scholarly journals Erratum: “A theoretical and experimental evaluation of the microangiographic fluoroscope: A high-resolution region-of-interest x-ray imager” [Med. Phys. 38, 4112-4126 (2011)]

2011 ◽  
Vol 38 (8) ◽  
pp. 4903-4903
Author(s):  
Amit Jain ◽  
D. R. Bednarek ◽  
Ciprian Ionita ◽  
S. Rudin
1998 ◽  
Vol 5 (3) ◽  
pp. 246-251 ◽  
Author(s):  
Yonglian Yan ◽  
Eiji Shigemasa ◽  
Akira Yagishita

The design and experimental evaluation of a high-resolution varied-line-spacing-grating monochromator constructed at the Photon Factory are described. Various applications of a varied-line-spacing grating in a high-performance soft X-ray monochromator are discussed.


2007 ◽  
Vol 34 (6Part18) ◽  
pp. 2563-2563
Author(s):  
G Yadava ◽  
S Rudin ◽  
A Kuhls ◽  
D Bednarek

Author(s):  
Mario Pacheco ◽  
Deepak Goyal

Abstract The development of a next generation high-resolution x-ray Computed Tomography (CT) tool and its applications are reported in this paper. Some of the key features are region of interest capability, improved time-to-data, improved usability, and data collection automation capability. We also discuss the key technical challenges that are faced by x-ray CT technology. Critical cases that are hard or not possible to isolate by alternative methods are also discussed. Examples include Controlled Collapse Chip Connection (C4) bump cracking and “invisible” non-wetting analysis, ball grid array (BGA) solder joint cracking, and wirebond microcracking and wirebond shorting, as well as demonstration of progressive testing capability.


Author(s):  
Gabriel C. Lander ◽  
Robert M. Glaeser

This mini-review provides an update regarding the substantial progress that has been made in using single-particle cryo-EM to obtain high-resolution structures for proteins and other macromolecules whose particle sizes are smaller than 100 kDa. We point out that establishing the limits of what can be accomplished, both in terms of particle size and attainable resolution, serves as a guide for what might be expected when attempting to improve the resolution of small flexible portions of a larger structure using focused refinement approaches. These approaches, which involve computationally ignoring all but a specific, targeted region of interest on the macromolecules, is known as ‘masking and refining,' and it thus is the computational equivalent of the ‘divide and conquer' approach that has been used so successfully in X-ray crystallography. The benefit of masked refinement, however, is that one is able to determine structures in their native architectural context, without physically separating them from the biological connections that they require for their function. This mini-review also compares where experimental achievements currently stand relative to various theoretical estimates for the smallest particle size that can be successfully reconstructed to high resolution. Since it is clear that a substantial gap still remains between the two, we briefly recap the areas in which further improvement seems possible, both in equipment and in methods.


2014 ◽  
Vol 56 (4) ◽  
pp. 315-323 ◽  
Author(s):  
Andreas Keuler ◽  
Christian Taschner ◽  
Marc Alexander Brockmann ◽  
Hanne Boll ◽  
Katharina Förster ◽  
...  

Author(s):  
E. A. Sivers ◽  
D. A. Holloway ◽  
W. A. Ellingson

Reliability continues to be an issue in the development of ceramic components for high-temperature, high-wear applications in advanced engine designs. Recently, high-resolution, three-dimensional, X-ray computerized tomography (XRCT) has been shown to be invaluable for inspecting relatively small components. However, the time and system capacity required to collect complete high-resolution data for large ceramic objects is often prohibitive. When only the critical regions of a large component need be inspected with high resolution, region-of-interest XRCT is a viable alternative. By using local XRCT methods on data taken through only the critical area, it is possible to reconstruct flat, “edge-enhanced” images in which density differences are clearly delineated. We present XRCT results from local scans of critical regions in a large, pressure-slip-cast, Si3N4 turbine rotor and two Si3N4 test phantoms. We also illustrate how the method can be extended to larger assemblies of ceramic components.


1971 ◽  
Vol 15 ◽  
pp. 424-434
Author(s):  
W. S. Andrus ◽  
L. P. VanSpeybroeck ◽  
E. M. Kellogg ◽  
H. Gursky

Proposed experiments in X-ray astronomy require a detector capable of forming a high resolution image of a weak source. An X-ray image intensifier incorporating a microchannel plate (MCP) has been studied as a candidate for this application. Experiments have shown that the device is sensitive to single X-ray photons and has adequate quantum efficiency. Consideration has been given to the possibility of improving the quantum efficiency by deposition on the input surface of the MCP of a material with high photoelectric yield in the wavelength region of interest. Photographs of the output light from the image intensifier show than an X-ray photon detected at the MCP results in a spot on the film of about 60μ M diameter. Since the position of the centroid of the spot could be determined to better accuracy, the device h as sufficient resolution for the contemplated experiment. Detector noise is found to be so low that it would no limitation on the experiment's sensitivity. The image can be retrieved and transmitted to the ground by focussing a television camera on the face of the fiber optic output of the X-ray image intensifier; the data show that a Secondary Electron Conduction vidicon is sensitive enough to se e the output resulting from a single X-ray photon. An alternative technique would sense charge pulses from the MCP on a fine wire grid, avoiding the need for a phosphor and providing superior time resolution and simpler data compression. Since the detector is to be used in a satellite-borne experiment, its space qualification must be established. Two launches on sounding rockets have failed to impair the usefulness of one unit that has been studied over a period of more than a year. A long term test of continuous performance in high vacuum has so far shown encouraging results. A count life test has shown that an MCP can last through detection of orders of magnitude more counts than could be expected in the course of a mission. X-ray image intensifiers appear entirely suitable for high resolution X-ray astronomy.


Sign in / Sign up

Export Citation Format

Share Document