females was statistically significant with a t = 10.231 and P = 0.000. The difference between the mean smiling width in males and females was also statistically significant with a t = 5.653 and P = 0.000. Conclusion: In class I subjects with pleasing appearance, normal facial proportions, normal overjet and overbite, and average Frankfort mandibular angle, the lower facial height (subnasale to soft tissue menton) is equal to posed SW.

LTCC Piezoelectric Transducer for Energy Harvesting

2015 ◽  
Vol 2015 (CICMT) ◽  
pp. 000105-000111
Author(s):  
Arkadiusz P. Dabrowski ◽  
Slawomir Owczarzak ◽  
Henryk Roguszczak ◽  
Leszek J. Golonka
Keyword(s):  
Energy Harvesting ◽  
Output Power ◽  
Lead Zirconate Titanate ◽  
Piezoelectric Transducer ◽  
Lead Zirconate ◽  
Mean Power ◽  
Optimum Load ◽  
Resonance Frequencies ◽  
The Mean ◽  
The Difference

In this paper, design, technology and properties of multi cantilever transducer for energy harvesting application were described. The piezoelectric transducer was made in LTCC (Low Temperature Cofired Ceramics) technology using PZT (Lead Zirconate-Titanate) based tape. In such devices the highest power can be reached at resonance frequencies of the cantilevers. Eight bimorph transducers with lengths corresponding to 33, 50, 58, 66, 75, 82, 91 and 100 Hz resonant frequency, were designed. The transducers were polarized in serial or parallel configuration. To avoid voltage reduction in the system of a few piezoelectric bimorphs, rectifiers were applied for each cantilever. Transducers had optimum resistance in ranges of 60–140 kΩ and 300–600 kΩ for bimorphs poled in parallel and serial configuration, respectively. The mean output power under sinusoidal excitation with 20 μm vibration amplitude calculated from all maxima at resonant frequencies for optimum load, were equal to 10.3 μW and 12.4μW for parallel and serial configurations with rectifier. Without rectifier the values were equal to 18.2 μW for both the transducers. In case of mean output power, the difference between both the transducers was not really significant, however at higher frequency the maximum power was higher for serial configuration. Besides, the output voltage obtained in serial bimorph was higher than in parallel one. The mean power density for all the resonant peaks measured at 0.41 g was equal to 210 μW/cm3/g and 360 μW/cm3/g with and without rectifier, respectively.

Sign in / Sign up

Export Citation Format

Share Document